![]() |
Re: parting out 79 with v6 8' bed
Quote:
Thanks Cason |
Re: parting out 79 with v6 8' bed
Awesome Ill try to take some pics after work...Its all on the outside but ill def take pics for verification...
Thanks |
Re: parting out 79 with v6 8' bed
are the beds in good shape if i cant find a good bed im going to get a utilty bed
|
Re: parting out 79 with v6 8' bed
dieselmec1993 the one bed isnt bad the flloor is solid but the pass side has some rust starting over the wheel well I can get you some pics...
76k10 I will get you some pics and measurements jranger taking a pic of what you want would be the best and be sure to add any measurements if needed |
Re: parting out 79 with v6 8' bed
thats the plan!!! I can tell you its the lower parts on the front side and back side of the wheel well...Ill give u all the details when i take pics later
|
Re: parting out 79 with v6 8' bed
2 Attachment(s)
Evan there out
Attachment 906162 |
Re: parting out 79 with v6 8' bed
76k10 there is a pic of the fan above this and the shroud is 29.5" wide 20" high and 6" deep where the fan sits and the hole is 21" for the fan, the fan in the pic is a 4 blade and its almost 20" I think i might have some other fans but would have to check
|
Re: parting out 79 with v6 8' bed
Quote:
|
Re: parting out 79 with v6 8' bed
The vent windows look good! Payment is on its way.
Evan |
Re: parting out 79 with v6 8' bed
2 Attachment(s)
Driver side rear of wheel well is 7 inches wide by about 18" tall (Basically to the top of the wheel well)
Pasenger side rear of wheel well is 5 inces wide by about 9" tall Width measured from the wheel well towards the rear Height measured from the bottom including curve up |
Re: parting out 79 with v6 8' bed
76k10 that not the shroud thats for sale the other one is not broken that one is
jranger i will check it tomorrow |
Re: parting out 79 with v6 8' bed
dieselmec1993..the beds not bad but its not worth driving from IN to get it.
|
Re: parting out 79 with v6 8' bed
sounds good thanks
|
Re: parting out 79 with v6 8' bed
Jranger the bed thats on the truck doesnt have what you need and the other bed has a small bad spot like you got I could prob get the pass side for you but dont want to cut up the bed if i can sell the whole thing but if i dont sell it soon its going to the boneyard and I will cut you a panal
|
Re: parting out 79 with v6 8' bed
ok just let me know
Thanks |
Re: parting out 79 with v6 8' bed
Any offers on anything
|
Re: parting out 79 with v6 8' bed
Hi,
If you don't mind, I want this parts which can be taken off the window. http://farm6.staticflickr.com/5156/7...2510e307_z.jpg they look like this http://farm6.staticflickr.com/5156/7...2510e307_z.jpg |
Re: parting out 79 with v6 8' bed
Quote:
|
Re: parting out 79 with v6 8' bed
My dad runs to pa once a week he'd be bringing it home
Posted via Mobile Device |
Re: parting out 79 with v6 8' bed
owner 84 I cant be for sure but I dont think the lock is any good on the slider but I will check and if its good i will get you a pic of the other side unless you dont care about that
|
Re: parting out 79 with v6 8' bed
Quote:
Thank you, Nasser |
Re: parting out 79 with v6 8' bed
|
Re: parting out 79 with v6 8' bed
Got the vent windows today...thanks again. It'll be nice having one that's not broken on the driver's side.
Evan |
Re: parting out 79 with v6 8' bed
2 Attachment(s)
here some pics of the slider, the lock is broke and there is a screw that goes threw the inside to the outside
Attachment 909775 Attachment 909776 |
Re: parting out 79 with v6 8' bed
Evan I'm glad you like them and I hope you can you use the shop rags i used for packing......haha
Jranger the bezel is gone and the only part of the bed that is worth cutting is the front pass side |
All times are GMT -4. The time now is 07:37 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com