Re: Project: B.A.D. 1976 K30 CCLB
Nice progress, but one question. If it's a CCLB, why does the frame need to be cut down?
|
Re: Project: B.A.D. 1976 K30 CCLB
Looking good Ryan! It was a CCLB, but now he cut it to make it a CCSB.
|
Re: Project: B.A.D. 1976 K30 CCLB
ahhh didn't catch that part. I still wish I would have gotten the CCLB instead of the CCSB when I had the option... I went with the SB because it was intercooled 2001 instead of the LB 97 non intercooled.
|
Re: Project: B.A.D. 1976 K30 CCLB
I worked on it more this morning. I'm almost finished up with the welding and grinding. I want this to appear un noticeable when you look at the frame. I was going to plate the out side, but I think that may interfere with side tanks. So, I'm going to use the pieces I cut out of the frame and make sleeves that go inside the frame. They will bolt in and if I have room after I get the fuel tanks on, then I may plate the out side. I doubt it'll need it with a sleeve though. More pics.
http://i181.photobucket.com/albums/x...NSTRUCK001.jpg http://i181.photobucket.com/albums/x...NSTRUCK002.jpg http://i181.photobucket.com/albums/x...NSTRUCK003.jpg http://i181.photobucket.com/albums/x...NSTRUCK005.jpg Here's my brother starting to remove the old pieces left over from a 6.9 IDI cross member I had in it years ago. http://i181.photobucket.com/albums/x...NSTRUCK004.jpg Here's a pic of the DIY4X shackles I got. Notice how beefy they are! http://i181.photobucket.com/albums/x...NSTRUCK006.jpg |
Re: Project: B.A.D. 1976 K30 CCLB
good progress man!!
|
Re: Project: B.A.D. 1976 K30 CCLB
Here we go! The box is sat on it and it's looking like a truck again! We removed the 3" body lift and it looks like I may need to remove a leaf from the rear springs to get this to sit level with an engine and drive train in it. Now I have to decide if I want to cut the frame for the box to sit on it right, or cut the box and leave the frame so I can have enough room to mount a sturdy step bumper? Decisions, decisions! I have to get or find radiator support bushings so I can get the front sheet metal bolted on it. This truck is going to have to go back out side for a while and wait until I get some other things done before any more work gets done to it.
No more body lift. http://i181.photobucket.com/albums/x...NSTRUCK007.jpg Frame primered to keep rust off while it sits out doors. http://i181.photobucket.com/albums/x...NSTRUCK008.jpg http://i181.photobucket.com/albums/x...NSTRUCK009.jpg Box sat on to get a feel for how a CC SWB looks. http://i181.photobucket.com/albums/x...NSTRUCK014.jpg http://i181.photobucket.com/albums/x...NSTRUCK015.jpg More clean up on the front frame cross member area. http://i181.photobucket.com/albums/x...NSTRUCK010.jpg http://i181.photobucket.com/albums/x...NSTRUCK011.jpg |
Re: Project: B.A.D. 1976 K30 CCLB
notch the frame so the box sits down properly and then give me a call, lol,
|
Re: Project: B.A.D. 1976 K30 CCLB
I might just cut it off seeing how the last 1" or so may not be needed. When I get to that point I might just call you for at least a rear bumper. For now, the $$$ will be going into getting the poor thing driving. :lol:
|
Re: Project: B.A.D. 1976 K30 CCLB
I can't believe you got pictures of nck working. I about fell out of my chair from a heart attack when i saw that lol.
|
Re: Project: B.A.D. 1976 K30 CCLB
Lmao!~
|
Re: Project: B.A.D. 1976 K30 CCLB
Looking good buddy! I just noticed that your truck is a 4x4 convertee as well. Got any pictures of that front cross member that holds the springs? It almost looks like that would give you some extra lift over the stock mounts but i noticed that you have what looks to be stock shackles on the rear.
|
Re: Project: B.A.D. 1976 K30 CCLB
Quote:
no problem, it'd give me a reason to cut parts for 2 at once, I'm gonna build a set for my CCDRW that I got the parts from you for, just have to decide on how many lights I want other than the backups |
Re: Project: B.A.D. 1976 K30 CCLB
Quote:
Here's a pic of it a while ago when it had the 6.9 in it too. http://i181.photobucket.com/albums/x...0/IMG_1243.jpg |
Re: Project: B.A.D. 1976 K30 CCLB
Quote:
|
Re: Project: B.A.D. 1976 K30 CCLB
Here is a little something to look at while I work on rounding up money to buy new parts and paint for this truck.
http://i181.photobucket.com/albums/x...0/DSC00322.jpg http://i181.photobucket.com/albums/x...0/DSC00332.jpg http://i181.photobucket.com/albums/x...0/DSC00328.jpg http://i181.photobucket.com/albums/x...0/DSC00327.jpg http://i181.photobucket.com/albums/x...0/DSC00326.jpg http://i181.photobucket.com/albums/x...0/DSC00323.jpg http://i181.photobucket.com/albums/x...0/DSC00329.jpg http://i181.photobucket.com/albums/x...0/DSC00330.jpg http://i181.photobucket.com/albums/x...0/DSC00331.jpg I went ahead and cut off the rear portion of the frame because it looked goofy when I notched it. http://i181.photobucket.com/albums/x...0/DSC00325.jpg In case any one is curious, 4 out of the 8 bolt holes worked for the bed. I only have to drill 4 new holes and the bed will be totally bolted down. |
Re: Project: B.A.D. 1976 K30 CCLB
Quote:
http://i490.photobucket.com/albums/r...708111712a.jpg the one pictured seams to be the most popular configuration of lights in the rear because I have sold 5 or 6 of them set up like this |
Re: Project: B.A.D. 1976 K30 CCLB
I think on the front I was just going to use a stock one since I have a nice bumper/spoiner for it. On the rear bumper, I'd only want back up lights and not the extra ones like that one you have on yours.
|
Re: Project: B.A.D. 1976 K30 CCLB
Quote:
|
Re: Project: B.A.D. 1976 K30 CCLB
y did u get rid of the gmc grill???
|
Re: Project: B.A.D. 1976 K30 CCLB
I think thats the most that truck has been put together since you had it at tasty tacos
|
Re: Project: B.A.D. 1976 K30 CCLB
Quote:
|
Re: Project: B.A.D. 1976 K30 CCLB
Looking good! Hows the engine coming?
You had a D44 under it? (the picture with the custom shaped tie rod) :D |
Re: Project: B.A.D. 1976 K30 CCLB
Quote:
Yep, it had a D44HD under it ever since I converted it to 4wd. Now it's in Brother's69C10's 88 V30 and I have my D60 under this truck finally. |
Re: Project: B.A.D. 1976 K30 CCLB
nice work..can't wait to see the engine!
|
Re: Project: B.A.D. 1976 K30 CCLB
Unfortunately, I made no progress on the engine this weekend. IDK when I'm going to get it together.
|
All times are GMT -4. The time now is 04:18 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com