Re: Project: "Yenko C5 Blazer"
|
Re: Project: "Yenko C5 Blazer"
PA folks do it right :D
What they said above. He was a dealer in southwestern Pennsylvania who put together some wild combination muscle cars. He did an LS7 454 rebuild for me on an engine i used in my 58 Chevy. |
Re: Project: "Yenko C5 Blazer"
Thanks, an interesting read, we've had a few similar guys/companies here over the years, most seemed to end up getting screwed over by the manufacturers when they realised that there was a market for that kind of car and started to make them officially.
|
Re: Project: "Yenko C5 Blazer"
Quote:
Here is the linky from basically the beginning to current. "What a difference a Year makes" :wave: |
Re: Project: "Yenko C5 Blazer"
Quote:
|
Re: Project: "Yenko C5 Blazer"
Some new pic's in the Siggy Linky towards the end. :D
She will be making her maiden voyage in June! :ito: http://i831.photobucket.com/albums/z...5/YFTSB087.jpg |
Re: Project: "Yenko C5 Blazer"
Wow that is lookin mean!!! Nice work:chevy:
|
Re: Project: "Yenko C5 Blazer"
I don't get tired of seeing that pic :chevy:
|
Re: Project: "Yenko C5 Blazer"
Sweeet!
|
Re: Project: "Yenko C5 Blazer"
Been 4 months since my last update, still chasing down issues like
wiring, cables, leaks, etc ..... Only thing new is that I pre-ordered one of those Smoothie front bumpers through Tim at Top Banana. (This summer was so stinking hot that I just didn't get much done) EDIT: Still no maiden voyage, maybe by end of October? :( |
Re: Project: "Yenko C5 Blazer"
Great job Craig!
Were you able to run it in June as hoped? |
Re: Project: "Yenko C5 Blazer"
*cough* Slacker *cough* Hurry up and post pics of all the dust that has built up on this thing, Craig!!!
|
Re: Project: "Yenko C5 Blazer"
Still on jack stands, don't even know where to begin,
almost traded her off last month but I backed out at the very last minute, maybe this Spring it will move? (I tried to save $ in 3 areas, all 3 bit me in the arse) |
Re: Project: "Yenko C5 Blazer"
Quote:
|
Re: Project: "Yenko C5 Blazer"
A little bit of Progress and a Name Change. I gave up on
the "Yenko C5 Blazer" and renamed it to "SQ VET" which stands for "Square Corvette". (A lot of stuff on it is Vet related and I changed my mind on the Exterior color to.) *If a Mod could change my thread title I'd appreciate it. Warning ~ These are Crummy arse Cell video's of My ride. http://i831.photobucket.com/albums/z...h_IMG_0845.jpg http://i831.photobucket.com/albums/z...h_IMG_0846.jpg :waah: |
Re: Project: "Square Corvette"
Glad to see someone getting somewhere on a project. Both of mine are sitting. Hope I'll get to see it at CTC Luv.
Oh yeah, change your thread name for ya. |
Re: Project: "Square Corvette"
Aweful lot of noise for the speed youre traveling...:metal: ;)
Sounds freakin' awesome Craig!! |
Re: Project: "Square Corvette"
Quote:
so I can drive and enjoy Her every single day :smoke: |
Re: Project: "Square Corvette"
Trailered her to the SETN Truck Show, Here's a nice Shot Asa (See Ten) took. :metal:
http://i272.photobucket.com/albums/j...s/100_5896.jpg :5150: |
Re: Project: "Square Corvette"
looking good
|
Re: Project: "Square Corvette"
Very nice! I love the head lights, what type are those?
|
Re: Project: "Square Corvette"
No idea, found them on E-Gay, took out the Blueish H4 bulbs
that came with them and then put in 6K Slim Ballast HID's :D |
Re: Project: "Square Corvette"
WOW! back from the dead! ( i'm one to talk) Looks Great!
|
Re: Project: "Square Corvette"
so where do you get the smooth bumper, or did you make it your self?
Thanks Dave. |
Re: Project: "Square Corvette"
Quote:
http://www.goodmarkindustries.com/pr...=4143-000-672X Pricey but nice. |
Re: Project: "Square Corvette"
Quote:
|
Re: Project: "Square Corvette"
TY Guys, and Yes 71 above me is correct, Bumper came from Top Banana
|
Re: Project: "Square Corvette"
looks good...when do you go on vacation, lost track in my PM's
|
Re: Project: "Square Corvette"
build looks great.
|
Re: Project: "Square Corvette"
Removed the PS Pump today so I can put a new shaft seal in it
before trailering Her down to CTC in October. Brand New pump, but was shelved for almost 2 years, = leaks like me after having several Margaritas. :D Mailed my registration off today so the 72 & the 00 will both be headed south just 2 months from today! :eek: |
Re: Project: "Square Corvette"
Quote:
|
Re: Project: "Square Corvette"
Napa, turns out the shaft was installed crooked. (Defect from factory)
I'm getting a New pump Mon. (This is a 95ish Serp Set-up, not OEM) |
Re: Project: "Square Corvette"
Where did u get your fiber glass shaved cowl?
|
Re: Project: "Square Corvette"
Quote:
I think it was overpriced. I'm probably going to chalk it up as a loss because it fits like crap at the ends and I'm not sure that a fiberglass guy can fix it like it is. Live & Learn |
Re: Project: "Square Corvette"
well that sux! Life's lessons tend to hurt the wallet.
off the subject a little a bought a 2wd blazer but needs the front floor replaced are truck replacements the same as the blazers?? any differances?? thanks |
Re: Project: "Square Corvette"
Not sure on the pans, but I think so. I didn't have to replace mine
since they are OE. I know "Ron 586" is putting a whole floor pan in his 2wd using that replacement Goodmark truck floor 1 piece unit. PS - Drove it to dragstrip last Friday night, gotta do something on those Cool headlights to mod them a lil, they suck ass at night, lol. |
Re: Project: "Square Corvette"
2 Attachment(s)
Your Blazer is why mine is at the shop. They had a car show there and throw it together just for the show. It is the "Grey Ghost" for now. Primer is to a color!!!!!
|
Re: Project: "Square Corvette"
What are you going to do for bumpers? Stock?
|
Re: Project: "Square Corvette"
any updates??
|
Re: Project: "Square Corvette"
No updates. Life has happened and it's just sitting in the
shop covered on skates. In a 3 month period I had three vehicle breakdowns, (Only afford to fix 2 out of 3 = $700) garage spring & garage opener, ($400) pet wireless died, ($300) hot tub breaker blew, ($50) $15K in Hail damage, & Wife's needed tires. ($1250) so savings is emptied now. Hoping to have it down at CTC in October, but not 4 sure cause "Gas Hog" is still broke down and it's my Tow Rig. It needs around $1500 in repairs. (Cam, so lifters and P rods) |
All times are GMT -4. The time now is 11:36 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com