Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

http://i235.photobucket.com/albums/e...827_184857.jpg

Got a bunch of parts from Porterbuilt last week. Now I need to find some time to finish grinding rivets from the rear spring hangers so I can install these goodies :metal:
Posted via Mobile Device

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

nice stuff!

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

coming alone nice

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

Took advantage of the cool, rainy night to tackle some unsavory work that I've been avoiding on the blazer.
http://i235.photobucket.com/albums/e...60115312_n.jpg

Got all the old brackets/spring hangers/bump stops/etc cut off the frame, and started mocking up the rear suspension.
http://i235.photobucket.com/albums/e...907_231203.jpg

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

Looks good! Wish someone had a bolt-in solution back when I converted mine. What's the plan for upper spring mounts?
Posted via Mobile Device

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

I would feel bad rodding such an original truck too.
Oh wait that's what I am doing.
Strike that.
How fast was that pass on the vid?
I have a 4wd I am converting to 2wd too (not like yours by any stretch)
So I am also interested in the rear spring mounts. Or Bag?
4wd frame is more narrow in the rear right?

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

I am getting away from air-ride on this truck. I am going to be running coil-overs on all 4 corners. I'll show the rear coil-over mounts when I get to that point. Going for more of a handling aspect on this rig, rather than just being low.

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

Thanks to Bennett-G4L, I have some new shoes on the way for the project.
Coys 18/20 combo.

http://67-72chevytrucks.com/vboard/a...1&d=1347814714
http://67-72chevytrucks.com/vboard/a...1&d=1347814714

Here's a couple pics of them on his ride.
http://67-72chevytrucks.com/vboard/a...1&d=1347814714
http://67-72chevytrucks.com/vboard/a...1&d=1347814714

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

Just got caught up on your build, this blazer is going to be awesome. I love tue porterbuilt parts. I know you will love the wheels and thanks again.
Posted via Mobile Device

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

I don't feel bad anymore. I'd feel worse spending a bunch of coin on a truck that wasn't truly what I wanted. ;)

The vid was a 12.1 et pass if I remember correctly. I didn't get my fast pass on vid that night, which was an 11.95.

Regardless if you go spring, or bags, you will need to either buy or fab a spring mount on the outside of the framerails, since as you mentioned, the frame rails are narrower at that point on the 4x4 frames. I am not going with coils, or bags, so my setup will be different than most. The coilover setup will be similar to a 4-link, in the way that they're mounted.

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

Took some measurements, drilled some holes, and got the trailing arm crossmember bolted in today. Used some PVC pipe to mock up the rear suspension without actually having to have the rear axle in.

http://i235.photobucket.com/albums/e...ps888a84a9.jpg
http://i235.photobucket.com/albums/e...ps7c53b4f0.jpg

Also clamped the fuel tank up to the frame to check the fit. It's sumped with a -10 fitting.

http://i235.photobucket.com/albums/e...ps9285a6f7.jpg
http://i235.photobucket.com/albums/e...ps13ce1baa.jpg
http://i235.photobucket.com/albums/e...ps12126ebc.jpg

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

killer

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

Well the wheels showed up...and since I don't yet have a rolling Blazer chassis, I decided to throw them on my blue C-10 and see how they look. I'm real happy :)

http://i235.photobucket.com/albums/e...926_172119.jpg

http://i235.photobucket.com/albums/e...926_172217.jpg

http://i235.photobucket.com/albums/e...926_172041.jpg

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

I'm glad you like them, they look awesome on your truck. Enjoy.
Posted via Mobile Device

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

Not too shabby for a long bed :D
Posted via Mobile Device

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

Man I have been away from this section too long ! Subscribed :metal:
thanks for bring me back... Wasted

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

Called up Rob at NoLimit and ordered up their WideRide IFS setup for the front. Should be here by Friday...can't wait to have a rolling chassis again.

http://www.nolimitparts.com/WRIFS_h.jpg

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

i see why you sold me the LS1, very nice

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

Didn't get anything done on the truck(s) this week, but I did get to work on wiring the shop, and putting up some lights. Kinda important with the days getting shorter and all...

http://i235.photobucket.com/albums/e...002_235317.jpg

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

Haha, my wife just posted this to my facebook wall...at least she has a sense of humor about it...

My WideRide IFS showed up!

http://i235.photobucket.com/albums/e...2/packages.jpg

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

Nice. That was a fast delivery. Gonna be cool to see this one come together. You planning on running stock inner fenders?
Posted via Mobile Device

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

Yes, planning for stock inner fenders.

Pulled the main crossmember out of the box to take a peek. Gotta find some time to start measuring and drilling holes.

http://i235.photobucket.com/albums/e...005_160830.jpg

http://i235.photobucket.com/albums/e...5_160849_1.jpg

Also picked up a clean 68 Chevy front clip while up in WI this weekend.


http://i235.photobucket.com/albums/e...006_112202.jpg
Posted via Mobile Device

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

Hope to be rolling by the end of the week.

http://i235.photobucket.com/albums/e...007_211548.jpg

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

Got the crossmember up to the frame last night...after cleaning up the shop, it's all the further I got before the wife wanted me to come in for the night... :waah:

http://i235.photobucket.com/albums/e...009_210641.jpg

http://i235.photobucket.com/albums/e...009_210726.jpg

http://i235.photobucket.com/albums/e...009_210654.jpg


Also, while I was waiting for parts to show up, I built this patina'd die-cast blazer. Got it on my desk at work to keep me motivated :lol:

http://i235.photobucket.com/albums/e...010_082526.jpg

http://i235.photobucket.com/albums/e...010_082443.jpg

Re: Project Family Truckster: 2wd Conversion Turbo LSx Blazer Build
 

Since you are going coil overs and have plans for Big Hp are you doing anything more to the frame to increase its stiffness to get all you can out of those front and rear suspensions?

After drilling some holes in my frame(2wd conversion) I can tell they sure arent made out of the same material as later model GM trucks....

Nice build either way