The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 3 of 13

Last »

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - OR Serpentine belt conversions (https://67-72chevytrucks.com/vboard/showthread.php?t=503044)

tll74

08-16-2012 02:07 AM

Re: Serpentine belt conversions

4 Attachment(s)

Quote:

Originally Posted by dbstepside (Post 5540084)

any pics of a bbc setup, also what style p/s pump comes with this kit? also would you happen to have the air comp. delete pulley if so would setup be less $ without the compressor?

Here's some pics of one of two. They are both the same. The P/S pump is a conventional Saginaw pump with dual return ports. I don't have the delete pulley. I can do 60.00 less if I keep the AC pump. Thanks, Tom

tll74

08-16-2012 02:14 AM

Re: Serpentine belt conversions

Quote:

Originally Posted by rushingg149 (Post 5540608)

:chevy:I'm looking for a set to put on a 1970 Chevy 1 ton with a 396 BB. What do you have that would work?:chevy:

The kit just pictured would work.

rushingg149

08-16-2012 09:08 AM

Re: Serpentine belt conversions

Quote:

Originally Posted by tll74 (Post 5541525)

The kit just pictured would work.

:chevy:What is the cost for the kit and the shipping to 75428 zip code? Would you please list everthing that is included? Please include payment instructions.:chevy:

tll74

08-17-2012 01:01 AM

Re: Serpentine belt conversions

Quote:

Originally Posted by rushingg149 (Post 5541731)

:chevy:What is the cost for the kit and the shipping to 75428 zip code? Would you please list everthing that is included? Please include payment instructions.:chevy:

I'll pull it off and picture it and that will answer what is included. Also I will be able to get shipping cost. Thanks, Tom

tll74

08-18-2012 12:22 AM

Re: Serpentine belt conversions

3 Attachment(s)

Pics of the conversion after pulled off.
rushingg149 shipping is 80.26
dbstepside shipping is 85.36

dbstepside

08-20-2012 10:10 AM

Re: Serpentine belt conversions

thanks for the shipping quote but i'm gonna have to pass right now in process of trying to buy a 72 burb so out of funds right now. dennis

mr.wilson

08-28-2012 11:44 AM

Re: Serpentine belt conversions

Do you have any sbc complete kits left? If so are they detailed/natural and what is shipping to 19372?

tll74

08-30-2012 05:56 PM

Re: Serpentine belt conversions

Quote:

Originally Posted by mr.wilson (Post 5562056)

Do you have any sbc complete kits left? If so are they detailed/natural and what is shipping to 19372?

Yes I have some left. Shipping is 78.65. It would be cleaned only. 100.00 extra to disassemble and detail. Thanks, Tom

70K10Hunter

09-09-2012 02:26 AM

Re: Serpentine belt conversions

Do you have any complete SBC kits left? and shipping to 92065

tll74

09-09-2012 11:30 AM

Re: Serpentine belt conversions

Quote:

Originally Posted by 70K10Hunter (Post 5582668)

Do you have any complete SBC kits left? and shipping to 92065

Yes I do and shipping would be 60.00 to Cali. I can check in the morning for a exact price but 60.00 is going to be very close. Thanks, Tom

70K10Hunter

09-09-2012 01:23 PM

Re: Serpentine belt conversions

10-4 be waiting for total and payment info.

SunSoaked

09-09-2012 11:53 PM

Re: Serpentine belt conversions

Quote:

Originally Posted by 70K10Hunter (Post 5583212)

10-4 be waiting for total and payment info.

I was going to go this route before stumbling uopn my 91 setup ay a local junkyard. It's a good deal. I have mine on my motor but it wont actually run for awhile. I'll tell you in advance your going to need a new water neck because the angle of the one you have runs the upper radiator hose right into the serp belt.

Good luck :)

70K10Hunter

09-10-2012 01:23 AM

Re: Serpentine belt conversions

thanks do you have a part# or a source for the correct neck? or do I buy one for the late model setup?

70K10Hunter

09-10-2012 01:25 AM

Re: Serpentine belt conversions

Oh' I will be checking my local junkyard too, but these guys are expensive and I can't pull my own parts.

SunSoaked

09-10-2012 09:58 AM

Re: Serpentine belt conversions

Quote:

Originally Posted by 70K10Hunter (Post 5584519)

thanks do you have a part# or a source for the correct neck? or do I buy one for the late model setup?

I meant the neck angles the hose into the back of the alternator. I would assume the late model has the correct angle neck since its still a small block. I didn't even think of it at the time. I'll let you know what I find out. tll74 might know what the fix is?

tll74

09-10-2012 02:58 PM

Re: Serpentine belt conversions

Quote:

Originally Posted by 70K10Hunter (Post 5583212)

10-4 be waiting for total and payment info.

I can get you the water neck to match the serp set up, no extra charge. As mentioned you will need to buy a new water pump. Order one for a 95 C/K 1500 if you want it to have the provision for the return heater hose. If not order it for a 89 C/K 1500. The early pump will give a cleaner look as it doesn't have a port to plug. PM sent
Thanks, Tom

sduckworth13

10-22-2012 01:26 AM

Re: Serpentine belt conversions

I just bought a serpentine setup. I have a 1981 SBC with the dbl hump heads with the accessory bolt holes. What is the part number for the water pump I need?

Thanks,
Scott

sduckworth13

10-22-2012 01:36 AM

Re: Serpentine belt conversions

Tom, GATES Part # 43114 Water Pump (Standard); Cast Iron, Reverse Rotation, 2 Outlets, is this the one I need to use. This is the setup I have. part# 101187851 a/c bracket and part# 10118701 alternator bracket.

tll74

10-29-2012 07:29 PM

Re: Serpentine belt conversions

Quote:

Originally Posted by sduckworth13 (Post 5660914)

Sorry for the delay just got back from a 9 day elk hunting trip. Yes, the description sounds correct. Thanks, Tom

chevy6869

10-29-2012 11:27 PM

Re: Serpentine belt conversions

still have any available? how do you go about the dummy pully for the ac?

tll74

10-30-2012 01:27 AM

Re: Serpentine belt conversions

Quote:

Originally Posted by chevy6869 (Post 5675635)

still have any available? how do you go about the dummy pully for the ac?

Yes, I still have some available for both the BBC and SBC. The idler that takes place of the AC pump is a hard find used but is still available new. I can check on the price of the idler and see how it it would afect the cost if your wanting a conversion. Thanks, Tom

tll74

11-10-2012 01:03 PM

Re: Serpentine belt conversions

ttt...I have 2 sbc kits and 2 bbc kits

TobyArnot

11-28-2012 08:38 AM

Re: Serpentine belt conversions

Quote:

Originally Posted by TobyArnot (Post 5472376)

Hey Tom,

What water pump does this use and can I find it locally? How much wiring trouble to replace old ext. reg. alt? Thanks

.
Well Tom, Some months later, but I think I'm ready. I would like conv. for Small Block with A/C, P/S, Alt. complete, shipped to 29708 ? ? Do you include the late model water neck?
.
Hope I can stand shipping

dbcampbell3

11-28-2012 09:08 AM

Re: Serpentine belt conversions

I'm interest in a conversion for a small block if one is available.

dbcampbell3

11-28-2012 09:09 AM

Re: Serpentine belt conversions

PM sent

All times are GMT -4. The time now is 08:05 PM.

Page 3 of 13

Last »

Show 40 post(s) from this thread on one page