The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What did you do to your truck today.The 3rd chapter (https://67-72chevytrucks.com/vboard/showthread.php?t=773345)

zicc1835 12-21-2019 12:55 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by SoCoC10 (Post 8646277)
Final buff then it’s time for upholstery.

very nice but do somthing to those dirty shoes.......maybe a shoe shine:)

67C10Step 12-21-2019 06:28 PM

Re: What did you do to your truck today.The 3rd chapter
 
No photos but rear diff cleaned up with pressure washer and setting on jack stands in the shop letting the decades old gear oil out.

Will pull the axles and install new bearings and axle seals. Put it all back together, paint it, and put it back in the truck hopefully while I’m off for the holidays.

SoCoC10 12-23-2019 11:27 AM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Cluster restoration done.

Chevys4life 12-23-2019 01:15 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by SoCoC10 (Post 8647654)
Cluster restoration done.

That gauge cluster looks really nice. Did you replace the clear face or just cleaned it up?

Chevys4life 12-23-2019 01:30 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Cleaned out my what is left wood bed so that I can put my new bed cover on it to protect my gas tank relocation and recent brake line replacement. Old man winter is knocking on the door!!!!

zicc1835 12-29-2019 09:58 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
put the frame back in my shop so I can work on finishing plumbing , exhaust and get the motor trans operable next couple months

67C10Step 12-29-2019 11:03 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Got the diff done with some help from my son while he is home from school. Got her of the jack stands and did just a bit of patina cleaning on the front fender. I think she will clean up good enough to drive.
Once I get the driveshaft back in and the rear brakes done I’ll swap her around in the shop and go to work on the front suspension, steering, and brakes.

71threequarterton 12-30-2019 02:12 PM

Re: What did you do to your truck today.The 3rd chapter
 
Actually, Saturday, but just got back online...

Drilled out broken bolt and tapped new hole on upper passenger side that fastens grill assembly in place

Replaced broken turn signal cancelling cam

Repaired broken exhaust hanger

So I got rid of two rattles and the horn works again - all in all, a good day :chevy:

KMC3420 12-30-2019 03:30 PM

Re: What did you do to your truck today.The 3rd chapter
 
2 Attachment(s)
Almost roller status. Plumbing brake hard lines and waiting on parts currently.

67C10Step 12-30-2019 03:38 PM

Re: What did you do to your truck today.The 3rd chapter
 
KMC,
Looking good and I’m happy to see another user of the hillbilly stump jack stand!

KMC3420 12-30-2019 03:42 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by 67C10Step (Post 8651334)
KMC,
Looking good and I’m happy to see another user of the hillbilly stump jack stand!

haha, you bet, solid as a stump. I have the luxury of doing my frame at my brother in laws garage he isn't using. However, dragging all my tools to his place can be a pain, but for a free place to store and work on it, I cant complain. Your truck looks real solid body wise. I don't see much rust! Where did you buy yours from? Mine comes from Conway, and was purchased originally in Pocahontas.

Steeveedee 12-30-2019 04:14 PM

Re: What did you do to your truck today.The 3rd chapter
 
Put in LED stop/tail and backup lights from LMC. Nice and bright!

67C10Step 12-31-2019 09:54 AM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by KMC3420 (Post 8651335)
haha, you bet, solid as a stump. I have the luxury of doing my frame at my brother in laws garage he isn't using. However, dragging all my tools to his place can be a pain, but for a free place to store and work on it, I cant complain. Your truck looks real solid body wise. I don't see much rust! Where did you buy yours from? Mine comes from Conway, and was purchased originally in Pocahontas.

Wish my truck was as solid as it looks in the photos. Rockers bad, couple spots in the floor and drivers can corner. E
What has me most concerned is the rust I see in the kick panels. Scared of what else I’ll find in the cowl area when I tear into it.

My buddy bought this truck in Conway but it was originally purchased right here in Beebe so in a way it’s come back home. This was his fourth truck and after keeping it in a barn for 10-12 years he decided to let it go so he could work on his other projects.

KMC3420 12-31-2019 11:29 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by 67C10Step (Post 8651736)
Wish my truck was as solid as it looks in the photos. Rockers bad, couple spots in the floor and drivers can corner. E
What has me most concerned is the rust I see in the kick panels. Scared of what else I’ll find in the cowl area when I tear into it.

My buddy bought this truck in Conway but it was originally purchased right here in Beebe so in a way it’s come back home. This was his fourth truck and after keeping it in a barn for 10-12 years he decided to let it go so he could work on his other projects.

That’s pretty neat. It’s coming full circle for your truck. Rust is a given with these old trucks but I know you sill get it back on the road. Keep at it.

Willys_MB 01-03-2020 03:50 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Re-etched, filled, and polished up my old shift knob!

my04 01-03-2020 04:30 PM

Re: What did you do to your truck today.The 3rd chapter
 
2 Attachment(s)
Painted Mile Marker hub dials. Before and after.

DeadheadNM 01-03-2020 06:53 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Added an old school USA made lace up steering wheel cover

ApacheNick 01-05-2020 08:52 PM

Re: What did you do to your truck today.The 3rd chapter
 
Replaced the squeaky heater motor and gave it a bath.

allchevy58 01-05-2020 11:15 PM

Re: What did you do to your truck today.The 3rd chapter
 
Had a new A/C compressor put on and recharged on Friday. Old one locked up last summer. Nice to have A/C again.

71threequarterton 01-07-2020 12:50 PM

Re: What did you do to your truck today.The 3rd chapter
 
Finally got the darn headlights working again. I've been watching a lot of videos trying to psyche myself up for digging into my electrical and was getting ready to install a new front light harness but a buddy of mine showed me what the problem was. He actually pulled each wire out of the headlight sockets and cleaned those up and we cleaned up some ground connections. I also put in a set of PIAA super bass horns and those sound really good. Found a set of wire cutters rusted shut inside my front fender :lol: surprised PO wasn't missing those. I know I would have been... :chevy:

SRU1436 01-18-2020 03:16 PM

Re: What did you do to your truck today.The 3rd chapter
 
Got new exhaust and mufflers from the manifolds back.

Already Gone 01-18-2020 05:21 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by allchevy58 (Post 8655254)
Had a new A/C compressor put on and recharged on Friday. Old one locked up last summer. Nice to have A/C again.

Did you put a rebuilt original style compressor or go to anew style compressor.

67C10Step 01-18-2020 07:52 PM

Re: What did you do to your truck today.The 3rd chapter
 
Took my exterior door handles off and installed the push buttons, springs, and restrainers from a set of driver quality units from a later model.
Installed new shocks on the rear to match up with the 4” drop and shock relocation.
Waiting on parking brake springs to finish up all new rear brakes.

allchevy58 01-18-2020 11:01 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by Already Gone (Post 8661812)
Did you put a rebuilt original style compressor or go to anew style compressor.

Brand new original style, new dryer and refilled with R134.

KMC3420 01-18-2020 11:24 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Finished my rear axle brake lines, small steps.


All times are GMT -4. The time now is 06:39 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com