The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 49 of 124 « First 394445464748 49 50515253545999 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)
-   -   How about some pics of bagged C-10's (https://67-72chevytrucks.com/vboard/showthread.php?t=255929)

FnLow69 10-30-2010 12:57 AM
Re: How about some pics of bagged C-10's
 
^Now thats badass man, last picture is awesome as well!!!

NZSquare 10-30-2010 01:01 AM
Re: How about some pics of bagged C-10's
 
damn that thing is slick, so simple but breathtaking. I love the choice in wheels to, the more trucks I see with big chrome rims the less I like them.

67cheby 10-30-2010 09:27 AM
Re: How about some pics of bagged C-10's
 
very nice

Strodder 10-30-2010 08:09 PM
Re: How about some pics of bagged C-10's
 
:agree:

61_FL_Apache 11-12-2010 11:57 AM
Re: How about some pics of bagged C-10's
 
nice pics

68 Quad C10 11-12-2010 01:11 PM
Re: How about some pics of bagged C-10's
 
i really like the last 2 pics very nice!

bcutt 11-14-2010 10:05 AM
Re: How about some pics of bagged C-10's
 
Quote:
Originally Posted by Lightnin2699 (Post 4226385)
Just like everyone else heres my work in progress... Shes a 72 C10, bagged with CPP tubular front control arms, 22x8.5 up front and 22x10 out back. This is where she should sit fully dumped.

what's the back spacing on those wheels? They look great.

fabguy 11-15-2010 12:38 PM
Re: How about some pics of bagged C-10's
 
Quote:
Originally Posted by superflysteiny (Post 4177574)
Fabguy you will have to change the a arms and put an 8 inch notch to get the body on the ground. You may have to put a 10 inch notch in the rear. No matter what you will have to raise the floor of the bed. You can do that by raising the whole floor or you can raise the center. Hope this helps.
Ok thanks, What A arms do I get? Here is a pic of the frame, I C-notched the rear 2-1/2" and the rear bumper is going to be about 3-1/2" from the ground. I don't have anything in the front yet as I am waiting on my bags & brackets to show up but I did install 2-1/2" drop spindles. I went with Dominator 2600 bags and a bracket kit from suicidoors.com. Once the bags are installed then I will see how it lays and if I need to cut down the factory rubber stops or not. I need to get the front 2" lower to have the 58 body on the ground. Also, do new Arms help with the track width? I need 1" more total. And do I need to get longer brake lines?
http://www.henderson6.com/images/58frame.jpg

PBFAB.COM 11-15-2010 01:09 PM
Re: How about some pics of bagged C-10's
 
Quote:
Originally Posted by fabguy (Post 4295882)
Ok thanks, What A arms do I get? Here is a pic of the frame, I C-notched the rear 2-1/2" and the rear bumper is going to be about 3-1/2" from the ground. I don't have anything in the front yet as I am waiting on my bags & brackets to show up but I did install 2-1/2" drop spindles. I went with Dominator 2600 bags and a bracket kit from suicidoors.com. Once the bags are installed then I will see how it lays and if I need to cut down the factory rubber stops or not. I need to get the front 2" lower to have the 58 body on the ground. Also, do new Arms help with the track width? I need 1" more total. And do I need to get longer brake lines?
http://www.henderson6.com/images/58frame.jpg
If you are looking for a set of tubular arms that will narrow your track 1" per side, we got ya covered. We build them in factory length, narrowed, or lengthened. PM me if you are interested in a pricing/availability on a set.

Nate

fabguy 11-15-2010 02:14 PM
Re: How about some pics of bagged C-10's
 
Quote:
Originally Posted by porterbuilt (Post 4295929)
If you are looking for a set of tubular arms that will narrow your track 1" per side, we got ya covered. We build them in factory length, narrowed, or lengthened. PM me if you are interested in a pricing/availability on a set.

Nate
Thanks Nate, It was a pleasure talking with you a little bit ago. Like I said I will be calling you for those A arms.
Thanks Again

kart34 11-19-2010 10:35 PM
Re: How about some pics of bagged C-10's
 
Right on !!! Gotta get my longbox done Super job

Mkcustums 11-19-2010 11:11 PM
Re: How about some pics of bagged C-10's
 
1 Attachment(s)
Pretty cool pic, hope it's not a repost. I have looked at all the pages, just not recently. Anyway...

Mkcustums 11-19-2010 11:31 PM
Re: How about some pics of bagged C-10's
 
5 Attachment(s)
more...

1sik52 11-22-2010 04:31 AM
Re: How about some pics of bagged C-10's
 
Quote:
Originally Posted by Mkcustums (Post 4303992)
Pretty cool pic, hope it's not a repost. I have looked at all the pages, just not recently. Anyway...
That's my 52 and my buddies 81.
Posted via Mobile Device

justpball 11-22-2010 07:53 AM
Re: How about some pics of bagged C-10's
 
What up greg, great pics!
Posted via Mobile Device

Bowtie337 11-30-2010 06:05 PM
Re: How about some pics of bagged C-10's
 
http://i600.photobucket.com/albums/t...B/ae244f88.jpg
http://i600.photobucket.com/albums/t...B/494d4c00.jpg
http://i600.photobucket.com/albums/t...B/50155445.jpg
http://i600.photobucket.com/albums/t...B/a99e82fe.jpg
Not mine yet, but I plan on buying it. Keeping original look but making it lay frame! I'm 16 and this will be my first truck! :metal:
Posted via Mobile Device

VA72C10 11-30-2010 06:20 PM
Re: How about some pics of bagged C-10's
 
Quote:
Originally Posted by Bowtie337 (Post 4323097)
Not mine yet, but I plan on buying it. Keeping original look but making it lay frame! I'm 16 and this will be my first truck! :metal:
That truck would look SWEET laying frame...hope you get it!

Bowtie337 11-30-2010 06:31 PM
Re: How about some pics of bagged C-10's
 
Quote:
Originally Posted by VA72C10 (Post 4323123)
That truck would look SWEET laying frame...hope you get it!
Thats what i was thinking man, but im going to change my mirrors. So when i pull up to a red light and the girl next to me thinks im in my grandfathers hand me down truck i will flip a switch and lay that B****h out:devil:
I want to paint it a darker green like emerald with a metallic flake.

SBCustoms 12-05-2010 12:31 PM
Re: How about some pics of bagged C-10's
 
3 Attachment(s)
my project truck.... still lot left to do but gettin there

SBCustoms 12-05-2010 12:37 PM
Re: How about some pics of bagged C-10's
 
This is a good looking truck. are you from Knox TN?? i noticed the plate.

Pop's C-10 12-05-2010 12:49 PM
Re: How about some pics of bagged C-10's
 
1 Attachment(s)
I love to see sqaures with all tha trim layed out..

scotts62 12-05-2010 07:54 PM
Re: How about some pics of bagged C-10's
 
Yeah that one is pretty slick :metal:

NZSquare 12-06-2010 03:37 AM
Re: How about some pics of bagged C-10's
 
Heres the latest pic of mine, the whitewalls parted company about 10 minutes after this shot, some fandangle rubberised paint from iceland, sticks very well to itself, not so good to the tyre

http://67-72chevytrucks.com/gallery/data/500/sled.jpg

blazed89 12-08-2010 03:20 AM
Re: How about some pics of bagged C-10's
 
"http://i1183.photobucket.com/albums/...2_521035_n.jpg"
"http://i1183.photobucket.com/albums/..._4906032_n.jpg"

edflores 12-08-2010 03:41 AM
Re: How about some pics of bagged C-10's
 
Bad ASSSS
Specs? What wheels are those?


All times are GMT -4. The time now is 04:16 AM.
Page 49 of 124 « First 394445464748 49 50515253545999 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com