Re: 1969 - 70 cab cuts and parts from part out
 

Jay,
Just read that the high note horns have an "H" with a circle around it, the lows probably have no markings

Re: 1969 - 70 cab cuts and parts from part out
 

That is what I figured would work, but thought maybe there was another way to identify them. I'll check it out and get back with you. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

Jay,
I could also use some blue or black seat belts, if you have any...all I really need are the plastic buckle covers/push buttons/springs. I can always paint to match....let me know.
Ben
:metal:

Re: 1969 - 70 cab cuts and parts from part out
 

Will check for them while I am in Centralia tomorrow too. I did find three horns, but haven't had time to test them yet. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

I do indeed have that portion of the cowl and will cut it out for you. I think I can get it in a flat rate box of the $13.45 variety or smaller. So if you are OK with $25.50 total for everything that will work for me. PayPal is 1windyridgeboy@gmail.com
Thanks, Jay

Re: 1969 - 70 cab cuts and parts from part out
 

Jay,
Any luck on the horns and seat belts?
Let me know
Ben (816)956-1202

:metal:

Re: 1969 - 70 cab cuts and parts from part out
 

Ben - looked yesterday in Centralia, but found none. Will search here at home again, I know I have some and will find them this a.m. I'm sure. Got home really late last night so today first chance to follow up. I will be in touch before the day is over. Thanks for your patience Ben. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

Ben I sent you a text with photos of the seat belts I had and put in a note regarding the horns. Let me know if you didn't receive them and I will send again. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

I need the floor in the cab corners for a 69,I seen in your picture of the green body they look decent

Re: 1969 - 70 cab cuts and parts from part out
 

Let me get a photo or two that shows it better than the first ones in this post. Then you can tell me what parts you want or if you are still interested. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

ok

Re: 1969 - 70 cab cuts and parts from part out
 

How much for the pass a pillar shipped to 94503

Re: 1969 - 70 cab cuts and parts from part out
 

Here are photos of what it looks like - let me know if it will suit your needs:

Attachment 1509135

Attachment 1509136

Attachment 1509137

Attachment 1509138

Attachment 1509139

Re: 1969 - 70 cab cuts and parts from part out
 

More:

Attachment 1509140

Re: 1969 - 70 cab cuts and parts from part out
 

Are you asking about this piece only on the other side (passenger side)?

Attachment 1509156

Let me know if it is because I do still have that piece. and can price it when I find out if we are thinking about the same piece. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

The passenger side looks decent ,How much to cut that corner from the cab mount out.
Also wondered if you have any step box fenders you can cut up.

Re: 1969 - 70 cab cuts and parts from part out
 

$30 and shipping - what is your zip code? Also, don't have any more step side fenders right now. I have some good steps and brackets though if you need those. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

Thanks Jay,I've been under the cab this morning and I found some other issues,so I'm going to pass for now.Keep me in mind on the fendaers
Menno

Re: 1969 - 70 cab cuts and parts from part out
 

Not a problem Menno. If there are enough bad places in the entire floor it might make more sense dollar wise to get one of the new complete floor pans with all supports pre-welded in to replace old one. I have a good friend that used one on a 67 recently and said it went in very well. Just a thought, Jay

Re: 1969 - 70 cab cuts and parts from part out
 

Time for a little bump.

Re: 1969 - 70 cab cuts and parts from part out
 

Mid week bump.

Re: 1969 - 70 cab cuts and parts from part out
 

Jay,
Haven't forgot you, just haven't been able to get to the post office. I'll get that out this week for sure.
Ben
:metal:

Re: 1969 - 70 cab cuts and parts from part out
 

Sounds to me like your boss should go for you - they are the reason you can't get there. :devil:

Re: 1969 - 70 cab cuts and parts from part out
 

if the floor is not sold how much is it that's way better than mine

Re: 1969 - 70 cab cuts and parts from part out
 

I do still have it and I would take $80.00 plus shipping to you. I'm not sure how would be least expensive way to ship, or what shipping place would handle it - but surely someone would. Jay