Re: Chucks 72 Cheyenne Custom Camper
Ha Ha. I noticed today that I have an original door key and a newer ignition key. I also have a gas cap and toolbox key. So 4 keys for this truck lol. Too many. I'm going to order a set that has it all, door locks, ignition, glovebox, and I'll see if I can get a lock off of another toolbox door rekeyed like the new ones. We'll see how it works out.
The tailgate band and mirrors are on their way. Hopefully they'll be here soon. Still no paperwork (title) though. |
Re: Chucks 72 Cheyenne Custom Camper
2 Attachment(s)
I got my stainless mirrors from budnikguy and they look good. I painted the 90 degree pieces since they had some surface rust on them. I cleaned them w/ a brillo pad and cleaned w/lacquer thinner, painted them w/chrome paint.
I also got the tailgate band in from a member. I tightened up a couple letters, put silicone on the letters studs so the washers that hold them on won't vibrate off, cleaned it and straightened a little push up spot on the drivers side. Just like new now. |
Re: Chucks 72 Cheyenne Custom Camper
Hey alright!! Its good to see progress on both of your projects! Did you check out the new thread in the TN section?
|
Re: Chucks 72 Cheyenne Custom Camper
Great looking truck. Have you considered wet sanding and buffing the paint?? CC69rat's GMC is a great example of how you can save old paint. Might wanna look into that, saves a ton of money. Either way it's a beautiful truck. Also I have some drivers quality upper tailgate trim I'd send to you if you were interested
|
Re: Chucks 72 Cheyenne Custom Camper
Thanks guys. No I didn't Rus I'll check it out.
Andrew, I appreciate it. I have some tailgate upper trim. I just need to polish it and drill holes for the fasteners. I think i need to buy some new ones. someone sprayed primer on the lower part of this truck and the upper driver bed side so i don't know whats under that. I might try that later. I thought I had found a houndstooth seat cover for it but it turned out to be black and white. Its being cleaned by a friend and will be sold or traded to get another seat cover thats brown like the original one. |
Re: Chucks 72 Cheyenne Custom Camper
Just caught up tonight. Job well done. I like the wheels and caps - timeless. Keep up the good work.
Posted via Mobile Device |
Re: Chucks 72 Cheyenne Custom Camper
3 Attachment(s)
Thanks.
I got some stainless bolts,washers and lock nuts and I put the mirrors on tonight. |
Re: Chucks 72 Cheyenne Custom Camper
Not much room for error getting in and out of the garage!
|
Re: Chucks 72 Cheyenne Custom Camper
That is true. I remember it wasn't too bad with the white ones though. But I don't think I'll let my wife pull it in or out lol.
|
Re: Chucks 72 Cheyenne Custom Camper
Wheres the PVC pipe?? lol
|
Re: Chucks 72 Cheyenne Custom Camper
Haha.. its in the trash.
|
Re: Chucks 72 Cheyenne Custom Camper
Daaaang, A case of beer, some Meguiar's Super 80 and #9, Ooooowee, that thing'd be purdy! Neat ol truck.
|
Re: Chucks 72 Cheyenne Custom Camper
Thanks Low Elco.
I found a spare tire holder bracket from a square body today. |
Re: Chucks 72 Cheyenne Custom Camper
1 Attachment(s)
Spare tire holder.
|
Re: Chucks 72 Cheyenne Custom Camper
Has your paperwork showed up yet?
|
Re: Chucks 72 Cheyenne Custom Camper
4 Attachment(s)
I found a hitch at the junk yard. Its a class III Reese. I like the way it tucks under the rear bumper. Tried my hitch/ball. I think it'll work fine. Its not buttoned up yet just test fitted. I have to make two holes bigger for the right size bolts and I'm going to paint it while I have it down. Not bad for 31.00
|
Re: Chucks 72 Cheyenne Custom Camper
Wow Chuck good deal on the hitch!!
|
Re: Chucks 72 Cheyenne Custom Camper
Quote:
|
Re: Chucks 72 Cheyenne Custom Camper
Quote:
|
Re: Chucks 72 Cheyenne Custom Camper
Hitch looks great. Also nice upgrade on the mirrors, look a ton better then the PVC:lol:
|
Re: Chucks 72 Cheyenne Custom Camper
1 Attachment(s)
Yeah it sure does. Its funny sometimes what people do on these trucks.
I got the lock set in today. I'll be able to put my passenger door back together now. I've lubed up the window regulator and door hardware so they work smooth now. I'll work on it tomorrow evening. on the drivers door I still have to correct the 6x9 speaker cut out and put the speaker in, then I'll do the same treatment on the hardware. Still haven finished up the tailgate or hitch. I have 3 jobs going at once lol. |
Re: Chucks 72 Cheyenne Custom Camper
Quote:
|
Re: Chucks 72 Cheyenne Custom Camper
Someone cut it out but didn't cut it big enough for the speaker. And the speaker was mounted from inside the door. I'll cut the hole to the right size and replace it with a sony that I have. If your going to mess it up at least do it right huh?
|
Re: Chucks 72 Cheyenne Custom Camper
Quote:
|
Re: Chucks 72 Cheyenne Custom Camper
I always kind of hated to see a truck with the doors or dash cut for stereo stuff. On the other hand, if it wasn't just a hack job, you can have a decent system at a fraction of the cost oand headache of working around the limitations of one that is factory.
Posted via Mobile Device |
All times are GMT -4. The time now is 11:18 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com