Re: Parting 71 BB burb
 

1) all lower chrome, driver quality, a few screw holes and some dings $50 plus shipping
2) heater
3) all 3 door edge guards $20 plus shipping
4) tinted wings $60 plus shipping
5) front door panel chrome

Re: Parting 71 BB burb
 

1) inner grill is nice, outer has a few dings but still good $125
2) visors are good $25 plus shipping
3) mirror is good $25 shipped

Re: Parting 71 BB burb
 

kkkfjhgkh

Re: Parting 71 BB burb
 

No big deal Randy.
If I want it,... I'll make a trip to your place.

Re: Parting 71 BB burb
 

Randy how much for the bb bucket seat brace under the floor and the under floor supports for the buckets?I would like to have them if you feel like drilling out a few spot welds.Thanks

Re: Parting 71 BB burb
 

Junkie, I take them out I usually just cut the floor board and all on the front one. I get $100 plus shipping for the set. Thanks Randy

Re: Parting 71 BB burb
 

Teeitup, you are correct I do need all the brackets to bolt the seat down to floorboard. My seat (I just found out last night) does have the black tube brackets. So I won't be needing those, I do want the armrests and seatbelts and the bolts to secure them in place. Basically I have a second seat in my suburban to flies around in the back with no brackets, armrests or seatbelts. LOL. Thanks.

Re: Parting 71 BB burb
 

Randy,

How much for a complete reverse light assy? Shipped to 28314.

Thanks

Smitty

Re: Parting 71 BB burb
 

sierragrande71, Pm'd you
71meangreen, the pass side housing is missing the socket. Wiring is bad. I can get a pic
Junkie, here are some pics, which ones of the back ones are you wanting

Re: Parting 71 BB burb
 

1) pass side outer rear
2) driver side outer rear

Re: Parting 71 BB burb
 

The front is good as is and I need the inner and outer rear on both sides.I don't need the fartherest rear on each side with the phillips head screws as they are the factory bench holes.I would like the 4 screws if they will come out without a hassel to plug mine.Thanks I sent pm with shipping address

Re: Parting 71 BB burb
 

is the hatch still for sale?

Re: Parting 71 BB burb
 

Junkie, I'll try to get them cut out Tues and get you a quote hopefully but it may be Wed evening
Rickbost, yes it is but shipping to you would be high. I priced it shipping to La and it was $90 through fed ex. But if you want me to get you a quote I will.
Thanks Randy

Re: Parting 71 BB burb
 

pics for Sean

Re: Parting 71 BB burb
 

Just pm'd you randy.

Re: Parting 71 BB burb
 

Junkie, got them cut off. I think I may of cut the 2 inner rear ones just a little bit short. I'll get quote tonight hopefully. Thanks Randy

Re: Parting 71 BB burb
 

I'm interested. Does it require 12V supply and a ground? Does it work? How much?

Re: Parting 71 BB burb
 

Wes, the fan was working when I pulled the burb into the yard, it had a wire going to fuse box and a knob on the left side of the dash bezel that you turn, they drilled a hole and put switch though. it take 2 hoses that come in from bottom, I had to cut them so you'd need hoses. I can get a pic of where it was installed. I got it completely taken out tonight. $40 plus shipping for it. Thanks Randy

Re: Parting 71 BB burb
 

more parts

Re: Parting 71 BB burb
 

more yet

Re: Parting 71 BB burb
 

So it uses engine coolant and ties into the heater hoses? Do you have the tees? If it is just regular heater hose the cut hoses are a non-issue.

Re: Parting 71 BB burb
 

yes it uses the engine coolant, and yes its just regular heater hose, I'll throw in the tees. I'll get pics of tees and where thw switch goes Wed evening. Thanks Randy

Re: Parting 71 BB burb
 

Pm'd you Randy. Thanks.

Re: Parting 71 BB burb
 

Ill pass.

Thanks Randy

Smitty

Re: Parting 71 BB burb
 

Randy, If you get no takers on the Ac and willing to ship- I need the plastic to finish my burb- I know it's a hasle thanks