The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 3 of 6 12 3 456
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)
-   -   NC Parting out a 62 c10 (https://67-72chevytrucks.com/vboard/showthread.php?t=585862)

ACK 08-22-2013 08:27 PM
Re: Parting out a 62 c10
 
Is the jack holder and the hooks for the spring that hold it in place available? Thanks.

jcramsey 08-22-2013 09:20 PM
Re: Parting out a 62 c10
 
Quote:
Originally Posted by ACK (Post 6234072)
Is the jack holder and the hooks for the spring that hold it in place available? Thanks.
Will find out and let you know. Thanks!
Posted via Mobile Device

jcramsey 08-26-2013 10:01 AM
Re: Parting out a 62 c10
 
Quote:
Originally Posted by ACK (Post 6234072)
Is the jack holder and the hooks for the spring that hold it in place available? Thanks.
Truck didnt have the jack holder, sorry.

jcramsey 08-26-2013 10:04 AM
Re: Parting out a 62 c10
 
Quote:
Originally Posted by riot936 (Post 6230801)
Are the door mirrors good? Not concerned with rust.
Posted via Mobile Device
Just sent you a PM riot.

BOXER957 08-26-2013 12:43 PM
Re: Parting out a 62 c10
 
Do you still have the rear fenders and or front inner fenders?

jcramsey 08-26-2013 01:00 PM
Re: Parting out a 62 c10
 
Quote:
Originally Posted by BOXER957 (Post 6239371)
Do you still have the rear fenders and or front inner fenders?
Still got them....fairly rusty if I recall.

BOXER957 08-26-2013 01:09 PM
Re: Parting out a 62 c10
 
any way of shooting me some pics.? surface rust I don't care about, any rot through is what I need pics of. If you want to snap some with your phone I can pm you my # thanks

chakah 08-26-2013 09:06 PM
Re: Parting out a 62 c10
 
Is the front bumper still available? If 62Barnfind passes I'm interested, thanks

jcramsey 08-27-2013 08:00 AM
Re: Parting out a 62 c10
 
Quote:
Originally Posted by chakah (Post 6240130)
Is the front bumper still available? If 62Barnfind passes I'm interested, thanks
Still got the front bumper. Will send you my brothers contact info.
Posted via Mobile Device

BOXER957 08-28-2013 10:48 AM
Re: Parting out a 62 c10
 
Quote:
Originally Posted by ACK (Post 6234072)
Is the jack holder and the hooks for the spring that hold it in place available? Thanks.
I have jack,hooks and spring if you're still looking

62 Barnfind 08-31-2013 03:15 AM
Re: Parting out a 62 c10
 
I'm still interested in the front bumper and I would like the frane horns if he will cut them off? How much for all of it?

jcramsey 08-31-2013 12:01 PM
Re: Parting out a 62 c10
 
Quote:
Originally Posted by 62 Barnfind (Post 6246648)
I'm still interested in the front bumper and I would like the frane horns if he will cut them off? How much for all of it?
He will definitely cut them off. I will PM you his info, he said to give him a call.

jcramsey 08-31-2013 09:12 PM
Re: Parting out a 62 c10
 
Think my brother stripped off the rest of the decent parts today before the body goes to the scrap yard. Got some heater delete plates, gas tank, cowl. Make an offer!

ACK 09-01-2013 09:24 AM
Re: Parting out a 62 c10
 
Quote:
Originally Posted by BOXER957 (Post 6242371)
I have jack,hooks and spring if you're still looking
BOXER957 - PM sent. Thanks!

riot936 09-01-2013 10:58 AM
Re: Parting out a 62 c10
 
He say what he wants for the cowl?
Posted via Mobile Device

jcramsey 09-01-2013 04:24 PM
Re: Parting out a 62 c10
 
Quote:
Originally Posted by riot936 (Post 6248221)
He say what he wants for the cowl?
Posted via Mobile Device
$20 + shipping

rawraw67 09-01-2013 08:05 PM
Re: Parting out a 62 c10
 
1 Attachment(s)
what about the lower radiator cradles? they are mounted on the frame

jcramsey 09-01-2013 09:29 PM
Re: Parting out a 62 c10
 
Ill ask him about the radiator cradles tomorrow

60ShortStepGMC 09-02-2013 11:54 PM
Re: Parting out a 62 c10
 
PM Sent.

60ShortStepGMC 09-03-2013 12:08 AM
Re: Parting out a 62 c10
 
Quote:
Originally Posted by 60ShortStepGMC (Post 6250892)
PM Sent.
Oops, broke forum policy.
PM'd regarding whether or not torsion bar washer and spacer might be available (ones near the adjusting bolt head).

jcramsey 09-03-2013 09:16 AM
Re: Parting out a 62 c10
 
Quote:
Originally Posted by rawraw67 (Post 6248905)
what about the lower radiator cradles? they are mounted on the frame
He does not have the lower radiator cradles, sorry.

jcramsey 09-03-2013 09:17 AM
Re: Parting out a 62 c10
 
Quote:
Originally Posted by 60ShortStepGMC (Post 6250910)
Oops, broke forum policy.
PM'd regarding whether or not torsion bar washer and spacer might be available (ones near the adjusting bolt head).
PM'ed you my brothers contact info. He still has a washer and spacer I believe.

DREAMER1 09-09-2013 12:48 AM
Re: Parting out a 62 c10
 
Did somebody get allot the dash and gauges after all?
Posted via Mobile Device

rdlackey 09-09-2013 05:37 AM
Re: Parting out a 62 c10
 
1 Attachment(s)
Looking for the ebrake chassis equalizer bar that mounts on transmission crossmember. See pic.
Posted via Mobile Device
Posted via Mobile Device

jcramsey 09-09-2013 08:40 AM
Re: Parting out a 62 c10
 
Quote:
Originally Posted by DREAMER1 (Post 6260291)
Did somebody get allot the dash and gauges after all?
Posted via Mobile Device
Still has the dash with ash tray, glovebox door and guages. Heater controls were sold and my brother is keeping the switches.

Pm'ing you his info.


All times are GMT -4. The time now is 01:41 PM.
Page 3 of 6 12 3 456
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com