|
Re: Slowly I build a truck
5 Attachment(s)
I went with Painless wiring harness from Summit Racing. It was $287 after $100 rebate. I wasn't prepared for having to cut the firewall, but it was pretty easy with a dremel tool.
|
Re: Slowly I build a truck
5 Attachment(s)
Sorting the wires was kind of fun. It made me feel like I'm actually going to have a truck!
|
Re: Slowly I build a truck
5 Attachment(s)
New speakers and radio:
|
Re: Slowly I build a truck
Looking good!!!
|
Re: Slowly I build a truck
Nice....Jim
|
Re: Slowly I build a truck
how come you covered the speaker? dust preventive?
looks good either way |
Re: Slowly I build a truck
Thanks guys. I covered the speakers partly to prevent dust, but mostly because the old one was covered, and if someone looks through the grate I want it to look as original as possible. I realize I've already stepped away from original, but that's the thought process.
|
Re: Slowly I build a truck
5 Attachment(s)
Hooking up wires for heater, washer, and wiper switch. It's starting to get crowded under here.
|
Re: Slowly I build a truck
5 Attachment(s)
Glove box and light. That was hard. It's a good thing it will be mostly hidden.
|
Re: Slowly I build a truck
Nice progress....yeah, those glove boxes are a pain to install!
|
Re: Slowly I build a truck
5 Attachment(s)
cigarette lighter -- old and new:
|
Re: Slowly I build a truck
Looks a little better ;) And it's got the light!
|
Re: Slowly I build a truck
5 Attachment(s)
New cab light and door switches:
|
Re: Slowly I build a truck
2 Attachment(s)
New headlight switch:
|
Re: Slowly I build a truck
4 Attachment(s)
Getting ready for ignition:
|
Re: Slowly I build a truck
Looking good!
|
Re: Slowly I build a truck
Thank you!
|
Re: Slowly I build a truck
1 Attachment(s)
This looks a little bit better for the glove box:
|
Re: Slowly I build a truck
Your build is coming along great. If this is a slow build I cannot think of what to call mine. I took three years from the purchase to getting it up and driving again. Keep up the good work.
Bryce |
Re: Slowly I build a truck
5 Attachment(s)
New Turn Signal Switch, Backup Light Switch, and column seal:
|
Re: Slowly I build a truck
5 Attachment(s)
Putting it together:
|
Re: Slowly I build a truck
5 Attachment(s)
New Shifter - I had to use a dremel tool to shave the ball on the end down a bit for it to fit. The painless wiring kit makes you re-use the original half moon connector. I never could make the old terminals release with a paper clip or small screwdriver, so I just pulled them through with needle nose pliers.
|
Re: Slowly I build a truck
5 Attachment(s)
Wrapping wires:
|
Re: Slowly I build a truck
3 Attachment(s)
Learning to solder and shrink-wrap :
|
Re: Slowly I build a truck
5 Attachment(s)
Gauges are hooked up with new light bulbs.
|
| All times are GMT -4. The time now is 08:38 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com