Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

I should have several sets. I will take another couple sets out on Monday . Mike has first choice. Thanks

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

hi do you have am radio and hardware nice face thanks

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

I do in the truck pictured but not sure of condition . Usually by now the faces show same wear and may or may not work.

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

alright' keep us updated thanks

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

Yes please. I will PM you my address and send payment when you can get the total with shipping/

Thanks

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

Hello. Looking for door window clear . drivers side if that makes difference.
34698. Tampa area.
If you have one. Thanks.
Paul.

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

Here are some pics of one of the radios I have that is still in the truck . Thanks

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

Removed a couple sets of vent windows . Here are some pics. Notice I have them as set 1 and set 2 in photo.
Set 1 . Will have to have rubber seals around vent frame replaced. Also the fuzzy in the channel run. Vent handles have light pitting . Light scratches on the glass. Mounting screws present.

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

Set 2 . Rubber seals will need to be replaced . Also the fuzzy channel . Some wear on one of the stainless strikers . Handles have some pitting but work fine. Light scratches on the glass. Again selling these as good sets but will need to be restore.

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

Paul , I do have a door window but shipping glass is a difficult to say the least. I had to resort to building wood crates which became very expensive. I still ship vent windows as I can pack them safely but sheet glass is a challenge and usually ends up broken if not in a wooden crate. Thanks

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

hi paul,how much for that radio or better and all hardware rear bracket wire plug speaker shell screws.shiped to 30141 thanks butch

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

Thanks for the pics Paul. I am still interested. PM me the total with shipping for Set 1 and I will send payment. Mike

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

Will pm with shipping quote in the next hour or so. Thanks

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

Can you pm me for set 2 price shipped to 95403 thanks

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

Pm sent with shipping and paypal info. Thanks

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

Shipping quote sent via pm. Thanks

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

Thanks Paul. Payment sent.

Mike

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

Hi Butch

Here is a radio that I already had out Someone has spliced the speaker wire. Missing one knob and the dog leg wingnut screw and appears someone has reconed the speaker themselves . Has a pretty clean housing but have not taken the cover off. Price on this one would be $125 shipped. Prices vary according to condition. If I have time to test and they play price goes up quite a bit.

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

More Pics

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

Set 1 vent windows sold . Shipped USPS Priority Mail. Tracking # in pm. Thanks again.

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

is the engine wiring harness available still?

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

I'll take the front bumper brackets. Do you have a set of rear bumper brackets (fleetside sport bumper)?

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

No , sorry the wiring harness was all hacked up. We didnt save it. Thanks

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

Ok the front bumper brackets are yours . I will get them off tomorrow. I do not have any rear bumper brackets right now. I will get them boxed up. Can you send you zip for a shipping quote. Thanks

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 

seat belts by any chance?