Re: My '67 Fleetside C10 renew
Quote:
|
Re: My '67 Fleetside C10 renew
I'll update tonight. I've got one side bout done. The sander is awesome! Should have gotten that thing a LONG time ago.
|
Re: My '67 Fleetside C10 renew
Quote:
|
Re: My '67 Fleetside C10 renew
Quote:
It's shocking how much sandpaper and supplies it takes when you do all the panels on these trucks. Did you say what your plans are for the motor? Sorry if I missed it. Looking forward to more updates soon. |
Re: My '67 Fleetside C10 renew
3 Attachment(s)
I would recommend this thing to anyone doing more than a few panels. It's not a finish tool but it gets you really close in a hurry. No longer worry so much about how flat you lay your filler on or them berms you make when you overlap with your spreader. Also, after your filler hardens there's always that slick, hard "glaze" to it that's a drag to cut through with the block - easy peasy now! I'd say that with this and a very small amount of hand blocking I'll be able to epoxy it. I'm sure there will be lots of places that need more filler but they'll be small. Guide coat will tell. I dunno about the paper I got - "Dura-Gold". I'm using P80 and it seems to clog up quicker than I'd think it should. Still kicks-arse, but seems that the best sandpaper always says 3M or Made in Canada.
I've got an old small journal 327 with it's forged crank and camel hump heads. Plan now is to zero deck, cool pistons and rods, roller cam, single plane (painted), painted headers, script covers with no holes, Holley, snorkel filter housing, filler tube with PCV provisions, HEI with mods for a bit more RPM. This is what I really want. ZERO chrome and plain-Jane but making real power past 6500. Kind of a Z28 theme with my Muncie and 15's/poverty caps with white letters on 50's. Dual fours under a single snorkel filter housing??? - would that be *****in or what!? On the other hand - Vortec 5.7 (383 of course). Got some new lights in the work room:metal: New ride for Wifey:metal: And I'm going outside to work on the bed:metal: |
Re: My '67 Fleetside C10 renew
I want your shop, oh and great progress! Hurry up and get some paint on that thing.
|
Re: My '67 Fleetside C10 renew
I want your shop too. You could hang 6 Camaros from the rafters in that place.
You'll Zing that bed out Sick Like. Nothin like keepin the Wifey happy with a new ride. |
Re: My '67 Fleetside C10 renew
The shop is drama for me. It's an awesome building with way better concrete than you'd expect. Lots of room. I'm moving though. We kind of got forced into this place because the clock was ticking. We had five kids under the roof four years ago and in another couple years we'll be down to one. I want to be further in the woods. I'd really like to deck it out, but not just for the next owner. It's almost as hard as planning a truck build and sticking to it!
|
Re: My '67 Fleetside C10 renew
Nice sled for Momma. I gots to get me one'a them sanders. Lookin' like good progress!
|
Re: My '67 Fleetside C10 renew
Killer progress on the bed! You are where I was on my bed last fall. Looks like the new air file works great. I have that on my shopping list.
Keep up the progress |
Re: My '67 Fleetside C10 renew
Thanks dudes! Wifey hopped in her new ride and went to see her Momma so I've got tonight and this weekend to get busy! I got one side whipped last night and picked up some more filler and epoxy today. After just a little practice I've got the sander figgered out good and MAN I wouldn't do it again without one. You don't just lay into it with this thing. Kinda like taking short bursts and leaving it just a little high. Then take your hand block and feather it out. WAY, WAY faster and very flat. I've got a pair of 110V compressors set up as lead-lag and the second one rarely even kicks on. If you hammered down it'd kill the both of them. I'm going to do all I can to get this thing sealed up on Sunday.
Oh, and I should retract my previous comment on the Dura-Gold paper. I've only changed it out like 4 times and lemme tell ya, there's some dust on the floor! |
Re: My '67 Fleetside C10 renew
Quote:
|
Re: My '67 Fleetside C10 renew
I have a feeling you'll be able to do yours with nothing but a Scotchbrite! I've been through a gallon can Evercoat and three tubes of Halftime. Just picked up number four. I'm sure I've swept up about 80% of that :lol:
|
Re: My '67 Fleetside C10 renew
Well, I'd like to think that....
Been working on it, just made some chow. Headed back out, pics on Sunday :metal: |
Re: My '67 Fleetside C10 renew
I'm so wishing I was at were your at. Knock that bed out!
|
Re: My '67 Fleetside C10 renew
1:00am, got tons done. I can smell the eggs and coffee!
|
Re: My '67 Fleetside C10 renew
Go John Go! Can't wait to see the outcome!
|
Re: My '67 Fleetside C10 renew
nice work shortening the bed !
|
Re: My '67 Fleetside C10 renew
Quote:
Quote:
I've been at it since early this morning. Couple trips to town in there but otherwise to the bone. Just came in to eat then I'm headed back out. Made the rookie mistake, didn't want to drive down town for Half Time so I got a bucket of Bondo brand bondo at the jiffy mart. What an idiot! The stuff takes longer than Archie Bunker to get hard then still just instantly clogs the paper. Dunno if I'll get any primer out tomorrow :confused: I've done a jillion cycles - filler, sand, filler, sand, filler, sand.... and still have plenty to touch. I didn't open any gearboxes in here but the house is wasted. I gotta get the stink outta here before Wifey gets home.... Brats are burning, will report with some photos tomorrow! |
Re: My '67 Fleetside C10 renew
Have computer monitor on, My '67 Fleetside C10 renew page is up. hitting refresh every 10 minutes. MUST SEE BED RESULTS. refresh..............refresh..............refresh...........
|
Re: My '67 Fleetside C10 renew
Nice job!
|
Re: My '67 Fleetside C10 renew
I like how this is turning out. Bed looks very good. Will be tagging along.
|
Re: My '67 Fleetside C10 renew
Quote:
|
Re: My '67 Fleetside C10 renew
Looking good. I can't wait to see some color on it. Keep up the nice work.
|
Re: My '67 Fleetside C10 renew
Just came across your build. Nice work! Im a huge fan of butternut and white. Truck is gonna be killer.
|
All times are GMT -4. The time now is 09:03 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com