Re: "DOORED" my truck this weekend
 

Stop being such a nice guy, and work on your own vehicle!! Sweeeet lookin truck, though!!

Re: "DOORED" my truck this weekend
 

Any progress on this wanna see it layin door on 22's gunna look killler....your truck was my inperation(sp?) to stock floor bodydrop mine to the rockers....

Re: "DOORED" my truck this weekend
 

Just got done switching jobs... Now I can work on it again($$)! The firewall hasnt happened yet. Will post more pics on the 10th. with the rim and tire combo even if it wont fit in the front lol :crazy: in the 3rd pic the rear is up at ride height :crazy:

Re: "DOORED" my truck this weekend
 

just noticed the pics looks so awsome... got any with the 22's yet. by the way what kinda smoothies are they?

Re: "DOORED" my truck this weekend
 

you are building my dream. looks killer

Re: "DOORED" my truck this weekend
 

The firewall will be done this weekend... need to get some more $$ for tires now, I am getting the underdash brake setup first, and it's expensive!

Re: "DOORED" my truck this weekend
 

do you have any problems with the bascspacing on those centerline wheels i was looking at those but in 20's but was told the backspacing was to much....

Re: "DOORED" my truck this weekend
 

Looking good man I have my entire firewall shaved as well!, as for SIXTY8c10 i'll try to post some progress pics of my truck 4 ya n sorry it took so long to respond just hardly been getting on, but i got tons of new pics so yeah. my bad though.

Re: "DOORED" my truck this weekend
 

Here is a question. It may be stupid, but I am going to ask it anyway, haha. I am not sure how similar out trucks are but my bumper is level with the bottom of my rocker panel. Right now, I have 3" spindles and a 4.5" Z on my frame sitting in my garage and the bumper is 1/2" off the ground and the rocker will sit flat. If I wanted to cut the rockers off (red area) so that the doors layed on the ground, then what do I do about the bumper area (circled with ?)? Would I have to cut say 3.5" (height of the rocker) off the bottom of the bumper? Did you run into this?

Re: "DOORED" my truck this weekend
 

new pics this week for sure.... been working Overtime @ work l:banghead:

The bumper area: I am just going to drag the bumper FLAT on mine.

Re: "DOORED" my truck this weekend
 

Ok, I reread your original post.

Re: "DOORED" my truck this weekend
 

Heres some new pics FINALLY!
Like the crossmember and upper control arm rework ? I cant run 15" rims with my new lowers either they touch the rim with spindles.
I still have to drill the hole for the column, and wait for the underdash brakes to get here.

Re: "DOORED" my truck this weekend
 

Are you getting enough oxygen sitting up that high in the air? ;)

:metal:

Re: "DOORED" my truck this weekend
 

Hey its only 4' 2" How tall is yours?:floss: When/if I do finally decide to chop the top it will be under 4' :crazy: :lol:

Re: "DOORED" my truck this weekend
 

Please don't chop the top. It looks good as it is.

Re: "DOORED" my truck this weekend
 

looks badass bro... are the BYC upper and lower arms? cant wait to see the 22's.....

Re: "DOORED" my truck this weekend
 

Thats a NO on the control arms... they are one-offs :) I am however selling the BYC LCA'S for $100 you would just need to make a center Shaft, get bushings and balljoints.

Re: "DOORED" my truck this weekend
 

ok the arms look sweet, i went with ART UCA and LCA.

Re: "DOORED" my truck this weekend
 

Is that motor going to fit under the stock hood?

Ditto.

Re: "DOORED" my truck this weekend
 

With the way it was the carb held the hood up alone... If I can manage ground clearance I will lower the motor some. thanks guys!

Re: "DOORED" my truck this weekend
 

Any idea how the hood will fit?????? Looks like it will be sitting on top of the tires??

Re: "DOORED" my truck this weekend
 

Now would be the time to put in the rack if your still thinking about it.
I just re-did my to eliminate the possibility of bump steer.

Re: "DOORED" my truck this weekend
 

any update????

Re: "DOORED" my truck this weekend
 

See what you started....lol[IMG]http://streetsourcemag.com/uploads/O...005AM23381.jpg[/IMG]

Re: "DOORED" my truck this weekend