The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   1967 - 1972 Chevy/GMC Suburbans and PanelsProjects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=212)
-   -   Project Family Hauler (https://67-72chevytrucks.com/vboard/showthread.php?t=373497)

drewskiren 10-19-2010 09:10 PM

Re: Project Family Hauler
 
Awesome work, Can I have that section of your burb????

68 TT 10-20-2010 03:17 PM

Re: Project Family Hauler
 
Great work so far. Keep it up.

Can't wait to see it on the road.

pickup67man 10-21-2010 05:29 PM

Re: Project Family Hauler
 
Quote:

Originally Posted by 68 TT (Post 4250882)
Great work so far. Keep it up.

Can't wait to see it on the road.

I can't wait either. My daughter is 2 1/2 years old. I hope I still need the family hauler when it is finished. Progress is slow. After the door is done it should start moving faster.

68 TT 10-21-2010 06:11 PM

Re: Project Family Hauler
 
Quote:

Originally Posted by pickup67man (Post 4252944)
I can't wait either. My daughter is 2 1/2 years old. I hope I still need the family hauler when it is finished. Progress is slow. After the door is done it should start moving faster.

Tell me about it. My daughters keep me so busy I get next to nothing done on the cars or house.

Before them I could build a nice car from a pile of old parts in 3 months. Now I will be lucky if it only takes 3 years. They are worth it though.

pickup67man 10-24-2010 10:53 PM

Re: Project Family Hauler
 
I seem to work slow. Worked on it all day and it doesn't look like I did much again. Instead of modifying another latch area of the door jamb I just made one. I copied the passenger front door latch area. Installed it on the rear of the drivers side B pillar. The fourth door latches.:metal:

B pillar is not done but it is getting boxed in piece by piece.

[IMG]http://farm5.static.flickr.com/4103/...3fe2aa9a78.jpg[/IMG]

[IMG]http://farm2.static.flickr.com/1312/...00ed6a33b0.jpg[/IMG]

[IMG]http://farm2.static.flickr.com/1394/...f6d0b514b3.jpg[/IMG]

pickup67man 02-16-2011 12:07 AM

Re: Project Family Hauler
 
Want to say there is progress but there is not.
Plans for new garage this year will help future progress. :metal:
Need more room because here in Washington we have 364 days of rain per year and welding in the rain isn't good. 220 volts and water don't mix.

67chevy1series 02-16-2011 12:09 AM

Re: Project Family Hauler
 
well when you MAKE PROGRESS DONT FORGET ABOUT US!

Dieselwrencher 02-16-2011 03:15 AM

Re: Project Family Hauler
 
That's great to hear you will be getting an area to work in! I know your pain, I do my share of working outside in the elements each day.

swamp rat 02-16-2011 04:10 AM

Re: Project Family Hauler
 
Quote:

Originally Posted by pickup67man (Post 4489788)
Want to say there is progress but there is not.
Plans for new garage this year will help future progress. :metal:
Need more room because here in Washington we have 364 days of rain per year and welding in the rain isn't good. 220 volts and water don't mix.

Thats some great news! Um, not the 220 and water part..

jbclassix 06-22-2011 07:13 PM

Re: Project Family Hauler
 
Any progress? I need some do's and don'ts for my door!!!!!!

jbclassix 06-22-2011 08:44 PM

Re: Project Family Hauler
 
Seriously though, I have gone through your, frizzle fry, and rokcrln builds many many times! For your window frames did you use more than 2 doors? I would like to avoid cutting up my extra left door.

pickup67man 06-23-2011 06:04 PM

Re: Project Family Hauler
 
Quote:

Originally Posted by jbclassix (Post 4750017)
Any progress? I need some do's and don'ts for my door!!!!!!

Don't try to weld under an awning on a rainy day in Washington. (The rain lasts for 10.5 months):waah:

Do be patient. I am fixing problem this summer with a new garage. Permits are in order for new garage and work should start by August. Still need to tear old garage down first. Then I can work inside. :clap:

Seriously, what I did on my window frame was aquire 2 rusted out suburban front doors for free and use the square window frames to build the one I needed. I did a mirror image of the right rear door. My window frame isn't permanent yet since the door isn't finished.

I used one drivers door to start, one passenger door so the body line will line up and two old rusty (and I mean rusty) suburban doors for the frames only. Combine this with the inner panel from the suburban and the hinges from a F*$d and I have a door that opens suicide, the window rolls up & down and it latches on the B pillar with the original truck hardware.

Still have a long way to go to make it look good.

Have fun

pickup67man 06-23-2011 06:30 PM

Re: Project Family Hauler
 
Proof that I am being productive.

Hole in yard from buried treasure
http://i763.photobucket.com/albums/x..._7747217_n.jpg

The treasure that I found
http://i763.photobucket.com/albums/x...2_474890_n.jpg

These are the puddles from the nonstop rain. Didn't go away until May
http://i763.photobucket.com/albums/x..._3492154_n.jpg

Even when the puddle was gone the ground was mush. This is from the bobcat.
http://i763.photobucket.com/albums/x..._6752240_o.jpg

New position of the garage
http://i763.photobucket.com/albums/x..._1156449_o.jpg

This was the fun I had. 6 trips for a total of 45000 lbs of 1 1/4" minus to firm up the ground.
http://i763.photobucket.com/albums/x..._4966175_o.jpg

http://i763.photobucket.com/albums/x..._5701750_o.jpg

jbclassix 06-23-2011 10:39 PM

Re: Project Family Hauler
 
MMMMM, bet that dump trailer wasn't even there behind that D-max! Thanks for the info on the doors. I'm wondering how far I can get with the two pick-up doors... Good luck on the garage!

68 TT 06-24-2011 12:09 PM

Re: Project Family Hauler
 
Quote:

Originally Posted by pickup67man (Post 4751923)
...These are the puddles from the nonstop rain. Didn't go away until May

Glad you are making progress on the shop.

It still hasn't really stopped raining for more than a few days. By last weekend we already have 30% more rain than we typically get in a whole month.

pickup67man 06-24-2011 04:02 PM

Re: Project Family Hauler
 
Quote:

Originally Posted by 68 TT (Post 4753304)
Glad you are making progress on the shop.

It still hasn't really stopped raining for more than a few days. By last weekend we already have 30% more rain than we typically get in a whole month.

And you are on the drier side of the hills.
Drove the other truck on a poker run and to a show last week. I'm rethinking the heater/defroster delete I did. Also the drag radials out back. Paper towels for a defogger sucks and hydroplaning with the family isn't fun. The suburban will be all weather friendly so I can drive it more than 2 days a year.

pickup67man 06-24-2011 04:06 PM

Re: Project Family Hauler
 
Quote:

Originally Posted by jbclassix (Post 4752406)
MMMMM, bet that dump trailer wasn't even there behind that D-max! Thanks for the info on the doors. I'm wondering how far I can get with the two pick-up doors... Good luck on the garage!

It slowed me down a little but thats what happens with an extra 12,000 lbs. On one trip the gravel alone was 9300 lbs!!!
That worries my wife because I can haul lots of other junk home with ease. Just look at the back yard, toys everywhere.

68 TT 06-26-2011 11:16 AM

Re: Project Family Hauler
 
Quote:

Originally Posted by pickup67man (Post 4753686)
...Drove the other truck on a poker run and to a show last week. I'm rethinking the heater/defroster delete I did. Also the drag radials out back. Paper towels for a defogger sucks and hydroplaning with the family isn't fun. The suburban will be all weather friendly so I can drive it more than 2 days a year.

I know what you mean. Wait until the drag radials wear down a little more then try to drive it in bad weather. They wear down really fast on the street.

pickup67man 06-26-2011 04:24 PM

Re: Project Family Hauler
 
Quote:

Originally Posted by 68 TT (Post 4756561)
I know what you mean. Wait until the drag radials wear down a little more then try to drive it in bad weather. They wear down really fast on the street.

How pathetic am I? The drag radials have been on the truck for 10 years and I raced it once in 2001. The rest of the time has been on the street and they still aren't worn out. I need to drive it more so they will wear out, then I can get new tires and the Coys I want. Wife can't argue about the purchase if it is needed.

68 TT 06-28-2011 03:13 PM

Re: Project Family Hauler
 
Quote:

Originally Posted by pickup67man (Post 4756972)
How pathetic am I? The drag radials have been on the truck for 10 years and I raced it once in 2001. The rest of the time has been on the street and they still aren't worn out. I need to drive it more so they will wear out, then I can get new tires and the Coys I want. Wife can't argue about the purchase if it is needed.

Wow, you really know how to baby a set of tires :) Mine wore out to zero tread depth in two months on the street.

They work better at zero tread depth until you hit the non-tread compound layer but are not street legal or safe if the roads are even damp let alone wet.

Go have some fun and wear those tires out so you can get the Coys.

rondog4416 06-28-2011 09:31 PM

Re: Project Family Hauler
 
hey pickup67man are you just off Steward in Puyallup?i'm over off 162 and 410, hope to meet ya sometime

pickup67man 06-28-2011 10:33 PM

Re: Project Family Hauler
 
Quote:

Originally Posted by rondog4416 (Post 4761383)
hey pickup67man are you just off Steward in Puyallup?i'm over off 162 and 410, hope to meet ya sometime

Yes, downtown Puyallup. Apparently I went by your house a week ago on my was back from the Kingsmen run in Orting. I hope to drive it more this year.

swamp rat 06-29-2011 12:31 AM

Re: Project Family Hauler
 
Quote:

Originally Posted by pickup67man (Post 4761554)
Yes, downtown Puyallup. Apparently I went by your house a week ago on my was back from the Kingsmen run in Orting. I hope to drive it more this year.

Where did you find out about the run? find a flyer? There was a lot of classic cars on the road saturday. Thanks!

pickup67man 06-29-2011 09:09 PM

Re: Project Family Hauler
 
Quote:

Originally Posted by swamp rat (Post 4761839)
Where did you find out about the run? find a flyer? There was a lot of classic cars on the road saturday. Thanks!

Don't remember where I found out about it. Have been doing that run for 10 years. Missed 2008 only because my daughter was 2 months old and I still had bucket seats in truck. It is Saturday on Fathers Day weekend, poker run starts in Tacoma and was 50 miles long. My speedo is way off so that is a guess.

pickup67man 06-29-2011 09:17 PM

Re: Project Family Hauler
 
Hey swamprat I must have been near your house when I found my gas guage was also having issues. Was at Sprinker at a poker run stop and my engine sputtered. Almost died on Pac Ave. My fuel pressure started jumping and I stopped at the Gas Boy around 166th.


All times are GMT -4. The time now is 02:39 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com