Re: Jimbo's 67 Long bed step side build
1 Attachment(s)
Inside roof tacked to header, then relieve cuts in the top made, bent down and then welded.
|
Re: Jimbo's 67 Long bed step side build
1 Attachment(s)
Section all welded, ready to do next section. Had also removed the running lights on the roof and will be patched later.
|
Re: Jimbo's 67 Long bed step side build
1 Attachment(s)
Just showing how the top is starting to flow to the windshield. Will have to wait and finish the center section, when body is off frame, can't reach to good.
|
Re: Jimbo's 67 Long bed step side build
1 Attachment(s)
Went back and added filler pieces to the door opening, to have a better gap.
|
Re: Jimbo's 67 Long bed step side build
1 Attachment(s)
New power brake booster and MC came in. Installed to check fit (came from CPP).
|
Re: Jimbo's 67 Long bed step side build
3 Attachment(s)
Pic 1 New cowl hood installed, not to bad will need some adjustment.
Pic 2 New rear fender installed to replace the old spare tire fender. This is a 68 with the side marker, which will be modified and a gas fill door installed. Pic 3 Another view. |
Re: Jimbo's 67 Long bed step side build
3 Attachment(s)
Pic 1 Going to install one piece side windows. So I removed the vent windows, etc.
Pic 2 This bracket needs to be removed. Pic 3 Here it has been removed. Will finish the install when the kit arrives. |
Re: Jimbo's 67 Long bed step side build
Hope you enjoyed today's post, see you tomorrow.....Jim
|
Re: Jimbo's 67 Long bed step side build
2 Attachment(s)
Pic 1 New left rear fender, side marker cut out and new gas filler door installed (Hagan).
Pic 2 Close up view. |
Re: Jimbo's 67 Long bed step side build
1 Attachment(s)
Front end all removed, you can also see new front stabilizer bar.
|
Re: Jimbo's 67 Long bed step side build
1 Attachment(s)
Starting to work on rear fenders.
|
Re: Jimbo's 67 Long bed step side build
2 Attachment(s)
Pic 1 Right rear fender, needs lots of TLC, cracked at stake pocket area.
Pic 2 Right rear fender stripped, before doing repairs. |
Re: Jimbo's 67 Long bed step side build
1 Attachment(s)
My son grinding down the welds across the back of top.
|
Re: Jimbo's 67 Long bed step side build
1 Attachment(s)
Here you can see the welding up of the seam at the back of top, ready to do next section.
|
Re: Jimbo's 67 Long bed step side build
2 Attachment(s)
Pic 1 Here I'm cutting out bad section in the rear fender.
Pic 2 New patch piece ready to install. |
Re: Jimbo's 67 Long bed step side build
3 Attachment(s)
Pic 1 Need to do a little finer grinding on the welds of top.
Pic 2 Welds dressed on back of top, holes filled for the running lights, all paint stripped off top of cab. Pic 3 Another view. |
Re: Jimbo's 67 Long bed step side build
3 Attachment(s)
Pic 1 Checking out the inside of cab, and floor.
Pic 2 Right side will need pieces cut out and repaired. Pic 3 Left side in worse shape, but fixable. |
Re: Jimbo's 67 Long bed step side build
2 Attachment(s)
Pic 1 Here most of the cab and doors have been stripped.
Pic 2 Bad pic, but working on the pass. side. |
Re: Jimbo's 67 Long bed step side build
Well, that's it for today. Tomorrow comes quick.
|
Re: Jimbo's 67 Long bed step side build
2 Attachment(s)
Today we start on rear fenders.
Pic 1 Inside of rear fender, after getting rid of tar, ready for blasting. Pic 2 Another shot. |
Re: Jimbo's 67 Long bed step side build
1 Attachment(s)
Blasted and coated with encapsulator paint.
|
Re: Jimbo's 67 Long bed step side build
3 Attachment(s)
Pic 1 Found a rust hole at front of cowl.
Pic 2 Patched Pic 3 Better pic. |
Re: Jimbo's 67 Long bed step side build
3 Attachment(s)
Pic 1 Gas filler area to be covered.
Pic 2 Putting in patch piece. Pic 3 Ready for welding. |
Re: Jimbo's 67 Long bed step side build
2 Attachment(s)
Pic 1 All welded in
Pic 2 Another view, a little more clean up and then ready for filler. |
Re: Jimbo's 67 Long bed step side build
1 Attachment(s)
Jimbo the owner, stripping paint from bed.
|
All times are GMT -4. The time now is 05:32 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com