Originally Posted by niterider65 (Post 5241463)

I would sure like an original rear step bumper if possible an a choke cable also for the 65 thanks :metal::chevy:
Bill

Originally Posted by niterider65 (Post 5241485)

darn almost for got also looking for an dash speaker mount and radio mount for the dash if have to ill buy the radio for the mount Thanks :metal::chevy:

Originally Posted by Modges'66 (Post 5241541)

I'm looking for a decent frt crossmember for a 66 1/2 ton...

Originally Posted by Hardrockz28 (Post 5241661)

Need a tail gate and all hardware for 66 fleet side
Posted via Mobile Device

Originally Posted by AngryPirate (Post 5241713)

How much for the instrument cluster?

Originally Posted by rideblue00 (Post 5242722)

Looking for a 4 pc set of fleetside rear bumper brackets for my 66.

Originally Posted by stevenb (Post 5242855)

How much for a short fleetside bed, what condition is it in?
Posted via Mobile Device

Originally Posted by GMCNUT (Post 5244422)

The 60-63 cluster has a broken speedo needle and is 30.00 but I think we have another one w/ good speedo needle for 50.00

We also have a 64-66 for 50.00

50.00 clusters have all wiring uncut too.

Not sure which one you need?

Originally Posted by LostMy65 (Post 5243004)

How much for something, I mean anything....? :D
Posted via Mobile Device

Originally Posted by GMCNUT (Post 5244433)

Well, apologies - with a 7 truck stash and over 200 parts all in one wad there was just no good way to price every single piece without taking up the whole parts board so I decided it was in everyones best interest to let everybody view the 200+ shots and start asking questions and go from there until I can figure out a cleaner way.....

Originally Posted by LostMy65 (Post 5244350)

At least the Lights, Wipers, and the other one of the three that I can't remember what it does right at this moment. :o

Originally Posted by AngryPirate (Post 5244432)

My truck is a 61, but if the 64-66 fits and works, then lets roll with that as it has more gauges built into the dash itself and the uncut harness wiring would be nice too.

Should I wait to here back from you or Sweptline about the dash sheetmetal as well (via PM)?

If you want me to just send payment for the dash cluster, then we can do that for now.

Thanks,
AP

Originally Posted by GMCNUT (Post 5244441)

OK - here are the problems

1) the 64-66 dash will only work if you replace the whole underdash harness - it is all different than 60-62.
2) the hole for the dash cluster is shaped different on 60-63 than 64-66 so I do not think they will smoothly interchange anyway.

So you should probably stick to a 60-62 dash like the 50.00 one I said does have the wiring and good speedo needle

On the dash sheetmetal I took pics of a nice 1960 dash that may work for you - just need your email to send them and see what you think.

Originally Posted by GMCNUT (Post 5244436)

lights wiper and choke - lights I have, wiper can be deluxe w/ 2 speed wiper washer squirter in the center or no squirter button for single speed wipers. Need to know what wiper motor you have. The Choke is maybe there but no sure - headlight knob = 5.00 wiper w/ no squirter = 5.00 w/ squirter knob only comes with a switch so 15.00 and choke if I have it is 20.00 and comes w/ cable.

Shipping will be like 6 bucks or so....

Originally Posted by GMCNUT (Post 5244405)

We have a 6 cyl metal shroud and I think we have a set of factory V8 shroud brackets but no V8 shroud. The V8 shroud braces are 30.00 for the set. They are getting particularly hard to find anymore and I think out of 7 trucks we only got one set....shipping determined from your zip code after I box them, but shouldn't be much 10 to 15 bucks to get them shipped on Priority or approx 1/2 that for Parcel post

Originally Posted by GMCNUT (Post 5244370)

Apologies for the high price, but I sold two of these for 400.00 each on Ebay last year after I cleaned them up and repainted them and made sure they worked and included a new master cyl and used pwr brake pedal pad. I intend to do the same to this one and put it on Ebay too, but if you are OK with the price I will still do all the cleanup and buy the new master cyl etc just like it would be for Ebay - normally when you buy an original booster, it does not work - when they do not work you have to send them off to be rebuilt. Rebuilding is 250.00 to 350.00 depending on what it needs so that is why the considerable expense for a working 100% complete unit. It also has 100% of its original and corrrect marked bolts and hardware. Think about it, and weigh your options and let me know.

Originally Posted by GMCNUT (Post 5244262)

The side trim is very nice and is being sold as a 100% complete ready to be polished set - appears to be pretty close to ding free if not.....175.00 for the complete set and that includes the short fleet box pieces.

Originally Posted by 62 short step (Post 5244602)

I'll take the v 8 shroud brackets, pending shipping price to 70739.

Thanks, Jeremy.

Originally Posted by duallyjams (Post 5244648)

Thanks anyway. I have 2 trucks. I just bought one 100 shipped.I will keep looking.

Originally Posted by 62 short step (Post 5244602)

I'll take the v 8 shroud brackets, pending shipping price to 70739.

Thanks, Jeremy.

Originally Posted by 65Okasai (Post 5245505)

Fleetside tailgates?
Posted via Mobile Device