Re: Inline 250 - T3 Turbo - w/ Video
 

I wanted to keep the stock look of the intake/exhaust manifolds, just make them flow better. I hogged the factory 1bbl out to accept a 2bbl. I figured I would try it, if it didn't work, I would buy an Offenhauser. It seems to be working just fine. I believe with the Clifford, you cannot run the factory exhaust manifold, so running a simple J-pipe, as a charge pipe to the turbo would not work.

I have changed the springs out in the HEI and it runs even better. I had the heavy springs and it was not advancing quickly enough, causing a rich bog. I may even try the lightest springs and see how it reacts. I switched out the 31 for a #28 squirter and changed the accelerator pump cam to the white one in position 1. It is all fine tuning from here on, the AEM uego is a huge help. I highly recommend.

Re: Inline 250 - T3 Turbo - w/ Video
 

awesome truck...love it!!!

Re: Inline 250 - T3 Turbo - w/ Video
 

Very cool, I can't wait to see some more updates on your truck. I like the stock look with subtle performance mods. Keep up the great work.

Re: Inline 250 - T3 Turbo - w/ Video
 

Very,very,very cool!! I love it!

Re: Inline 250 - T3 Turbo - w/ Video
 

Very cool I have a 6 truck and was looking to sell it. After seeing this I could see my mind changing. Nice work.

MB

Re: Inline 250 - T3 Turbo - w/ Video
 

I just saw this thread for the first time. Very cool! I like the build over all. A lot like what I would like to do with my small block, a budget turbo set up. Very cool! :metal:

Re: Inline 250 - T3 Turbo - w/ Video
 

Just saw this engine in another thread. Very cool! The turbo almost looks like it was meant to be there. Any status updates?

how are you controlling boost? vac line straight from the manifold to the waste gate?

Re: Inline 250 - T3 Turbo - w/ Video
 

sub scribed! Nice GMC!

Re: Inline 250 - T3 Turbo - w/ Video
 

[/QUOTE]

how are you controlling boost? vac line straight from the manifold to the waste gate?[/QUOTE]

I am using the factory internal wastegate that is on the turbo. The only problem that it was a HD which means the PSI range was like 17-30 psi. So I was hitting 19 psi at times! I modified the wastegate to open earlier by designing a spring assist.

Check it out if you like:

http://youtu.be/rogCn4AJYsY

To control boost, there is a port on the intake side of the turbo that connects to the wastegate.

Re: Inline 250 - T3 Turbo - w/ Video
 

The truck is running great. I have set the wastegate to open at 10 psi. I drove it over 300 miles last week with no problems. The only issues is that my 1st gear in my T5 is trashed. It will not stay in, pops out everytime. I love driving it and hearing that turbo spool up and wastegate flutter out. Here is a pic of the finished engine as it sits. Possibly a intercooler set up this winter.

https://lh6.googleusercontent.com/-I...0/DSC_1435.JPG

Re: Inline 250 - T3 Turbo - w/ Video
 

Wow pretty cool mod on the waste gate! Could you not find a WG set at around 8 psi or did you want the HD one so its easier to push higher?

Are you doing anything for your PCV system while your in boost?

Re: Inline 250 - T3 Turbo - w/ Video
 

I wanted to use what I had, b/c a new one was a 100 bucks. Plus, I can always turn this one up.

There is no PVC system, I am running a crankcase vent though. I have two inline valve cover breathers connected to a 45 deg nipple port on my exhaust about 3' down the downpipe. It suprisingly provides alot of suction or vacuum to pull positive pressure out.
Posted via Mobile Device

Re: Inline 250 - T3 Turbo - w/ Video
 

oh cool venting into the exhaust seems to be the best way to do it.

Re: Inline 250 - T3 Turbo - w/ Video
 

Awesome engine. Makes me wish I hadn't ditched my 250.

Re: Inline 250 - T3 Turbo - w/ Video
 

subscribed

Re: Inline 250 - T3 Turbo - w/ Video
 

this thread is making me have some serious second thoughts about gettin rid of my 250 as well...hrm where does the turbo start boosting?

Re: Inline 250 - T3 Turbo - w/ Video
 

very cool! Love the engine bay vibe too!

Re: Inline 250 - T3 Turbo - w/ Video
 

If you mean, WHEN?, It spools up quick around 1500 rpms. The engine is not a high RPM machine, so shifting is pretty quick. The psi's climb really quick, when my wastegate was not working correctly, at around 1500 rpm it was 1-2psi and at 2000 rpm it was at 15psi +! I had to get out of it quick.

I still want to put a intercooler on it this winter and swap the T5 out for one that 1st gear actually works. All in all, very pleased.

Re: Inline 250 - T3 Turbo - w/ Video
 

Subscribed! Im going to get my 250 rebuilt in december then follow exactly in your footsteps! 66 GMC and all!!

Re: Inline 250 - T3 Turbo - w/ Video
 

yea thats what i meant! lol it was something i had always wondered because all of the turbo cars i have experience with seem to boost around 3000 and i dont really like to go much higher than that with mine. thats really awesome tho, if i knew how to subscribe i would! this is really cool and i think im going to look into it for sure

Re: Inline 250 - T3 Turbo - w/ Video
 

Did you destroy first gear , or do you think it was on it's way out ??

Re: Inline 250 - T3 Turbo - w/ Video
 

i believe that is a synchro issue. It will not stay in first at all with a load. Also, this trans is loud! Mabey all T5's are noise, I dont know. I have a clean NWC donor (the tailshaft swapper) that I will install soon.
Posted via Mobile Device

Re: Inline 250 - T3 Turbo - w/ Video
 

Very cool build. The inlines are such great engines

Re: Inline 250 - T3 Turbo - w/ Video
 

very cool set up !!!!!!!!!! one question , in your opening post it says GN T3 turbo . i assume that would be a grand national turbo ? as in a buick GN

Re: Inline 250 - T3 Turbo - w/ Video
 

You are correct. Its from a low mile 87 Buick Grand National, factory wastegate and elbow.
Posted via Mobile Device