The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   FAQ Truck Tech (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=92)
-   -   SoCal checkin' in (https://67-72chevytrucks.com/vboard/showthread.php?t=655965)

VWNate1 11-12-2012 10:30 AM

Re : Helping Hands
 
Quote:

Originally Posted by hopped up (Post 5693773)
You guys are too cool. I know vdog would and has been helping me out . And Nate and Dano are cool guys too , but the others that i havent met i appreciate it alot.
Posted via Mobile Device

We're all in this to - gether , not everyone grasps this simple concept but the good people here do .

VDOG 11-12-2012 08:47 PM

Re: SoCal checkin' in
 
Quote:

Originally Posted by ItsRandy (Post 5698045)
There are a pair of early big block motor mounts in a '71 3/4 ton at the pick a part on 6th street in San Bernardino and a hydro boost on a later model 1 ton if anybody is interested. The motor is still in the truck.

I've heard nothing but good things about the Hydro Boost brakes.

VWNate1 11-13-2012 09:14 AM

Re : GM Hydroboost Brakes
 
O.K. , we had these on nearly our entire Fleet and it was not so good ~ whenever the V-Belt failed , you lost brakes and steering both at the same time , usually the belt failed when some idiot cut you off and you braked hard .

Just beware that all is not roses with this system .

I hope to never had any vehicle so equipped .

xxlf250 11-15-2012 11:55 AM

Re: SoCal checkin' in
 
checking in from Indio,.....Palm Springs area

got a k5 and a 65 short bed that are never ending projects, just wanted to say What's up....:ito:

leddzepp 11-15-2012 12:09 PM

Re: SoCal checkin' in
 
Quote:

Originally Posted by ItsRandy (Post 5698045)
There are a pair of early big block motor mounts in a '71 3/4 ton at the pick a part on 6th street in San Bernardino and a hydro boost on a later model 1 ton if anybody is interested. The motor is still in the truck.

It also has a rear sport bumper on it....too bad they jacked it up and have all the weight resting on the bumper

ItsRandy 11-16-2012 12:33 AM

Re: SoCal checkin' in
 
Quote:

Originally Posted by leddzepp (Post 5704010)
It also has a rear sport bumper on it....too bad they jacked it up and have all the weight resting on the bumper

Ahhhhh...You saw that too. I was looking for a glove box latch when I saw it, I only had a phillips screwdriver with me.

Did you get your truck back yet?

VDOG 11-16-2012 03:47 PM

Re: SoCal checkin' in
 
Quote:

Originally Posted by xxlf250 (Post 5703993)
checking in from Indio,.....Palm Springs area

got a k5 and a 65 short bed that are never ending projects, just wanted to say What's up....:ito:


Welcome to the SoCal page. Feel free to ask question, drive down to a few meets. Or host one if we can get enough of us to drive down to your area.

VDOG 11-17-2012 02:35 PM

Re: SoCal checkin' in
 
1 Attachment(s)
Slight progress. back from powder coating.

Lee H 11-17-2012 02:50 PM

Re: SoCal checkin' in
 
Nice, they sure are pretty when fresh!

hopped up 11-17-2012 03:29 PM

Re: SoCal checkin' in
 
Lookin good vdog!!! Who's your powder coater?
Posted via Mobile Device

VDOG 11-17-2012 10:26 PM

Re: SoCal checkin' in
 
Quote:

Originally Posted by Lee H (Post 5707534)
Nice, they sure are pretty when fresh!

LOL!!! Thanks Lee, I see some nice seats in your avatar.

Quote:

Originally Posted by hopped up (Post 5707584)
Lookin good vdog!!! Who's your powder coater?
Posted via Mobile Device

I used a place near me in Gardena. It was reasonable, just took a bit longer than I wanted.

leddzepp 11-18-2012 01:30 AM

Re: SoCal checkin' in
 
Quote:

Originally Posted by ItsRandy (Post 5705137)
Ahhhhh...You saw that too. I was looking for a glove box latch when I saw it, I only had a phillips screwdriver with me.

Did you get your truck back yet?

No, they probably won't finish until the end of the year. I am not worried, they are doing a fantastic job so far. Did you end up finding a glovebox latch? If not, I have several and can drop one off next time I am at my in-laws house.
Posted via Mobile Device

VDOG 11-18-2012 04:40 PM

Re: SoCal checkin' in
 
Ditto to what Led said!!! I got one sitting around here also.

ItsRandy 11-18-2012 10:37 PM

Re: SoCal checkin' in
 
Quote:

Originally Posted by leddzepp (Post 5708487)
Did you end up finding a glove box latch?
Posted via Mobile Device

Thanks Scott and Vince, I found the latch the day I was at Pick-a-Part.

I was driving my truck today and smoke began coming through the dash speaker grill. There was quite a bit of smoke, it started to fill the cab. Because of where it was coming from I thought it was coming from my radio so I shut the radio off, pulled over as soon as I could and the smoke slowed then stopped. When I got home I pulled the radio, no sign of any heat so I pulled the glove box to get a better look at the situation, no melted electronics, wires or anything else. I opened the radio, no sign of heat. I looked over every square inch under the dash, no sign of heat or damage of any kind AND everything, EVERYTHING still works, the radio was still playing when I shut it off. Everything in my truck is new, wiring harness, electronics...you name it, it's new. What do you guys think?

VDOG 11-19-2012 01:39 PM

Re: SoCal checkin' in
 
Quote:

Originally Posted by ItsRandy (Post 5709941)
Thanks Scott and Vince, I found the latch the day I was at Pick-a-Part.

I was driving my truck today and smoke began coming through the dash speaker grill. There was quite a bit of smoke, What do you guys think?


Did it smell like wires were burning or something else?

xxlf250 11-19-2012 03:15 PM

Re: SoCal checkin' in
 
Quote:

Originally Posted by VDOG (Post 5706028)
Welcome to the SoCal page. Feel free to ask question, drive down to a few meets. Or host one if we can get enough of us to drive down to your area.

I will thank you, Just got back from the good guys in az with some of the guys from the c10 club, so after that I will be around, again thank you

VDOG 11-19-2012 07:03 PM

Re: SoCal checkin' in
 
Quote:

Originally Posted by xxlf250 (Post 5711098)
I will thank you, Just got back from the good guys in az with some of the guys from the c10 club, so after that I will be around, again thank you

How was it?

xxlf250 11-19-2012 07:46 PM

Re: SoCal checkin' in
 
I'll get some pics posted tonight.

ItsRandy 11-19-2012 09:42 PM

Re: SoCal checkin' in
 
Quote:

Originally Posted by VDOG (Post 5710924)
Did it smell like wires were burning or something else?

Smelled like burning plastic/electronics. Makes me uncomfortable to not be able to find the cause. Talked to the radio manufacturer today, they say "not coming from the radio" but that I should bench test the radio to be sure. I had lost the left front speaker channel a week or so ago and the radio manufacturer says it may be the "pigtail" (wiring harness) and they will send me a new one. The smoke problem cropped up after I lost the channel.

VDOG 11-23-2012 07:59 PM

Re: SoCal checkin' in
 
Anybody else go to the half price sale at Pick a Part today?
Thinking about pulling a trailing arm setup. Unless someone has one just sitting around. LOL

JOHNORO 11-23-2012 08:51 PM

Re: SoCal checkin' in
 
Quote:

Originally Posted by VDOG (Post 5718824)
Anybody else go to the half price sale at Pick a Part today?
Thinking about pulling a trailing arm setup. Unless someone has one just sitting around. LOL

I stopped by early at the one in Buena Park,
The Line to pay was 45 min long :confused:
And people were parking across the street !
I turned around inbthe parking lot and the took 20 min. Never again :lol:
Posted via Mobile Device

VWNate1 11-23-2012 08:52 PM

Re : Pick-A-Part 50 % OFF Sale
 
Not this year as it's always a real zoo .

I have been meaning to ask : are C/10 & C/20 trailing arms the same ? .

I suppose I shoulda gone and looked for a good cab , I could either use it or cut it up into repair panels .

Instead I went to Kaiser for pre surgery workups (they finally gave me a Surgery date of 12/6) then passed out in my recliner reading the new Tom Wolfe book before getting off my duff and de rusting the gas tank in my Metropolitan Nash FHC....

VDOG 11-25-2012 12:55 AM

Re: Re : Pick-A-Part 50 % OFF Sale
 
Quote:

Originally Posted by VWNate1 (Post 5718954)
Not this year as it's always a real zoo .
Instead I went to Kaiser for pre surgery workups (they finally gave me a Surgery date of 12/6) then passed out in my recliner reading the new Tom Wolfe book before getting off my duff and de rusting the gas tank in my Metropolitan Nash FHC....


Nate looks like your going to be coaching from the sidelines for awhile. Its all good, get better youngman. Dont worry, we will still have projects for you to help us out with. Besides im going to have you slide under my truck to change my trailing arms. You know experience before youth. LOL
Take care.



Quote:

Originally Posted by johnoro
I stopped by early at the one in Buena Park,
The Line to pay was 45 min long

John you should have came to the one in Wilmington, it was empty.
I plan on going to the Long Beach Swapmeet tomorrow. The wife is going to kill me. LOL

JOHNORO 11-28-2012 11:26 PM

Re: Re : Pick-A-Part 50 % OFF Sale
 
Quote:

Originally Posted by VDOG (Post 5721175)
John you should have came to the one in Wilmington, it was empty.
I plan on going to the Long Beach Swap meet tomorrow. The wife is going to kill me. LOL

I went to Vets stadium for a little while, place was a ghost town for vendors
but some kool cars up in the car corral..

Chevrolado 11-29-2012 12:38 PM

Re: SoCal checkin' in
 
Checking in from West Torrance/Redondo Beach area in the South Bay. :D Great to see so many active socal users here!

My rig is a '77 K10 Silverado. See pic in my sig. :D

Does anyone ever organize any meetups or group activities around here? That would be pretty fun to meet with other truck owners.


All times are GMT -4. The time now is 01:13 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com