Re: 67 cheby's Dropmember build thread (CLOUD 9)
 

How long will the driveshaft be?

Re: 67 cheby's Dropmember build thread (CLOUD 9)
 

Latche looks nice, so what are you bringing to the GitDown ? 9.5 or sloshtubs:lol::lol:

Re: 67 cheby's Dropmember build thread (CLOUD 9)
 

around 59-60 inches

Re: 67 cheby's Dropmember build thread (CLOUD 9)
 

TONs and TONS of TUBZ!

Re: 67 cheby's Dropmember build thread (CLOUD 9)
 

First time setting the bed back on the frame, now to build some mounts and get it all fitting correctly!

Re: 67 cheby's Dropmember build thread (CLOUD 9)
 

Raising the floor higher or bigger notch cover?

Re: 67 cheby's Dropmember build thread (CLOUD 9)
 

i am not much of a fan of the super shallow beds so i will just build a bigger notch cover

Re: 67 cheby's Dropmember build thread (CLOUD 9)
 

last night i started working on another of Cloud 9's problem areas. The self leveling Evercoat drip rail sealer that we used had started cracking, it made me worried that some rust had came up from underneath. I had personally cleaned it out the first time and i knew that the metal was perfect underneath. Turns out it is still perfect so i have no idea why it cracked out. I also had a couple bubbles come up in the cab corner area, i guess there must be some tiny pinholes in some of the weld spots?

Re: 67 cheby's Dropmember build thread (CLOUD 9)
 

I decided to go ahead and switch up the firewall some while i am at it, this is the rough draft

Re: 67 cheby's Dropmember build thread (CLOUD 9)
 

Going all the way! Please tell me you’re sticking with the same color

I like the firewall, assume the lines are bead roll? They look better with a little bit of detail, instead of completely flat, in my opinion. What’s the price on a set of those?

Re: 67 cheby's Dropmember build thread (CLOUD 9)
 

maibe fill it wit tin and resand it smooth

Re: 67 cheby's Dropmember build thread (CLOUD 9)
 

thanks, the ones i sell on the website are $149 shipped (www.sloshtubz.net)

Re: 67 cheby's Dropmember build thread (CLOUD 9)
 

Mike, I know you have been busy with shows, and products, but come on man, some of us don't have instagram and what to see whats up with the truck..

great work brother

AC

Re: 67 cheby's Dropmember build thread (CLOUD 9)
 

LOL...sorry man, i will get back on her soon and post some progress!

Re: 67 cheby's Dropmember build thread (CLOUD 9)
 

Mike... I have heard several issues with the Evercoat self leveling sealer... The best out there is the 3M part #08307...

This is what I used on Papa J...