Re: CPP Drop Spindle Special
 

p/m sent

Justin

Re: CPP Drop Spindle Special
 

Hey Justin,

So just as nds1968 said, I'm also planning on going with the Wilwood 14" d52 BBK(except with Red Calipers).

Could you send me a quote on this set up, including the correct CPP Spindle I would need?

I may do the spindles first then add the Wilwoods later.

Thanks!

Re: CPP Drop Spindle Special
 

Oops. Forgot to give you the info on my truck:

1968 CST (currently running ECE 5 bolt disc conversion kit)

Thanks!

Glenn

Re: CPP Drop Spindle Special
 

p/m sent

Justin

Re: CPP Drop Spindle Special
 

Hey Justin,

will these spindles work with a big baer brake upgrade? I'm needing to bring my wheels in a bit but don't want to buy a narrower tire.

Dan

Re: CPP Drop Spindle Special
 

Dan you will have to go with the cpp modular drop spindal and Bear brakes does have a caliper bracket they make that will bolt to the cpp modular spindal.Now check your p/m box for the price
Thanks,
Justin

Re: CPP Drop Spindle Special
 

pm sent for quote

Re: CPP Drop Spindle Special
 

P/m sent

Justin

Re: CPP Drop Spindle Special
 

I have a 68 gmc suburban, Will it work with stock steel 15 inch rims? I would like a price for a set of these spindles with 6 lug roters and calipers complete kit and also a price for the same set up with modular spindles , How much narrower will I gain with the modular ones? And I need a price on a master cyl and booster as I currently have drums, Please let me know as I am price shopping, thanks

Re: CPP Drop Spindle Special
 

p/m sent

Justin

Re: CPP Drop Spindle Special
 

Hi, Can you send me a PM with pricing for 1972 C10 modular spindles with brackets to run the stock calibers? Shipping to 97045.

Re: CPP Drop Spindle Special
 

p/m sent

Justin

Re: CPP Drop Spindle Special
 

ttt

We have spindals instock and springs and more parts in stock from Cpp.Let us know if you need something

Justin

Re: CPP Drop Spindle Special
 

Will be ready for these real soon.

Re: CPP Drop Spindle Special
 

Sounds good let me know when you are ready and we will take care of you for sure.

Justin

Re: CPP Drop Spindle Special
 

How much for a set of these spindles and the six lug rotor and caliper setup be? Basically a front disc conversion for my 68 1/2 ton with stock ball joints.

Re: CPP Drop Spindle Special
 

P/M sent


Justin

Re: CPP Drop Spindle Special
 

how much for the modular spindles and a disc brake conversion for a 69 suburban?
Posted via Mobile Device

Re: CPP Drop Spindle Special
 

P/m sent with all your options

Justin

Re: CPP Drop Spindle Special
 

quick question...so what is the difference in size between the ball joints of the 63-70, 71-72, 73-87?

Re: CPP Drop Spindle Special
 

The difference in the BJ on the

63-70 taper being the smallest

71-72 taper is bigger than the 63-70

73-70 taper being the biggest out of all of them

Justin

The tapers are different

Re: CPP Drop Spindle Special
 

I know that but what do each one measure to know which spindles they are when you run into some.
Posted via Mobile Device

Re: CPP Drop Spindle Special
 

Reason I ask is because I have two sets of drop spindles but don't know what they fit. I was hoping maybe by determining the size of the bj I could figure that out. I know the bottom taper hole is 7/8" and then it tapers.
Posted via Mobile Device

Re: CPP Drop Spindle Special
 

We dont measure spindles like that here, we have fit parts that we measure these spindles with. If you want to determine what spindles you have i will give you all the parts numbers as followed to run down to your parts store and determine what you have. Keep in mind its not just the ball joints but the outter tie rod tapers are different also

1963-70 upper balljoint fa480 lower fa481 outer tierod es350-L
1971-72 upper balljoint fa683 lower fa1014 outer tierod es415-r
1973-88 uper balljoint fa903 lower fa1014 outer tierod es409r

Hope this helps, there is no easy way to measure these, fit parts will give you the answer. Thanks

Re: CPP Drop Spindle Special
 

We have cpp parts in stock and great prices and fast shipping.All the three that matter!!!!!!

Re: CPP Drop Spindle Special
 

Is it possible to run a wider wheel with these spindals?

Re: CPP Drop Spindle Special
 

I have a 63 with a raised crossmember and DJM drop spindles SSBC 1.25" brakes for a 73-87. Will the CPP spindles bring the wheels in more for some extra fender clearance? Are they 2.5" drop?

Re: CPP Drop Spindle Special
 

Justin,
I sent you a PM a few days ago for some pricing on spindals and springs and shipping to 31763.


Coater

Re: CPP Drop Spindle Special
 

I sent you a p/m earlier I am sorry on the delay here.We just got back from a Hotrod show this pass weekend.I was away from the computer for a few days.

Justin

Re: CPP Drop Spindle Special
 

More Cpp parts are coming in for stock give us call to save some $$$$

(805)485-0382

Justin

Re: CPP Drop Spindle Special
 

YES! This is the biggest perk of this spindle as no other spindle in the country moves the wheels inboard 3/4" of an inch per side.....:metal:

Re: CPP Drop Spindle Special
 

You can as it moves the wheels in 3/4" of an inch per side against the factory drum brakes.

Re: CPP Drop Spindle Special
 

This also add here that all of Cpp dropped spindals they make for these trucks will move the wheel in 3/4 per side.

Re: CPP Drop Spindle Special
 

Is this deal still available?
Posted via Mobile Device

Re: CPP Drop Spindle Special
 

The sale is still going on for sure.

Justin

Re: CPP Drop Spindle Special
 

Cool. Now I just have to measure and see if my truck would still lay out with a 2.5" spindle instead of the 3" I'm using now.

Re: CPP Drop Spindle Special
 

Just ordered a set! Can't wait to get them in!!:metal:

Re: CPP Drop Spindle Special
 

Packed and shipped today to you thanks for the order

Justin

Re: CPP Drop Spindle Special
 

Looks like my truck should still lay frame with these spindles so I think I'm gonna pull the trigger and call tomorrow to order a pair.

Re: CPP Drop Spindle Special
 

Sounds good we will take care of you for sure

Justin