Originally Posted by 60burb4me (Post 8771728)

i sent the money but forgot to put in
73-91 k5 blazer jimmy rear sill cuff plates new
My name is Sean. please let me know you received it and we are good.
thank you

Originally Posted by Irish1941 (Post 8276173)

TTT
Sold out for now. Many thanks to all those who got one.
I may do 2nd run in next few weeks.
I do have a few with minor scratches. Most could be sanded and polished out.
If you need something not 100% show truck, send me a PM.
$80 shipped in lower 48.

Originally Posted by Hayward carter (Post 9036921)

Originally Posted by Irish1941 (Post 8212522)

*BACK IN STOCK. Shipping March 12th, 2020! GO TO LAST PAGE!
After a lot of false starts over last few yrs, , pretty stoked I finally got these ready to go. It's a fairly complex piece to make but I'm happy with way they turned out. I'm real picky when it comes to my truck and wanted a product that I would I buy.

These fit all full size Blazers & Jimmy from 1973 to 1991. I checked those against a bunch of trucks and against several plates.
The 73-91 rear scuff plate is often trashed and just plain missing and NOS is long gone and not cheap if you do find one.

Made in right here in California from US material.
Not made overseas whatsoever!

I made them thicker than the originals so they are a little more dent resistant and also made rear lip that sits on the carpet longer so carpet stays put.
They come covered in protective vinyl with a mill finish that matches original but can be polished to a mirror if thats look you want.
I will also be including proper GM small head oval #8 screws with the plate.
Plate works best on fresh carpet or rubber mat with underlay. They work fine on old carpet but sometimes they can get caught under the tail gate if carpet is really mashed down. Flattened carpet can put plate at wrong angle.

They are NOW $110 shipped anywhere in lower 48.
Look over the pix and PM or reply here with questions.
Installed in another members K5 who was part of the in field testing team. :)
https://farm5.staticflickr.com/4791/...f899fbf6_z.jpg

https://farm5.staticflickr.com/4778/...b4306117_z.jpg
Before pix in my official test mule!
https://farm5.staticflickr.com/4802/...9a442538_z.jpg
After
https://farm5.staticflickr.com/4773/...ab3432d2_z.jpg
Profile. Top is GM bottom is my plate.
https://farm5.staticflickr.com/4776/...74f798c3_z.jpg

Originally Posted by Hayward carter (Post 9036921)

Originally Posted by Irish1941 (Post 8222445)

And shipped. Thanks again.

Originally Posted by Irish1941 (Post 8212522)

*BACK IN STOCK. Shipping March 12th, 2020! GO TO LAST PAGE!
After a lot of false starts over last few yrs, , pretty stoked I finally got these ready to go. It's a fairly complex piece to make but I'm happy with way they turned out. I'm real picky when it comes to my truck and wanted a product that I would I buy.

These fit all full size Blazers & Jimmy from 1973 to 1991. I checked those against a bunch of trucks and against several plates.
The 73-91 rear scuff plate is often trashed and just plain missing and NOS is long gone and not cheap if you do find one.

Made in right here in California from US material.
Not made overseas whatsoever!

I made them thicker than the originals so they are a little more dent resistant and also made rear lip that sits on the carpet longer so carpet stays put.
They come covered in protective vinyl with a mill finish that matches original but can be polished to a mirror if thats look you want.
I will also be including proper GM small head oval #8 screws with the plate.
Plate works best on fresh carpet or rubber mat with underlay. They work fine on old carpet but sometimes they can get caught under the tail gate if carpet is really mashed down. Flattened carpet can put plate at wrong angle.

They are NOW $110 shipped anywhere in lower 48.
Look over the pix and PM or reply here with questions.
Installed in another members K5 who was part of the in field testing team. :)
https://farm5.staticflickr.com/4791/...f899fbf6_z.jpg

https://farm5.staticflickr.com/4778/...b4306117_z.jpg
Before pix in my official test mule!
https://farm5.staticflickr.com/4802/...9a442538_z.jpg
After
https://farm5.staticflickr.com/4773/...ab3432d2_z.jpg
Profile. Top is GM bottom is my plate.
https://farm5.staticflickr.com/4776/...74f798c3_z.jpg

Originally Posted by bigschuss (Post 9072957)

Just FYI....Irish has not been on the forum since last summer, which was when I bought one from him. And the one I got was just about the last one he had. In fact, it was one of his prototypes and didn't fit 100% correctly. I had to have a local machine shop fix some of the bends to get it to fit.

I spoke with Irish on the phone last summer...the guy on Ebay selling these is not Irish.