Re: 1967 Mustang Coupe Build (Electra)
yeah i was careful when i did that...I made sure to paint under the lip and check under the car to see if it had issues!!
Thanks! |
Re: 1967 Mustang Coupe Build (Electra)
As a physical therapist assistant, don't overdo the stress placed on the newly made ligament of your ACL! Did the graft come from one of your hamstrings?
However, looking good on the project!Don't you hate welding on old rusty metal! I looked at that steering system, looks great except for the welding of the pitman arm. That would always worry me! |
Re: 1967 Mustang Coupe Build (Electra)
Yeah I basically leaned against the bumper and stuck my leg out straight...Im actually laying here icing it the knee now! I try not to do too much and always have my brace on. the graft was from hamstring...A quadruple hamstring ACL reconstruction
The thing about the steering system was he did it from a manual setup and wasn't sure about it with a power assist steering.... |
Re: 1967 Mustang Coupe Build (Electra)
My car actually handles well without power and it doesn't have the slop that thread described. My c10 on the other hand WILL get power, it sucks in parking lots.
Posted via Mobile Device |
Re: 1967 Mustang Coupe Build (Electra)
Ive only drove the stang once so im not sure...I did notice the front shock wasnt centered on the busing in the engine bay so that could be an issue too! lol
|
Re: 1967 Mustang Coupe Build (Electra)
That's generally where it gets us, we slip, do the wrong move, something usually dumb! lol
I installed the Flaming river rack n pinion (power) and a FR steering column. I wouldn't suggest this system. It was 2000 or so. Looks ok, and it works, seems the turning radius isn't all too great. The u-joint in the tilt column got a little slop in it and it irritates me to no end, it's only like less than a 1/4". If I had it to do over, I like this system below and it fits where the stock unit goes. Just do your homework and get in no rush. You'll have plenty of time, and plenty to do for a while! Don't buy anything until you talk to us! lol ; ) http://www.borgeson.com/xcart/catalo...ng-p-1510.html |
Re: 1967 Mustang Coupe Build (Electra)
Yeah!!! I will be taking the build slowly especially with the Dr bills and electrical stuff. I will definitely appreciate and look forward to yalls advice...
|
Re: 1967 Mustang Coupe Build (Electra)
Ok finished the trunk...Used the whole quart lol! Might of over did it but the trunk is open and since it wont be raining im going to leave it open all night to dry
|
Re: 1967 Mustang Coupe Build (Electra)
Quote:
|
Re: 1967 Mustang Coupe Build (Electra)
Quote:
|
Re: 1967 Mustang Coupe Build (Electra)
glad i checked the weather....Calling for sprinkles tonight...Thought it was suppose to be clear...O well closed the trunk...Let the stang stink! lol
|
Re: 1967 Mustang Coupe Build (Electra)
Yeah buddy! Just think those fumes are building up but the good thing is, is though it's closed at least the heat of the truck is helping it dry probably, and when your able to open the truck it'll just help make it not stink haha
|
Re: 1967 Mustang Coupe Build (Electra)
Hey Jeff, I know this may sound funny but can you take a picture and post it on here so I can see what kind of can the Por-15 is, I'm looking to buy some soon and I would hate to buy the wrong stuff.
Thanks man! |
Re: 1967 Mustang Coupe Build (Electra)
LOL i trashed it but ill send you the think...Also remember its not UV protected so you need to paint over it with something if it will be in the light
POR-15 Rust Preventive Paint - Black - Quart... |
Re: 1967 Mustang Coupe Build (Electra)
The POR-15 was dried this morning and after my physical therapy I scuffed and cleaned it then coated it with 3 coats of Dupli Color Bed Armour...Ill post pics later when its a bit dry
|
Re: 1967 Mustang Coupe Build (Electra)
Ranger, first off, nice job on your stang... but please be careful of that ACL and welding that close to the tank... I'd hate to see something happen... Bill
|
Re: 1967 Mustang Coupe Build (Electra)
2 Attachment(s)
Still not completely dry but the matte finish of Bed Liner is much nicer and with a quart of POR-15 and 3 Coats of Bed Armour im pretty sure the trunk will hold up lol
|
Re: 1967 Mustang Coupe Build (Electra)
Boy, that brings back memories! I finished my 67. The pictures are as it sits today. I have had the car for over 37 years and completed a ground up on her in 96. The only waver from stock was a new R134A A/C system and I'm currently changing the crappy OEM power steering to a GM type.
http://i161.photobucket.com/albums/t...Mustang012.jpg http://i161.photobucket.com/albums/t...67Mustang2.jpg |
Re: 1967 Mustang Coupe Build (Electra)
Quote:
|
Re: 1967 Mustang Coupe Build (Electra)
Sweet!!! thanks for the links Jeff you da man!!!
Awesome job on the truck man it looks sharp.....got to hand it to you!! Your a man of many talents working on an old school truck and an old school mustang you my friend have the best of both worlds haha |
Re: 1967 Mustang Coupe Build (Electra)
Quote:
Mine is an early 67 with the harpoon steering shaft so I took the engine out for easier R&R. The early type requires that you cut the column and I didn't want to do that so I went with the Ididit unit. I also considered A R&P setup but the only one on the market that is actually designed specifically for the Mustang is made by Total Control products(TCP). It's VERY expensive. The other R&P providers modify existing manufacturers racks to retro fit and they all have bump steer problems and loss of turning radius. |
Re: 1967 Mustang Coupe Build (Electra)
Gosh Dt1, that is a nice Mustang! back to factory, much more difficult to achieve than a restomod!
and yes, if I had known that loss of turn radius was going to happen with my Flaming river power rack, I wouldn't have chosen that direction, however I've never encountered bump steer~ thank goodness! |
Re: 1967 Mustang Coupe Build (Electra)
Quote:
I also got a little nosy and looked at your profile. Your 67 is gorgeous! |
Re: 1967 Mustang Coupe Build (Electra)
Thank you! below is the build portion on my 67 regarding the Flaming river rack. It show n tells what I had to do, put up with and fix. Today I'm pleased with it, except for the occasion of getting in a tight spot and having to back up and forward a few times to maneuver the car~ ; ) Originally, I was going to go with manual steering, then I got bit by upgradeitis! lol
http://www.classiccarsandtools.com/2...nstallation-2/ |
Re: 1967 Mustang Coupe Build (Electra)
Quote:
I too appreciate working on clean stuff. Although I'm not really into resto-mod, I really appreciate it when it's done properly. I have always been one for stock. Here's a couple of bikes I've done in the past... http://i161.photobucket.com/albums/t...ps41b5dca7.jpg http://i161.photobucket.com/albums/t...ps90dd6b11.jpg http://i161.photobucket.com/albums/t...ps2304df9d.jpg http://i161.photobucket.com/albums/t.../DT1-E0012.jpg |
All times are GMT -4. The time now is 06:10 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com