The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 48 of 199 « First 384344454647 48 49505152535898148 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   projects and builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=197)
-   -   Project Vitamin C-10 (https://67-72chevytrucks.com/vboard/showthread.php?t=248460)

MacAttack 05-21-2009 10:00 AM
Re: My 1965 build thread
 
Quote:
Originally Posted by 4dranch (Post 3320258)
I would come help you Alan, but I can"t work with white cotton gloves on...
:lol: Oh No! :lol: Now that's some funny chit right there....;)

joe231 05-21-2009 10:19 AM
Re: My 1965 build thread
 
maybe the angle of the pic, but it looks like you wedge is turned 90 degrees from where it should be....the studs should be horizontal
http://i606.photobucket.com/albums/t...s/DSC09768.jpg
like this one
http://i255.photobucket.com/albums/h...akebooster.jpg

or is it the vertical style bracket????

Alan's Classic 05-21-2009 10:21 AM
Re: My 1965 build thread
 
Quote:
Originally Posted by 4dranch (Post 3320258)
I would come help you Alan, but I can"t work with white cotton gloves on...
How can you do all that work in one day and not get one finger print, smudge, grease spot or anything anywhere? Hell I can't open my beer without them little grease finger prints on the sides of the can. :lol:

Is the frame and the top of the cab the same color?

I'm amazed:metal: Very sharp work
It's called an operating room. :haha: The camera hides alot of stuff. Yes the frame and top of the cab is the same color. Thanks David.

Quote:
Originally Posted by jason65 (Post 3320277)
Looks awsome! Are you gonna put a grey stripe down the side between the trim?
Thanks Jason, yes I plan on painting the area in the mouldings the same as the top.

Quote:
Originally Posted by scotts62 (Post 3320313)
Man Alan thats looking good!! At the rate you going on that you can drive it to our meet! :lol:

The firewall to engine clearance is about what i have on mine too. I know i would like mine to be closer but oh well.
Thanks Scott, it's all labor right now. I need to sell some stuff so I can afford more parts. But I have plenty to keep me busy for now.

Quote:
Originally Posted by MacAttack (Post 3320497)
:lol: Oh No! :lol: Now that's some funny chit right there....;)
No respect :haha: ;)

joe231 05-21-2009 10:25 AM
Re: My 1965 build thread
 
oops, I meant the bolts should be horizontal....

damn you no editing after a few minutes (shakes fist at the screen) :devil:

protrash64 05-21-2009 10:47 AM
Re: My 1965 build thread
 
Alan, you have the engine mounted in the front holes thus the clearance behind the engine. Pointing it out in case you want to change it, but it works for me. You mite run out of space at the radiator depending on your mounting location. I believe the factory had two ways of mounting the radator; mine is against the core support so I have no issues. Heads up!!

joe231 05-21-2009 11:01 AM
Re: My 1965 build thread
 
I tried mount our towers in the forward holes, but would have had to drill new holes in the cross member for it to work....is that how you did it Jeff?

protrash64 05-21-2009 11:13 AM
Re: My 1965 build thread
 
I dont remember Joe...too long ago. I know I slotted the holes a bit for some adjustment and I was careful to make sure the holes for the motor mount bolts stayed in the same relative width. Im wondering if I flipped them from side to side????? I'll have to look.:smoke:

joe231 05-21-2009 11:14 AM
Re: My 1965 build thread
 
I tried the side to side thing, angle was wrong I believe....

protrash64 05-21-2009 11:21 AM
Re: My 1965 build thread
 
Quote:
Originally Posted by joe231 (Post 3320610)
I tried the side to side thing, angle was wrong I believe....
:confused:....I cant see the frame to be sure, Joe. I know I wouldnt have been afraid to drill if it needed it:lol:. My truck is too low to get under it and look up into the X-member to know for sure. I'll find out eventually when I pull the engine for upgrades.

joe231 05-21-2009 11:23 AM
Re: My 1965 build thread
 
:haha:

Ain't no thang!!
i was just wondering..

jgh64pkup 05-21-2009 12:19 PM
Re: My 1965 build thread
 
looks good alan

kizer 05-21-2009 05:09 PM
Re: My 1965 build thread
 
Man that does look nice. I remembered reading somewhere that the bumpers would not be chrome. Are they going to be orange or the same color as the frame/top of cab?

ruffrida2005 05-21-2009 07:27 PM
Re: My 1965 build thread
 
Can I come and work on someones truck I dont have any money to work on mine and i want to turn some wrenches. Help a fellow trucker out, and my wife and sons are being annoying. but I love them.

Alan's Classic 05-21-2009 07:39 PM
Re: My 1965 build thread
 
Quote:
Originally Posted by joe231 (Post 3320531)
maybe the angle of the pic, but it looks like you wedge is turned 90 degrees from where it should be....the studs should be horizontal
http://i606.photobucket.com/albums/t...s/DSC09768.jpg
like this one
http://i255.photobucket.com/albums/h...akebooster.jpg

or is it the vertical style bracket????

The one you posted looks different than mine. Here is the only pic I have of that area. The point is pointing up. Sorry for the small pic

http://i369.photobucket.com/albums/o...truck054-1.jpg

Quote:
Originally Posted by protrash64 (Post 3320575)
Alan, you have the engine mounted in the front holes thus the clearance behind the engine. Pointing it out in case you want to change it, but it works for me. You mite run out of space at the radiator depending on your mounting location. I believe the factory had two ways of mounting the radator; mine is against the core support so I have no issues. Heads up!!
The towers are from CPP and that was the only place they would fall in and line up. I'll mock everything up like the radiator and fan and see where I'm at. It will be a while cause I don't have the parts yet.

Quote:
Originally Posted by jgh64pkup (Post 3320682)
looks good alan
:thumbs:

Quote:
Originally Posted by kizer (Post 3321082)
Man that does look nice. I remembered reading somewhere that the bumpers would not be chrome. Are they going to be orange or the same color as the frame/top of cab?
Thanks man!! The bumpers and grill will be the gray color.

Today I sanded down the inner fenders, headlight mount panel, cowl side pieces and glove box door. I wasn't happy with the way they turned out so hopefully I will get them painted tomorrow.

Alan's Classic 05-21-2009 07:40 PM
Re: My 1965 build thread
 
Quote:
Originally Posted by ruffrida2005 (Post 3321230)
Can I come and work on someones truck I dont have any money to work on mine and i want to turn some wrenches. Help a fellow trucker out, and my wife and sons are being annoying. but I love them.
Come on. I don't have any cash either, but there is plenty of work to do.:lol:

ruffrida2005 05-21-2009 07:56 PM
Re: My 1965 build thread
 
What radiator and fan are you running. My motor is pushed up because of the SD raised crossmember. so I just need a little help on it!

Alan's Classic 05-21-2009 08:00 PM
Re: My 1965 build thread
 
Quote:
Originally Posted by ruffrida2005 (Post 3321276)
What radiator and fan are you running. My motor is pushed up because of the SD raised crossmember. so I just need a little help on it!
Not sure yet. I'm going to go back thru ChiefRockas post about radiators when the time comes.

joe231 05-21-2009 08:26 PM
Re: My 1965 build thread
 
yeah that pic sucks...
how about a new pic with it painted and the wedge off:devil:

Strodder 05-21-2009 10:06 PM
Re: My 1965 build thread
 
Quote:
Originally Posted by joe231 (Post 3321308)
yeah that pic sucks...
how about a new pic with it painted and the wedge off:devil:
Hey Joe, are you trying to hypnotize us with your Avatar? :lol:

shrunken66stroker 05-21-2009 10:11 PM
Re: My 1965 build thread
 
Quote:
Originally Posted by Strodder (Post 3321446)
Hey Joe, are you trying to hypnotize us with your Avatar? :lol:
That's how he got that 350 for free. He invited his neighbor over to see his new avatar and snuck out to wheel it over.

scotts62 05-21-2009 10:11 PM
Re: My 1965 build thread
 
Quote:
Originally Posted by Strodder (Post 3321446)
Hey Joe, are you trying to hypnotize us with your Avatar? :lol:
No kidding that tripped me out when i saw it.. its like who the!!?? Oh nevermind its Joe :lol: :lol:

Sorry Alan about the hi-jack..

Strodder 05-21-2009 10:13 PM
Re: My 1965 build thread
 
Quote:
Originally Posted by scotts62 (Post 3321453)
No kidding that tripped me out when i saw it.. its like who the!!?? Oh nevermind its Joe :lol: :lol:

Sorry Alan about the hi-jack..
NO YOUR NOT! :lol::lol:

joe231 05-21-2009 10:14 PM
Re: My 1965 build thread
 
Quote:
Originally Posted by Strodder (Post 3321446)
Hey Joe, are you trying to hypnotize us with your Avatar? :lol:

yes...you will send me all your money and good parts

Quote:
Originally Posted by shrunken66stroker (Post 3321452)
That's how he got that 350 for free. He invited his neighbor over to see his new avatar and snuck out to wheel it over.
shhh...don't give away all my secrets:sumo:

Quote:
Originally Posted by scotts62 (Post 3321453)
No kidding that tripped me out when i saw it.. its like who the!!?? Oh nevermind its Joe :lol: :lol:

Sorry Alan about the hi-jack..
:lol:

your getting good at 'jackin' :haha: :exit:

jgh64pkup 05-21-2009 10:18 PM
Re: My 1965 build thread
 
at least its better than the steak one
it still makes me hungry though

joe231 05-21-2009 10:26 PM
Re: My 1965 build thread
 
dang-it..
I did some testing....
it works on some people and they do what I tell them
but it just makes most people hungry :banghead:


All times are GMT -4. The time now is 06:13 AM.
Page 48 of 199 « First 384344454647 48 49505152535898148 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com