Re: The 5.3 Blazer build
Quote:
Justin |
Re: The 5.3 Blazer build
dang there are alot of familiar faces on this forum!
I'm lsx10 on performancetrucks.net |
Re: The 5.3 Blazer build
Hey Buddy!
Justin |
Re: The 5.3 Blazer build
5 Attachment(s)
Attachment 607990
Attachment 607991 Attachment 607992 Attachment 607993 Attachment 607994 Fuel System is done. Thanks Bob for the Help.:lol: |
Re: The 5.3 Blazer build
5 Attachment(s)
Attachment 607995
Attachment 607996 Attachment 607997 Attachment 607998 Attachment 607999 Cam install and springs are on. |
Re: The 5.3 Blazer build
5 Attachment(s)
Attachment 608000
Attachment 608001 Attachment 608002 Attachment 608003 Attachment 608004 Brake System is done. Four wheel disc. |
Re: The 5.3 Blazer build
5 Attachment(s)
Attachment 608009 Lunati Gold Valve springs
Attachment 608005 ABS Plastic Trans Dust cover Attachment 608006New driveshaft Attachment 608007 Attachment 608008 |
Re: The 5.3 Blazer build
5 Attachment(s)
Attachment 608010
Attachment 608011 Attachment 608012 Attachment 608013 Attachment 608014 Started the wire harness. New RCI seats and Grant Steering wheel. Been Busy getting things together. Thought Id share my progress. Should have the harness tied in this week. Little every night after work. Hopefully start it up this weekend!:metal: Justin |
Re: The 5.3 Blazer build
2 Attachment(s)
Attachment 608015 Painted my Tan Dash with some Dupli color gray. Used Bull Dog Primer to seal it.
Attachment 608016 Cragars I found. Justin |
Re: The 5.3 Blazer build
5 Attachment(s)
Attachment 608243 Used some spackle paint on the tank, and bought some Eastwood Tank Sealer.
Attachment 608244 Putting the Interior back in order. Attachment 608245 Gray paint Attachment 608246I found a New dip stick for the TH-350. I was afraid I was gonna have to buy a Lokar Flex on. Auto Zone had it. Spectra. Nice thing about this one is the Tube Mount isn't welded on. You can bend it tightly on the tube and bolt it down. Little tight on the top handle near the fire wall. But nothing I can't get to. Attachment 608247 The noodles I need a few buddys and full day. Bust this sucker out. Soo close. Can't wait! Justin |
Re: The 5.3 Blazer build
4 Attachment(s)
Got the Dash Finished. It painted up nice.
Attachment 608530 Auto Meter Phantom Gauges in the stock bezel. The Aluminum panel I fabbed up fit like a glove. Put the turn signal, hi-beam and check eng lights in. Might have to put a diode on the Blue Hi-beam. Man it bright! Attachment 608531 The gauges look neat behind the Grant leather wheel. Mounted the Monster Tach. Still have to wire that baby Attachment 608532 Pumb the heater core and the fresh painted inner fenders. Routing the engine wires and started hooking them up. The engine bay sure got smaller with the fenders in there. Attachment 608533 Building a mount for the Be Cool Radiator tonight. After that I should be ready to rock. :metal: Justin |
Re: The 5.3 Blazer build
Coming along nice. I don't know why it did not occur to me that I could paint any dash to match my truck.
|
Re: The 5.3 Blazer build
5 Attachment(s)
Quote:
The Radiator mount is Finished. Spent Sunday afternoon building it. Attachment 609908 Attachment 609909 Attachment 609910 Attachment 609911 Attachment 609912 Only have $35 bucks in it. Think it turned out good. Most important, It dose it job. Got the steering Column wired in. Gonna take a few days break. Too damn hot here. It hit 102 yesterday. That sucks in my Metal barn! Maybe I can get the wiring finished next few days. It's time consuming work! Justin |
Re: The 5.3 Blazer build
2 Attachment(s)
Quote:
Attachment 609914 Attachment 609915 2"Beltech drop spindles, Ground Force 3"drop coils, and the local Axle & Spring shop built me some new 3" drop springs. No de-arched used. New leafs. They did that for $180. Helps I know the owner well. Now it looks better. Not so much like a 4X4 Damien! :lol: Justin |
Re: The 5.3 Blazer build
Looks much better :metal:
|
Re: The 5.3 Blazer build
It's RUNNING!!!!
|
Re: The 5.3 Blazer build
Sweet!!!!:D
|
Re: The 5.3 Blazer build
Sounds awesome.
|
Re: The 5.3 Blazer build
Thanks guys! been a long road!!
|
Re: The 5.3 Blazer build
5 Attachment(s)
Just installed the exhaust.
The muffler shops around here didn't act like they wanted to fool with me. So I bought a 2 1/2" U-fit kit from Jeg's and a Pair of S/S 40Flowmasters. It was a cut and fit thing! Besides my ugly welds, I think it came out ok. Even though the Driver side was a the fickle, I was able to tuck the pipe enough to clear the ground and the stock trans cross member. Attachment 625229 Attachment 625230 Attachment 625231 Attachment 625232 Attachment 625233 Dump over the Axle. Here is a Video of it Trying to Idle! Needs a Good tune Real bad!:lol: But you can hear the 227/233 .584LFT Lunati Voodoo cam Lope. Getting the ECM sent off this week for tuning. Justin |
Re: The 5.3 Blazer build
I'm LOVING' the sound of that cam! I'm thinking Fred needs one now....... :D
The exhaust looks great too! If it doesn't leak, it's all good! |
Re: The 5.3 Blazer build
Quote:
Fred would be nasty with any cam!:metal: Justin |
Re: The 5.3 Blazer build
Sweet! I forgot about that myself! PM sent.
|
Re: The 5.3 Blazer build
I've been away for awhile. I lost my Father the 2nd of Sept. And just have been taking care of my family.
Kinda put my project on the back burner. But thing's are getting better. I now have the ECM retuned for my cam. Night and day. Been driving "Ruby" quite a bit. Justin |
Re: The 5.3 Blazer build
Sorry about your dad, I lost my mom 3 years ago and it has been the hardest thing I have ever done. But it dose get better.
And I love the sound of the blazer..:metal: Trav |
All times are GMT -4. The time now is 03:52 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com