Re: 85 lwb turbo 5.3 build
2 Attachment(s)
YAY!!! Our motor came in today. Looks pretty nice. It has all the stuff it says it came with. Very fast shipping too. Missed my motor mounts today hope i am here when they delever them tomorrow.
|
Re: 85 lwb turbo 5.3 build
3 Attachment(s)
Got 90% of the harness removed. I could not get the rest out beacuse the motor is kinda sitting on the pallet funny and trapping it. Should be able to get motor stand next week. I removed one valve cover and the intake to take a peek. Valve cover area looks real nice. The valves are nasty. I am thinking of removing the heads to clean them up and maybe put head studs in. May have them ported someware. Not sure yet. When i get the pan off i will make up my mind about removing the heads. That is atleast 500 bucks for gaskets and studs i did not want to spend.
|
Re: 85 lwb turbo 5.3 build
1 Attachment(s)
one more
|
Re: 85 lwb turbo 5.3 build
What year motor did you get?
If you don't mind where did you get it and how much? |
Re: 85 lwb turbo 5.3 build
It's a 2002 and I paid 800
Posted via Mobile Device |
Re: 85 lwb turbo 5.3 build
I think i have my turbo selected. It is a tc78 from turbonetics. Have not made my mind up about ball bearing or not. I had a good conversation with a dealer and he says it is not nessary at this time. Would only help spool buy a few hundred rpm. But it will cost almost 370 more bucks. So i may skip it. I should be able to order it in a few weeks. Untell them my mouts came in and as soon as i get my poly mounts for the frame i will install motor for moc up of turbo exhaust pipes.
|
Re: 85 lwb turbo 5.3 build
1 Attachment(s)
Got my frame mount inserts installed. May drop the motor in tomorrow if rain will let me.
|
Re: 85 lwb turbo 5.3 build
3 Attachment(s)
I got the motor in and it went very smooth. No mount issues like my burb had. Only issue i had was i did not notice my converter slid out and i tryed to bolt motor to trans and converter stopped spinning easy. Good thing i checked that when i was bolting motor to trans. So i had to loosen the motor and push the converter back. After i got that figured out motor bolted up perfect. I have lots of room under the pan between the crossmember. But my origanl plan with turning the manifolds around and pipeing them to turbo is not going to work. There is no room between the motor and the frame. So it looks like i will have to use a log type manifold on passenger side and stock maniflod on driver side in normall possition and run it down and to the driver side log. Any ways here is the pics so far. The air filter is just temporary.
|
Re: 85 lwb turbo 5.3 build
I ordered my turbo last night and it should be here in a week or so. I am looking for a fuel cell that will bolt in under the bed. does any one make such a thing?
|
Re: 85 lwb turbo 5.3 build
Well it is way past a week but the turbo SHOULD be here the 10th. Says fedex. Cant wait to see it!
|
Re: 85 lwb turbo 5.3 build
Looking good. I have a 84lwb an can't decided if turbo or tvs1900. Ill be watching your build. I know nolimit, cpp an there is also a user on here who makes gas tanks for rear under bed. Tomorrow I can get the links when at home. On my phone an work nights
Posted via Mobile Device |
Re: 85 lwb turbo 5.3 build
I would prefer a under bed one but have not found any for a 73-87. I went with a turbo cause they can be cheaper. Let me say Easyier to buy cause I only have to buy one thing at a time. Not 5-6 k all at onece
Posted via Mobile Device |
Re: 85 lwb turbo 5.3 build
I want a turbo..... lol but for mudding i would rather have a supercharger but they are ungodly amounts more expensive as far as yours goes what boost are you planning on running? i might've missed it somewhere
|
Re: 85 lwb turbo 5.3 build
I will be running 15 or less pounds. That's the plan anyways.
Posted via Mobile Device |
Re: 85 lwb turbo 5.3 build
i hear you on the cost being easier for a turbo. im hoping i find someone with a charger who's wanting to go turbo an sell cheap. seen several at 3-4k. but didnt have the $ at time. so far only found this one for the tank for rear UNDER BED tank. i cant seem to find the other links i had saved/
http://www.nolimitparts.com/prodinfo.asp?number=B5-TNK http://www.performanceonline.com/197...ill-agt7387-b/ |
Re: 85 lwb turbo 5.3 build
5 Attachment(s)
Turbo showed up today!
|
Re: 85 lwb turbo 5.3 build
nice!
|
Re: 85 lwb turbo 5.3 build
I'm wanting to boost my 5.3 as well. I'll be watching this. If you get anywhere near 15 lbs, that truck will haul nuts.
Posted via Mobile Device |
Re: 85 lwb turbo 5.3 build
Turbonetics, can't go wrong with them. If you need more turbo info:http://www.theturboforums.com/forum.php There is very detailed turbo info and builds there.
|
Re: 85 lwb turbo 5.3 build
Not a hole lot has happened. I did get a car harness in a trade i will use for this. So i will now use a ls1/6 intake. That helps with finding injectors and fuel rails that can handle the fuel i will be flowing. Almost have the money for the manifolds too!
|
Re: 85 lwb turbo 5.3 build
How much fuel are you planning to flow? Mine ran pretty good with a single Bosch0411, single -6 feed, 60 lb/hr siemens, and a STOCK truck fuel rail.
|
Re: 85 lwb turbo 5.3 build
Not sure. I am planing on 60 pound injectors. -8 feed and -6 return.
Posted via Mobile Device |
Re: 85 lwb turbo 5.3 build
15psi is halfway to 30 so you might as well just go to 30psi lol just to see how much power you can really make... =-p
|
Re: 85 lwb turbo 5.3 build
Stock junkyard record is 996 to the wheels. That is stock block pistons rods even 799 stock heads.
Posted via Mobile Device |
Re: 85 lwb turbo 5.3 build
anything new on this build?
|
All times are GMT -4. The time now is 09:11 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com