Re: Where's the 3/4 ton love?
 

Re: Where's the 3/4 ton love?
 

I really like your wheels.

Re: Where's the 3/4 ton love?
 

i have a 1966 chevy 3/4 t survivor needing help. its the damn power steering ram and control valve> where in the world are the repair parts. mine is leaking and quickly losing power steering! advice, referrals etc all welcome! thanks

Re: Where's the 3/4 ton love?
 

the rams you can get new or have yours rebuild . the control valve is the standard chevy unit try a corvette restoration place they should have all the parts except the hoses. that what i did on my 66

Re: Where's the 3/4 ton love?
 

thanks for the work around. i found another place called chevyps.com and they have all the parts either new or rebuilt. great site recommended on another thread. thanks again.

Re: Where's the 3/4 ton love?
 

Heres a few pictures of my truck before I sold it .... Miss this truck !!

Re: Where's the 3/4 ton love?
 

Nice Wheels
Posted via Mobile Device

Re: Where's the 3/4 ton love?
 

Re: Where's the 3/4 ton love?
 

Hubcaps on modern 16" 8 lug bump type wheels???? How does that work? Did you install clips on these wheels? Or are they 16.5" clip type wheels?

Re: Where's the 3/4 ton love?
 

A little investigation is in order. I knew somewhere there were some caps that may fit newer wheels. I have a 90's set of 8 lug chevy wheels, and it looks like my 66 3/4 t caps fit very close. I have to do some r&d and i cant do that quite yet. But i think i can make them work. I will post some pics....sometime. lol

Re: Where's the 3/4 ton love?
 

Hmmm, what am I missing? the 16" bump wheels I have require a large cap with 11-3/4" inside, no flange. Where'd ya get those wheels, and how big were those caps? I don't get it. :confused:

Re: Where's the 3/4 ton love?
 

my 3/4 ton has a set of ford 16" steelies with the hubcap bumps. They take a very large hub cap. I would love to know what 8 hole wheel will take regular caps!

Re: Where's the 3/4 ton love?
 

do we have pictures of this ? new to me

Re: Where's the 3/4 ton love?
 

I was searching for 16 inch Hubcaps and found this:

http://67-72chevytrucks.com/vboard/s...4&postcount=15



http://www.67-72chevytrucks.com/vboa...1&d=1272351834
Posted via Mobile Device

Re: Where's the 3/4 ton love?
 

It is a great look! :cool:
Posted via Mobile Device

Re: Where's the 3/4 ton love?
 

Not my taste, but an interesting set of 8 Luggers:
http://portland.craigslist.org/clk/pts/2740534673.html

Re: Where's the 3/4 ton love?
 

Sorry to anyone here who may be running those but...:barf:

Re: Where's the 3/4 ton love?
 

Hi Im a newbie here but used to old trucks. My 62 K 20 Im rebuilding has 17" Hercules hdt 17's there very old. Looks to be split wheels. All trucks this era seem to be 16.5- 17.5. The wheels are the same color as the truck,and is wearing original paint. It was built in the NewYork plant. Any good sources on some stock 17s? Im running some 16s on my daily W200,( ya its a Dodge, Please go ez on me. ) 7.50-16s Primex trac master. I baught from Nebraska tire.

Re: Where's the 3/4 ton love?
 

Re: Where's the 3/4 ton love?
 

The original wheel tire combo on my half ton was 16" and the wheels on my 1 ton were 16" as well. LOTS of wheels interchange since the 8 lug pattern is the same on Ferd, dodge, chebby and GMC. Most tire shops wont touch split rims so I think your best bet is to shop for some take offs at your local used tire shops.

Re: Where's the 3/4 ton love?
 

here is mine in the process of being restored!!

Re: Where's the 3/4 ton love?
 

I'm really liking your truck.

Also,
I had a Budman t-shirt in the 70's :D
Posted via Mobile Device

Re: Where's the 3/4 ton love?
 

heres an old photo.

Re: Where's the 3/4 ton love?
 

Bud,
Dig the frame color!!!!!! Too many people just do black

Sean
Posted via Mobile Device

Re: Where's the 3/4 ton love?
 

That is awesome! I reeeeeally want to find an old camper for my 63 3/4 ton!

Re: Where's the 3/4 ton love?
 

I love the stock trucks as well. At car shows people really seem to get more nostalgic about the stock set ups. However, unless there is a stock class, the bling usually gets the trophy. Mine is stock except for the edlebrock carb and air cleaner. My rubber is finally starting to crack on the ol' 16.5 steelies, so I have purchased some AR23's to brighten it up a bit. I am keeping all the stock parts that are replaced though and will refurbish and powdercoat at some point when the funds come available.

Re: Where's the 3/4 ton love?
 

Old trucks left original just takes you back in time to a related memory.
The smell. The sound of the straight six. The sound of the rattling gearshift.

For me, the smell, and the rattling 4-speed gearshift takes me back to us grandchildren all cramped in the cab with grandpa and grandma going camping. :)
Posted via Mobile Device

Re: Where's the 3/4 ton love?
 

OK, In about 3 days I will be moving my 66 to the new frame. :metal:
Right now it is a half ton with 8 lug suspension.
However, it is going on a 3/4 ton 1971 frame.
Power steering, hydro-boost brakes, 5 speed overdrive, steel bed floor.
Yes, I am bringing this antique at least into the latter part of the 20th century. :lol:
Here is a before photo...
I LOVE 3/4 ton and bigger GMC trucks

Re: Where's the 3/4 ton love?
 

Got some new shoes. Swapped some tires around and retired my 3 piece rims. My old tires looked like slicks!

Re: Where's the 3/4 ton love?
 

Bought this in calif last year

Re: Where's the 3/4 ton love?
 

Wow yelmer, nice. I want those rims ! lol

Re: Where's the 3/4 ton love?
 

TTT lets keep this going. Im sure there are a few new trucks we can add in!

Re: Where's the 3/4 ton love?
 

[IMG]http://i792.photobucket.com/albums/y...ps3225b010.jpg[/IMG]

Re: Where's the 3/4 ton love?
 

Attachment 1041382

Attachment 1041383

Attachment 1041384
66 3/4 ton 305e v6 I love this old girl! Just wish there was a cheap-easy way to make her have some more top end.

Re: Where's the 3/4 ton love?
 

Want to keep the v6? Swap in a Grand National v6 turbo setup! lol

Re: Where's the 3/4 ton love?
 

Gmcdeadhead,

I put those same wheels on my 66 3/4 ton GMC. On mine, the center caps don't fit the rear hubs -- they aren't deep enough. Did you do anything special to get the rear caps to fit? Thanks.

Rob
Posted via Mobile Device

Re: Where's the 3/4 ton love?
 

How about a thread bump!

Re: Where's the 3/4 ton love?
 

They just look beefier!

Re: Where's the 3/4 ton love?
 

my 66

Re: Where's the 3/4 ton love?
 

my grandpa's truck
C20 with a 327 V8 Engine.