Re: Trailing Arm Mounts
I will be on vacation from 08-08-16 thru 08-25-16. If you wish to make a purchase you can post here in this for sale thread, send me a PM or an email to captainfab454@hotmail.com. I will reply to your inquiry when I return on the 25th. I do currently have a list of orders to build and ship when I return but I will add your name to the list in order of when received. Thanks for your understanding.
|
Re: Trailing Arm Mounts
I now stock trailing arm mounts for the 3.250" axle tubes found on some Ford 9" differentials.
|
Re: Trailing Arm Mounts
I'll take a set of these trailing arm mounts for a 14 bolt. Please watch for a paypal payment of $68.60. Thanks
|
Re: Trailing Arm Mounts
Payment received and PM replied to. Thanks for the purchase :)
Quote:
|
Re: Trailing Arm Mounts
intrested in 10 bolt trailing arm mounts .. thank you
|
Re: Trailing Arm Mounts
I replied to your PM.
Quote:
|
Re: Trailing Arm Mounts
1 Attachment(s)
I have the u-bolts back in stock again.
|
Re: Trailing Arm Mounts
I am officially notifying everyone that I will be on vacation from 02-05-18 thru 02-13-18. I will do my best to get all orders built and shipped before I leave, if placed by 01-31-18. Orders placed while I am gone will be built and shipped in order of receipt of payment once I return. Thanks for understanding.
|
Re: Trailing Arm Mounts
PayPal sent for a set of brackets. Thanks again
|
Re: Trailing Arm Mounts
Payment received, Thanks :)
|
Re: Trailing Arm Mounts
Sent you a pm. I also need a set of bolts in addition to the coil pads please. Thanks brother!
|
Re: Trailing Arm Mounts
I replied to your PM.
Quote:
|
Re: Trailing Arm Mounts
Here is one of the threads here on the forum that shows in detail how to weld on trailing arm mounts at the correct angle on a leaf spring differential.
http://www.67-72chevytrucks.com/vboa...d.php?t=624445 |
Re: Trailing Arm Mounts
Do you make anything to adapt the trailing arm u-bolt holes/mounts on the C20
with an HO 52 when swapping in a 12 bolt with a smaller axle tube? |
Re: Trailing Arm Mounts
The spacing of the U-bolt holes thru the trailing arms are the same whether they are under a C10 or a C20. So absolutely nothing special required. If you need a set of trailing arm mounts for a 12 bolt, I have those.
|
Re: Trailing Arm Mounts
Maybe I'm not seeing something clearly but the axle tube on the HO52 is bigger than the axle tube on the 12 bolt. Accordingly the U-bolts and corresponding trailing arm holes are wider than the 12 bolt axle tube. Right?
|
Re: Trailing Arm Mounts
I suppose it's not critical if the U-bolts and holes are wider if the mount cutout is the correct circumference for the 12 bolt. Is that how you see it?
|
Re: Trailing Arm Mounts
Do you make panhard bar mounts as well?
|
Re: Trailing Arm Mounts
As I said above.....the trailing arm holes for the u-bolts are the same spacing whether they are for a C10 or a C20.....no difference. I have made and sold a lot of trailing arm mounts and they all have the same u-bolt hole spacing.
No I do not yet make a panhard bar mount. I have been trying but working 80 hrs/7 days a week every week every month doesn't leave much time to develop new products. Quote:
Quote:
Quote:
|
Re: Trailing Arm Mounts
Due to an increase in the cost of having my parts laser cut, I have been forced to raise my prices. I'm not making any more money, just trying to stay in business with these increases in my costs. Thanks for understanding.
|
Re: Trailing Arm Mounts
on a h052 Swap to 14 ff 72 c20 rear coil truck will the truck arms need the hole moved for a wider axle tube fit ?
|
Re: Trailing Arm Mounts
No the holes remain exactly the same as original. With the 14 bolt, there needs to be a slight groove put into the axle tubes on both sides so that the u-bolts will pass by and line up with the holes. This groove does not need to be more than probably 3/4" long. The 14 bolt axle tubes are 3/8" thick, so this does not present an issue.
I do now offer a panhard bar mount for the 14 bolt. Quote:
|
Re: Trailing Arm Mounts
Hi I’m in need of a set of perches for an HO52/72 axle. If you can give me a lead time and an email for payment, I’d like to get a set on the way
|
Re: Trailing Arm Mounts
PM sent.
Quote:
|
Re: Trailing Arm Mounts
Here is a link to my new website and online store where you can see and purchase all of the products that I fabricate for the '60-'72 GM trucks.
https://customfab-cda.com |
All times are GMT -4. The time now is 09:09 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com