Re: How about some pics of bagged C-10's
 

i have always loved those tpi, i had one once and had it chrome plated but never got to run it... looks great

Re: How about some pics of bagged C-10's
 

Just like everyone else heres my work in progress... Shes a 72 C10, bagged with CPP tubular front control arms, 22x8.5 up front and 22x10 out back. This is where she should sit fully dumped.

Re: How about some pics of bagged C-10's
 

looks good. Is that a repop bedside? If so, how's the fit for you? I've heard they're pretty good.

Re: How about some pics of bagged C-10's
 

Yes its a repop, got the sides front panel and tailgate from LMC as for the fit its not to bad... I made my own bed floor so i could bring the gas tank up, hide the tanks and compresor, and allow the pot to not hit the bed floor. Right now the front panels a little low on the pass side by about 1/4" and the tailgate sits maybe an 1/8 to 1/16" to high but im happy, when im ready ill start messing with fitment. And thanks for the compliment!

Re: How about some pics of bagged C-10's
 

nice truck are those wheels from raceline? how much did you pay for them?

Re: How about some pics of bagged C-10's
 

PM'd u... thanks man

Re: How about some pics of bagged C-10's
 

x2... racelines??

Re: How about some pics of bagged C-10's
 

VA72C10 Here a pic of the bed frame ....

Re: How about some pics of bagged C-10's
 

207 speedsters raceline

Re: How about some pics of bagged C-10's
 

doh... i just noticed your sig;)

Re: How about some pics of bagged C-10's
 

ha ha no prob man!

Re: How about some pics of bagged C-10's
 

Great looking truck!

Re: How about some pics of bagged C-10's
 

If you weren't running the bags on the trailing arms would there be a reason to keep them?

Couldn't you just run the 3-link and do a bag over axle and eliminate the trailing arms?

Just thinkin here because we're getting ready to do my sons and am trying to decide if a 3 link or 4 link is better.

Re: How about some pics of bagged C-10's
 

When you put the air bag over the axle your ride isn't as good. Plus when mounted on the trailing arm you will get more lift.
Nice job Bill :metal:

Re: How about some pics of bagged C-10's
 

Thanks for the reply. With the bags on the trailing arms can you still pull a payload and lay LOW?

Re: How about some pics of bagged C-10's
 

As long as your lower arms are strong enough. Like these I installed.

http://belair.smugmug.com/Other/Spor...52_bJGXe-M.jpg

Re: How about some pics of bagged C-10's
 

you can still lay frame in the rear with this set up right?

Re: How about some pics of bagged C-10's
 

never mind i just answered my own question.. i guess it helps if you look at the pages before this one.

Re: How about some pics of bagged C-10's
 

Mine is starting to get there

Re: How about some pics of bagged C-10's
 

I wish I was that far along ..... still got a long ways to go . Jason what bags are you using on your truck ?

Re: How about some pics of bagged C-10's
 

Fire stones sleeve and slams up front .

Re: How about some pics of bagged C-10's
 

I was thinking about the Air lift D2600 for the front and then the sleeves on the rear when I get that far .... Think those will work on the front , I found a place on E-bay that sells them for 95.00 pair with free shipping , seems reasonable

Re: How about some pics of bagged C-10's
 

Check out Contitech bags. Stronger than Firestone and cheaper.
http://www.macsspring.com/contitechair.aspx

Re: How about some pics of bagged C-10's
 

doms are good, and the cheapest ive seen. havent seen a bad review yet. i got em on all 4 corners but havent hit the road yet.

Re: How about some pics of bagged C-10's
 

I was thinking about those for the front of my truck along with the dropmember .... Looks like they should work , I have some conti-tecs but they do not ine up with the holes in the upper mounts and I dont want to start hacking on it.