Re: 1977 K10 Silverado Longbox
 

Greenlee, the tires are 31/10.50/15 pictured. I now wish I would have gone with the 32's. I wanted the tall skinny look but I'm convinced that's not possible with the 15x8 rallies. I would need to get into a 16 inch wheel to achieve it and my theme here is to keep Ol' Blueberry stock/restore.

I have since picked a used one and buffed it out. The one pictured is the old, ill post the new tomorrow. I actually went through the cluster and installed a new wiring circuit and leds. I just didnt document very well so I never posted on it.. But yeah it was plum ruined! Thanks for the offer kind sir!

Attachment 1323880

Attachment 1323881

Attachment 1323882

Re: 1977 K10 Silverado Longbox
 

I was just looking on 4 Wheel Parts website and you can get those tires in a 33x10.50. That might help with the tall skinny look. I have 31's on my truck also and would like to go with something a little bigger.

Those printed circuits are a pain. The laminate on mine was coming a part in one area. I just tried to be careful with it when putting the cluster back in. So far everything still works.

Re: 1977 K10 Silverado Longbox
 

I think if I went with the 33/10.50 I would have to get into a small lift.. No sure that's what I want to do as of now. But your right, that would get it taller!

Here's a pic of the LEDs. Not a great pic but they do help light it up. Not able to dim is the downside.

Attachment 1324156

Re: 1977 K10 Silverado Longbox
 

That looks great! :metal: The bezel looks good too. I did the LED's also. What a difference it makes!

I'm with you on keeping it mostly stock with no lift. I have read here on the forum that 33's will fit using the stock wheels without a lift. However, I'm thinking they might rub offroad? Most 33's are 12.50 on the width. You can get the BFG's in 33x10.50 so they might have a better chance of fitting with no rubbing.

Your truck remind me of a 76' 2wd long bed I had. It was the same 2 tone colors as yours, but repainted solid blue just like yours.

Re: 1977 K10 Silverado Longbox
 

Anything done to this beauty lately?

Re: 1977 K10 Silverado Longbox
 

Looking good. I recognize your inspiration truck. I'm pretty sure I know where it is. Cool truck. I've looked at it several times while passing by. Clean looking for sure.

Re: 1977 K10 Silverado Longbox
 

Did a few things this weekend. I needed to get to the gas tank to replace restore. That's next on the list. Prob go ahead and redo all lines while the beds off.

Attachment 1339046

Attachment 1339047

Attachment 1339052

Attachment 1339054

Attachment 1339055

Re: 1977 K10 Silverado Longbox
 

Attachment 1339056

Attachment 1339057

Attachment 1339058

Attachment 1339059

Attachment 1339060

Re: 1977 K10 Silverado Longbox
 

How hard was it to replace the pins and bushings? That's something I get to look forward to on my '76.

Re: 1977 K10 Silverado Longbox
 

Rusty76... It was a breeze. Took about 20 -30 mins. I used a jack with a 2 ft piece of railroad tie to support the door. Penetrating oil, a socket and wrench. Hammer to knock the pin up and out. Screwdriver to knock out one of the stubborn bushings. When tapping back in the new bushings, do it gingerly cause they break. Good luck with it!

Re: 1977 K10 Silverado Longbox
 

Thanks. It's coming all in due time. I've got a ways but still I like to do my homework.. Thanks.

Re: 1977 K10 Silverado Longbox
 

Ok so while I have the bed off, a few things need to be addressed. Dropped the tank to fix the original problem. Gas was leaking out every time I filled up. Filler hoses were rotten. I order a new sending unit lock rig and gasket. Also ordered strap pads and paint for the tank once I get it clean up and sanded. It looks spotless inside, and it's original with USS stamp. I plan on powder coating the straps along with new hardware. I also ordered a can of Chassis Saver in the vintage flat black. Time to get to work!
Attachment 1342299

Attachment 1342300

Attachment 1342301

Attachment 1342305

Attachment 1342306

Re: 1977 K10 Silverado Longbox
 

Attachment 1342309

Attachment 1342310

Attachment 1342311

Attachment 1342312

Attachment 1342313

Re: 1977 K10 Silverado Longbox
 

Wheel and tire combo is stunning! Lookin good.

Re: 1977 K10 Silverado Longbox
 

You're digging in. Going in deep now!

Re: 1977 K10 Silverado Longbox
 

I just want it right because I don't plan on selling! Check out that crazy hitch someone welded to the frame and cut that huge hole in the crossmember to run it through... That ****s coming OFF!

Re: 1977 K10 Silverado Longbox
 

looks awesome!!:metal:

Re: 1977 K10 Silverado Longbox
 

Been super cold to get a lot done.. Blasted tank and straps and primed. Gonna try Chassis Saver Black on the straps and Silver on the tank. New hoses and fuel pump arrived. Also found a rust free filler neck at the yard and wire wheeled it clean! Ill Chassis Save it as well.

Attachment 1346790

Attachment 1346791

Attachment 1346792

Attachment 1346793

Re: 1977 K10 Silverado Longbox
 

I enjoy your updates. Your doing a great job!! Love the truck.

Re: 1977 K10 Silverado Longbox
 

Nice work! looks like this will be a nice functioning rig!

Re: 1977 K10 Silverado Longbox
 

Looking good dude!

Re: 1977 K10 Silverado Longbox
 

I too enjoy following along even if i dont post up much.

Re: 1977 K10 Silverado Longbox
 

Thanks guys!!! I'll try and get some pics up later this week. I've been in the bed with the flu for a week..

Re: 1977 K10 Silverado Longbox
 

Looks great man! Definitely is giving me motivation to work on mine. SUBSCRIBED

Re: 1977 K10 Silverado Longbox
 

Get better soon. The flu is never fun.