The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 4 of 13

Last »

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - OR Serpentine belt conversions (https://67-72chevytrucks.com/vboard/showthread.php?t=503044)

tll74

11-29-2012 02:39 AM

Re: Serpentine belt conversions

Quote:

Originally Posted by TobyArnot (Post 5727616)

.
Well Tom, Some months later, but I think I'm ready. I would like conv. for Small Block with A/C, P/S, Alt. complete, shipped to 29708 ? ? Do you include the late model water neck?
.
Hope I can stand shipping

I'll get a shipping quote in the morning.

Quote:

Originally Posted by dbcampbell3 (Post 5727660)

PM sent

PM's sent back

TobyArnot

12-04-2012 08:06 AM

Re: Serpentine belt conversions

Quote:

Originally Posted by tll74 (Post 5729445)

I'll get a shipping quote in the morning.

.
Which morning? LOL

tll74

12-05-2012 03:18 AM

Re: Serpentine belt conversions

Quote:

Originally Posted by TobyArnot (Post 5738927)

.
Which morning? LOL

LOL...you noticed I didn't say which morning. I did check and it was 68.71 via UPS. Busy busy at work covering for a couple guys off on vac. I just missed getting back to you. Thanks, Tom

TobyArnot

12-05-2012 05:56 PM

Re: Serpentine belt conversions

Thanks Tom,
.
What's the total ticket? Do you have a water neck?
.
PayPal??

tll74

12-05-2012 08:17 PM

Re: Serpentine belt conversions

293.71...paypal fine...yes on the filler neck. PM me if you want to pull the trigger and for paypal addy. Thanks, Tom

TobyArnot

12-06-2012 10:58 AM

Re: Serpentine belt conversions

PM sent

tll74

12-07-2012 10:00 PM

Re: Serpentine belt conversions

Quote:

Originally Posted by TobyArnot (Post 5743107)

PM sent

PM sent back

425HP409

12-09-2012 02:07 AM

Re: Serpentine belt conversions

I would like a Big Block kit
Charles
Posted via Mobile Device

tll74

12-09-2012 01:30 PM

Re: Serpentine belt conversions

Quote:

Originally Posted by 425HP409 (Post 5748226)

I would like a Big Block kit
Charles
Posted via Mobile Device

I have two big block kits. The one pictured earlier in this thread and a twin to it. 325.00 plus shipping. I need to know what year your engine is and Zip code for shipping cost. Thanks, Tom

TobyArnot

12-10-2012 10:05 AM

Re: Serpentine belt conversions

Quote:

Originally Posted by tll74 (Post 5742057)

293.71...paypal fine...yes on the filler neck. PM me if you want to pull the trigger and for paypal addy. Thanks, Tom

.
PayPal sent per PM instructions, also added to $100 for the detailing - Let me know when you ship, and thanks again.

425HP409

12-10-2012 06:09 PM

Re: Serpentine belt conversions

My engine is a 75 in an El Camino. Can you give me the distance with it mounted on an engine from the water pump mounting pad on the engine to the front of the fan blade? I want to make sure that it will fit my truck as my fan is pretty close to the radiator with a thin fan shroud. I want to keep the fan as I have experimented with electric fans and they don't work in Texas heat with the horsepower I have. My zip is 75034
Thanks, Charles

tll74

12-11-2012 02:28 AM

Re: Serpentine belt conversions

Quote:

Originally Posted by TobyArnot (Post 5750150)

.
PayPal sent per PM instructions, also added to $100 for the detailing - Let me know when you ship, and thanks again.

Will do. Thanks!

Quote:

Originally Posted by 425HP409 (Post 5750940)

Chares, I'll get both the measurement and shipping cost. Thanks Tom

425HP409

12-29-2012 01:41 AM

Re: Serpentine belt conversions

Quote:

Originally Posted by tll74 (Post 5751911)

Will do. Thanks!

Chares, I'll get both the measurement and shipping cost. Thanks Tom

Tom, have you been able to get the measurement for me?
Charles
Posted via Mobile Device

ScottTRD

12-29-2012 05:34 AM

Re: Serpentine belt conversions

Do you have any SBC kits still available?

tll74

12-29-2012 01:15 PM

Re: Serpentine belt conversions

Quote:

Originally Posted by 425HP409 (Post 5783018)

Tom, have you been able to get the measurement for me?
Charles
Posted via Mobile Device

Charles, sorry I forgot to get it..been a bit busy busy and kinda spaced it. I'll get it soon.

Quote:

Originally Posted by ScottTRD (Post 5783178)

Do you have any SBC kits still available?

YES I do.

Thanks, Tom

ScottTRD

12-29-2012 05:27 PM

Re: Serpentine belt conversions

Can you give me total price to zip 27534?

ScottTRD

12-30-2012 05:19 PM

Re: Serpentine belt conversions

Please check your messages.

shrek55

01-01-2013 05:48 PM

Re: Serpentine belt conversions

How much for SBC kit without a/c compressor? Zip code. Is 07003, thanks
Posted via Mobile Device

425HP409

01-02-2013 02:39 AM

Re: Serpentine belt conversions

Tom, I still want the big block kit.
Charles
Posted via Mobile Device

tll74

01-05-2013 02:20 AM

Re: Serpentine belt conversions

Quote:

Originally Posted by ScottTRD (Post 5785760)

Please check your messages.

Checked and PM returned

Quote:

Originally Posted by shrek55 (Post 5789535)

How much for SBC kit without a/c compressor? Zip code. Is 07003, thanks
Posted via Mobile Device

50.00 less so 175.00 plus 61.00 shipping.

Quote:

Originally Posted by 425HP409 (Post 5790608)

Tom, I still want the big block kit.
Charles
Posted via Mobile Device

I've been away from the shop on vacation. I'll be back on Monday and for sure will get your measurement.

Thanks guys, Tom

TobyArnot

01-05-2013 12:24 PM

Re: Serpentine belt conversions

Quote:

Originally Posted by TobyArnot (Post 5750150)

.
PayPal sent per PM instructions, also added to $100 for the detailing - Let me know when you ship, and thanks again.

.

Hey Tom, My new motor is here, sure could use the serpentine set-up.
.
Thanks,
Robbie

tll74

01-06-2013 02:14 PM

Re: Serpentine belt conversions

1 Attachment(s)

Hi Robbie, You should have it Wednesday. Here is a pic of it just before packaging. The fan is not in the pic. It turned out very nice. Sorry for the delay to many speed bumps during the hoildays among other things. You should like it. Thanks, Tom

TobyArnot

01-06-2013 05:59 PM

Re: Serpentine belt conversions

I know about the extra stress this time of year. I am excited to get this stuff on the motor and buttoned up. I didn't mean to put pressure on you and I appreciate the diligence. Thanks again

425HP409

01-07-2013 10:57 AM

Re: Serpentine belt conversions

Quote:

Originally Posted by tll74 (Post 5796820)

Checked and PM returned

50.00 less so 175.00 plus 61.00 shipping.

I've been away from the shop on vacation. I'll be back on Monday and for sure will get your measurement.

Thanks guys, Tom

Tom, just a reminder for my measurement. I need from the water pump mounting to the front of the fan clutch.
Charles

First c10

01-08-2013 05:59 PM

Re: Serpentine belt conversions

How do you connect the radiel compressor to the current A6 style compressor? or what referegerant lines do you need? ok try this again? Can you provide me with part numbers of the A/C lines that would fit the old A/C system to a newer compressor??? hope this makes sense...
Thanks

All times are GMT -4. The time now is 05:21 AM.

Page 4 of 13

Last »

Show 40 post(s) from this thread on one page