![]() |
Re: slik ricks 67 short wide custom/10
I finally found your thread, right on! Any new progress? Good seeing you out at sonic!
|
Re: slik ricks 67 short wide custom/10
Quote:
|
Re: slik ricks 67 short wide custom/10
well gut i kinda held out on ya little bit i wasnt on awhile ago cause we switched our internet so it was off for a day or two and im too youyng to go into pick n pull you have to be 16:waah:there is a cst 67 (i didnt believe him when he told me until he showed me a pic) but it has a 68 bed, so i told my dad what i needed and he went down there and about 2 1/2 hours and about 40 bucks i got this:
two parking light housings w/ pig tails (the wiring) the brace that goes on the inner driverside fender 67 mirror and arm (bracket)since they are hard to find trim for the frnt door trim drivers side cab trim passenger side wheel welll bed trim the glove box door the h for chevrolet on the hood a bunch of the plugs that go on the doors door jamb and thats it |
Re: slik ricks 67 short wide custom/10
^^yall didn't buy me anything?;) nice work
|
Re: slik ricks 67 short wide custom/10
Quote:
|
Re: slik ricks 67 short wide custom/10
well im am going to be trading my bed sides (68) for a 67 will be getting tommorow my 67 dog dish chrome and red and hopefully my window rubbers come in tommorrow
|
Re: slik ricks 67 short wide custom/10
well i no i have been laging on the pics but i will get some i got my window rubbers in the mail today got the back window in and now we need the front but that is going to be a pain so we are going to have some one come out and do it but i also got those hubcaps they are pretty good i would say
|
Re: slik ricks 67 short wide custom/10
:wop:
;) |
Re: slik ricks 67 short wide custom/10
well see if i cant get you some pics then va72c10 well this is the bed i will be trading for my 68 bedsideshttp://67-72chevytrucks.com/vboard/p...pictureid=9732 andhttp://67-72chevytrucks.com/vboard/p...pictureid=9731and anotherhttp://67-72chevytrucks.com/vboard/p...pictureid=9735
|
Re: slik ricks 67 short wide custom/10
here is the engine a little better and my door trim repainted blackhttp://67-72chevytrucks.com/vboard/p...pictureid=9734 andhttp://67-72chevytrucks.com/vboard/p...pictureid=9733
|
Re: slik ricks 67 short wide custom/10
looks like a pretty nice bed and that door trim looks great!
|
Re: slik ricks 67 short wide custom/10
thanks my dad got the trim and i cleaned it
|
Re: slik ricks 67 short wide custom/10
well looks like you are makeing some great progress just keep up the good work i know they take a lot of time and hard work but they are worth it in the long run :chevy::chevy::chevy:
|
Re: slik ricks 67 short wide custom/10
ya i know well hopefully i can get the front window in inbody have any advce
we cant even get the rubber on the window inorder to put it on the cab |
Re: slik ricks 67 short wide custom/10
What brand seal? Are you using silicone or window spray to make the gasket easier to slide on the windshield? Then put rope in the back, install from the front, and pull the rope out as you pull in and it'll seat itself....sounds easy, huh ;)
|
Re: slik ricks 67 short wide custom/10
Quote:
|
Re: slik ricks 67 short wide custom/10
I used a fat speaker wire when I helped a friend do it, we also used a heat gun to help soften it up and a suction cup to help move it around. Here's a youtube link that makes it look so easy :metal:
|
Re: slik ricks 67 short wide custom/10
thanks man;)
|
Re: slik ricks 67 short wide custom/10
So did you get the windshield in ? :metal: If not, hurry its supposed to rain on Sunday.
|
Re: slik ricks 67 short wide custom/10
Quote:
|
Re: slik ricks 67 short wide custom/10
well here is some pictures of the parking lights and other stuffhttp://67-72chevytrucks.com/vboard/p...pictureid=9786and i thought these were cool im going to post these and more into the thread ''unique to a 67''http://67-72chevytrucks.com/vboard/p...pictureid=9787 http://67-72chevytrucks.com/vboard/p...pictureid=9788
|
Re: slik ricks 67 short wide custom/10
cool
|
Re: slik ricks 67 short wide custom/10
well glad you like them
|
Re: slik ricks 67 short wide custom/10
well todays plan has already been set in motion so here goes i took the bed off peice by peice so i can trade the bed sides on tuesday and plus my cross sills and headgate are still in primer so i think i am going to paint them but for some reason the black paint i have (its new) it looks like crap but i did everything correct so thats kinda :crazy::crazy:
|
Re: slik ricks 67 short wide custom/10
i dont know if any of you have ever seen the terrets guy vidoes on you tube, but i feel like him, (ah sh#&!!!!!):lol: this stupid paint. i shook the crap out of the can ,i put acetone, (but not too much) i cleaned the paint gun really good, (it spilled on the floor, which we wiil be moving out by the 8th so thats not good) now i need to go wire wheel the cement so its gone. i spilled on my self and all i managed to do, is try and get the paint to come out right AND STRAIGHT, so i sprayed it on some inner fenderwells. it looks like i undercoated them:lol: but still this is the second timeit has done this to me, i am about ready to throw it in the garbage:sumo::waah::banghead::dohh::m6::m7::mad:, and buy another type of paint but my dad paid 50 bucks for it, so before i do anything else, i am going to study the crap out of this paint. anyways im not dicoureged .just seeing my truck sit there still makes me happy so i will look for something else to do and hopefully it will go right oh and SORRY FOR THE LONG POST .....
|
Re: slik ricks 67 short wide custom/10
aren't problems wonderful?:mm::lol:
|
Re: slik ricks 67 short wide custom/10
Quote:
|
Re: slik ricks 67 short wide custom/10
If you have a pressure washer, that should get rid of the paint on the cement. Hey just figure it as a learning experience :metal:
I bet it wont happen again right ? :lol: |
Re: slik ricks 67 short wide custom/10
Quote:
|
Re: slik ricks 67 short wide custom/10
well iw ent and bought some matte black for the air cleaner probably going to get it tomorrow and then i got some silver for the glove box door its black and i repainted the silver on the edge all i need to do is get the emblem and its finished how do those go on what type of clips and do they come with the emblem
|
Re: slik ricks 67 short wide custom/10
Quote:
|
Re: slik ricks 67 short wide custom/10
well ot the air cleaner and painted it came out nice and it mounted a little rough but then i got a spacer and it worked b-e-a-utiful!!! it even still has the ''keep your car all gm'' sticker on it i didnt paint over i left that alone looks sweet
|
Re: slik ricks 67 short wide custom/10
ahem... :wop:
|
Re: slik ricks 67 short wide custom/10
Quote:
x2! |
Re: slik ricks 67 short wide custom/10
....
|
Re: slik ricks 67 short wide custom/10
x3
|
Re: slik ricks 67 short wide custom/10
Quote:
|
Re: slik ricks 67 short wide custom/10
Looking good, keep us posted!!
|
Re: slik ricks 67 short wide custom/10
Quote:
|
Re: slik ricks 67 short wide custom/10
Quote:
|
All times are GMT -4. The time now is 08:11 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com