Re: LS1 into a 73 cheyenne
3r!c84
The little guy was $240 in the polish $200 for the natural finish |
Re: LS1 Swap to a 73 cheyenne
..
|
Re: LS1 into a 73 cheyenne
..
|
Re: LS1 Swap to a 73 cheyenne
3 Attachment(s)
gas tank
|
Re: LS1 Swap to a 73 cheyenne
I'm not a big fan of Airtex or Carter Fuel pumps. I would have grabbed a Delco. They just seem to out last the rest.
|
Re: LS1 into a 73 cheyenne
You may already know but you need different clamps and high pressure hose between the pump and sender, The low pressure hose will blow or the plastic clamps will give, causing a major fuel leak inside the tank.
|
Re: LS1 into a 73 cheyenne
x2............change to high pressure hose and plastic to stainless clamps
|
Re: LS1 into a 73 cheyenne
thanks for the input will upgrade the clamps
|
Re: LS1 into a 73 cheyenne
2 Attachment(s)
new bumper
|
Re: LS1 into a 73 cheyenne
1 Attachment(s)
nade shifter
|
Re: LS1 into a 73 cheyenne
Quote:
|
Re: LS1 into a 73 cheyenne
looking good man! you arent messing around!
btw, what mount plates are you going with for the LSx? |
Re: LS1 into a 73 cheyenne
5 Attachment(s)
btw, what mount plates are you going with for the LSx?[/QUOTE]
the motor mount plates are from S&P, allows you to bolt LS-1 to original V-8 motor mounts |
Re: LS1 into a 73 cheyenne
Looking Good!
|
Re: LS1 into a 73 cheyenne
Sweet!
|
Re: LS1 into a 73 cheyenne
5 Attachment(s)
Keep it cool, so i got my electric fan today and I just finished mounting it. The fan is from Jegs its their dual 12'' S-blade reversible but im going to run it as a puller, sweet fan it eavan had a rubber type cushion. For the wiring i used the Perma Cool's adjustable prope type Kit. Dual fans require a 30 Amp relay sold separately, 160°F - 210°F "Vari-Cool" adjustable electronic fan control. To mount it i used Perma Cool's metal strap kit, had to bend to custom fit.
|
Re: LS1 into a 73 cheyenne
5 Attachment(s)
more pics
|
Re: LS1 into a 73 cheyenne
2 Attachment(s)
..
|
Re: LS1 into a 73 cheyenne
nice....very nice
|
Re: LS1 into a 73 cheyenne
nice dog bone lol and the parts are good too lmao
|
Re: LS1 into a 73 cheyenne
right on man... the pics say a thousand words! good stuff!! thanks for the reply also:metal:
|
Re: LS1 into a 73 cheyenne
I apologize for the deleted double posts, my thread got moved and caused double posts
|
Re: LS1 into a 73 cheyenne
Very cool build i keep debating on putting the ls into my truck as well. I was at half off sale a few months ago and saw a ls motor out of a camaro getting wheeled up to the cash register. I was sick to my stomach.....if only i was there earlier.
|
Re: LS1 into a 73 cheyenne
3 Attachment(s)
This is how it sits now, after the swap the front will rise about 2" +or- due to the lighter aluminum block. I will have to adjust the front suspension to have it sit like this again.
|
Re: LS1 into a 73 cheyenne
1 Attachment(s)
..
|
All times are GMT -4. The time now is 09:22 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com