Re: Dream '69
Looking good!!
|
Re: Dream '69
Looks like a good start. Like the look of the 4x4 SWB. Any more progress?
Dwight |
Re: Dream '69
Haven't worked on it much this summer, just too hot out in the shop. I have been getting all the fittings together for my fuel lines, and I have my tank permanently mounted up now. Next step is getting the bumper on and fabbing up the fuel filler behind the plate. Need to start working on it more but its huntin' season now.
|
Re: Dream '69
Truck cab is going to paint in just a few days, I will post some pics soon. Work is continuing on the chassis, but its all small detail stuff that doesn't really show up good in a picture. Plumbing the underbed tank and the rest of the fuel system. Will be starting on installing the Heartthrob exhaust soon. That should be interesting.
|
Re: Dream '69
5 Attachment(s)
The Old Air compressor on along with the alternator using the supplied brackets.
Attachment 1442097 Falcon tank installed. Attachment 1442099 Attachment 1442100 Attachment 1442101 |
Re: Dream '69
3 Attachment(s)
My Carter elec. fuel pump
Attachment 1442107 These are to show how tight the tank fits to the leaf spring hangers. If you have a shortbed with leaf springs this is a good under bed tank install. Attachment 1442108 Attachment 1442109 |
Re: Dream '69
1 Attachment(s)
This shows how the tank looks from the back. Camera is about the same height as the bumper.
Attachment 1442124 |
Re: Dream '69
2 Attachment(s)
I have an issue with the exhaust on the passenger side. I am going to have to take the intermediate pipe down the exhaust shop and have a joggle put into it get up and over the T-case cross member.
Attachment 1442126 Attachment 1442127 |
Re: Dream '69
5 Attachment(s)
New rockers
Attachment 1448168 New cab corner Attachment 1448169 Headed to the paint shop Attachment 1448170 In the paint booth Attachment 1448171 It's Red! Attachment 1448172 |
Re: Dream '69
looks great! Nice work.
|
Re: Dream '69
2 Attachment(s)
Here's the bottom. It is tinted bedliner.
Attachment 1448468 cab corner speaker mounting plates installed. http://67-72chevytrucks.com/vboard/s...6&goto=newpost Attachment 1448469 |
Re: Dream '69
2 Attachment(s)
Attachment 1462296
Attachment 1462297 Got the cab back on the frame today and installed the core support, radiator and shroud. Ordered a flexible stainless radiator hose kit and once I get that installed I can run the engine. |
Re: Dream '69
looks great!
|
Re: Dream '69
Digging the red. Cab and frame look awesome together.
|
Re: Dream '69
Wow looking good like the red and 4x4.. awesome truck..
|
Re: Dream '69
Sweet build stay on it !!!
|
Re: Dream '69
5 Attachment(s)
Cooling system and belts are done as well as the a/c unit. Working on wiring now.
Attachment 1491681 Attachment 1491682 Attachment 1491683 Attachment 1491684 Attachment 1491685 |
Re: Dream '69
4 Attachment(s)
Started cutting the dash for the ac vents. As you can see, I failed to do this before the cab was painted, so I have been dreading this step. I used the template that was supplied with the Old Aire kit and marked the cut out. I then drilled all around the perimeter with a 1/2 inch drill bit. Then I used a nibbling tool to remove the remaining metal right up to the mark. Finally, I smoothed the edge with a file.
Attachment 1492507 Attachment 1492508 Attachment 1492509 Attachment 1492512 |
Re: Dream '69
5 Attachment(s)
Vintage Vibes USA 630 II installed, now just stringing wires. Will be cutting the holes for the speakers soon.
Attachment 1502085 Attachment 1502086 Attachment 1502087 Attachment 1502088 Attachment 1502089 |
Re: Dream '69
Can I ask what AC unit you went with? and why? I am debating on vintage air or old air.
build looks good! |
Re: Dream '69
Quote:
|
Re: Dream '69
Looking good. Thanks for the info as i felt the same way. I ordered my old air kit and started to mock up the mounting plates on the inside without the outside black plate.
|
Re: Dream '69
Nice build
While your under the dash with the ac install you might want to consider adding a ac override switch to turn the compressor on with the heat function. I find the kit in our suburban is not able to defog the inside with out the ac on and in fall spring temperature I need heat not ac ! |
Re: Dream '69
Quick question.
If you set to defrost with and the temp control to warm or hot air the compressor does not come on?? |
Re: Dream '69
Quote:
|
All times are GMT -4. The time now is 02:20 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com