The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 5 of 6

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)

- - CA Parting out 84 Chevy 3/4 ton 4x4* (https://67-72chevytrucks.com/vboard/showthread.php?t=376347)

chevyrestoguy

01-29-2010 10:13 AM

Re: Parting out 84 Chevy 3/4 ton 4x4*

Quote:

--------------------------------------------------------------------------------

Quote:
Originally Posted by chevyrestoguy
Do you have the upper metal shroud that goes on top of the radiator and bolts to both the core support and the shroud? Mine's an '83 1/2 ton, gas engine, if that makes any difference....

Also, did you ever sell the Q-Jet?

Alex

Yes, Mine is for a 4 row radiator. I did not sell the carb yet because I'm still using it to test engines. Let me know what radiator you have and the measurement of your metal piece. Thanks, Ray

Ray-
I'll check the radiator size tomorrow and I'll let you know if I need it or not. I'm pretty certain that it's a 4-core, but I'm out of town right now and can't physically check it until tomorrow.

It sounds like you're using the carb right now, but are you going to be at a point of selling it anytime in the future?

Thanks,
Alex

KrazyRay

01-29-2010 11:35 PM

Re: Parting out 84 Chevy 3/4 ton 4x4*

Quote:

Originally Posted by chevyrestoguy (Post 3765834)

Alex, I don't know for sure. My buddy thinks I should hold on to it because its hard to find a reliable carb for testing all of the engines that come through here.
Thanks, Ray

bikes&bowties

01-31-2010 01:18 AM

Re: Parting out 84 Chevy 3/4 ton 4x4*

Does the cover look like the opening below? And from the center of the bolt holes are 5.5 inches and 4.25 inches.

http://i254.photobucket.com/albums/h...a/ptocover.jpg

Kenbo-Slice

01-31-2010 06:52 PM

Re: Parting out 84 Chevy 3/4 ton 4x4*

Does it have good fuel tank support assemblies? (the ones that bolt onto the side of the frame) If so, please PM me a price including shipping to 12569. Thank you!

KrazyRay

01-31-2010 07:25 PM

Re: Parting out 84 Chevy 3/4 ton 4x4*

1 Attachment(s)

Quote:

Originally Posted by Kenbo-Slice (Post 3771086)

Does it have good fuel tank support assemblies? (the ones that bolt onto the side of the frame) If so, please PM me a price including shipping to 12569. Thank you!

pm sent, pic of many brackets

bikes&bowties

01-31-2010 10:05 PM

Re: Parting out 84 Chevy 3/4 ton 4x4*

Quote:

Originally Posted by bikes&bowties (Post 3769836)

Does the cover look like the opening below? And from the center of the bolt holes are 5.5 inches and 4.25 inches.

http://i254.photobucket.com/albums/h...a/ptocover.jpg

Will the NP203 cover work? If so I'll take it. PM me

DBLSPRT68

02-02-2010 10:56 PM

Re: Parting out 84 Chevy 3/4 ton 4x4

Quote:

Originally Posted by KrazyRay (Post 3676743)

The carb is a Q jet style. Its relatively new but the PO said that it was too big for a stock 350. I think he said it was 800 but I doubt it is that big. Any ideas to find out size? I will do $100 shipped on that carb and I will verify the running condition when I start up the engine. Thanks, Ray

Ray, did you ever get it started and running? Still interested in the carb. Let me know. David

KrazyRay

02-03-2010 01:31 AM

Re: Parting out 84 Chevy 3/4 ton 4x4

Quote:

Originally Posted by DBLSPRT68 (Post 3776444)

Ray, did you ever get it started and running? Still interested in the carb. Let me know. David

I'm still using the carb. I should probably sell it because I can use the money right now. I better check to see who wanted the carb first as per the site rules. Thanks, Ray

DBLSPRT68

02-05-2010 10:05 PM

Re: Parting out 84 Chevy 3/4 ton 4x4*

Ray, just sent you Paypal cash for the Q-jet. David

mfolds442

02-07-2010 07:04 PM

Re: Parting out 84 Chevy 3/4 ton 4x4*

how much for the clock shipped to 07722?

KrazyRay

02-08-2010 02:03 AM

Re: Parting out 84 Chevy 3/4 ton 4x4*

Quote:

Originally Posted by mfolds442 (Post 3786597)

how much for the clock shipped to 07722?

I can do $18 shipped. Thanks, Ray

Jim_PA

02-09-2010 01:19 AM

Re: Parting out 84 Chevy 3/4 ton 4x4*

Did the carb go with the motor? That's a pretty nice one!

KrazyRay

02-09-2010 10:43 PM

Re: Parting out 84 Chevy 3/4 ton 4x4*

Quote:

Originally Posted by Jim_PA (Post 3789499)

Did the carb go with the motor? That's a pretty nice one!

I sold the carb to a board member. I think I let it go too cheap.

CHROMAHOLIC

02-09-2010 11:29 PM

Re: Parting out 84 Chevy 3/4 ton 4x4*

Ray...still looking for window defrost vents for a 77 if you get to checking your other cabs or anybody else that might have a set in good shape...thanks, Jim

Jim_PA

02-10-2010 12:34 AM

Re: Parting out 84 Chevy 3/4 ton 4x4*

Quote:

Originally Posted by KrazyRay (Post 3791177)

I sold the carb to a board member. I think I let it go too cheap.

It happens :) New, those things sold for close to $500 (if memory serves me correct)

KrazyRay

02-10-2010 12:36 AM

Re: Parting out 84 Chevy 3/4 ton 4x4*

Quote:

Originally Posted by CHROMAHOLIC (Post 3791293)

Ray...still looking for window defrost vents for a 77 if you get to checking your other cabs or anybody else that might have a set in good shape...thanks, Jim

I found a set in a 78 Chevy with AC. I can do $25 plus shipping for the 2 defrost vents and the connector duct. If interested, let me know your address for a shipping quote. Thanks, Ray

Stitch

02-10-2010 12:52 AM

Re: Parting out 84 Chevy 3/4 ton 4x4*

Ray, Chromaholic also probably wants good cab corner speaker grills if he hasn't already picked some up somewhere...

KrazyRay

02-10-2010 01:00 AM

Re: Parting out 84 Chevy 3/4 ton 4x4*

Quote:

Originally Posted by Fat Hoe (Post 3791503)

Ray, Chromaholic also probably wants good cab corner speaker grills if he hasn't already picked some up somewhere...

Thanks Chuck, but I sold the set I had a while back.

CHROMAHOLIC

02-10-2010 07:48 AM

Re: Parting out 84 Chevy 3/4 ton 4x4*

Quote:

Originally Posted by KrazyRay (Post 3791454)

I found a set in a 78 Chevy with AC. I can do $25 plus shipping for the 2 defrost vents and the connector duct. If interested, let me know your address for a shipping quote. Thanks, Ray

Thanks Ray, shipping would be to 14086 can you email me a pic of them to
lowagon@rogers.com then I can respond with the full shipping address....and payment details.

Jim

KrazyRay

02-10-2010 05:37 PM

Re: Parting out 84 Chevy 3/4 ton 4x4*

Quote:

Originally Posted by CHROMAHOLIC (Post 3791756)

Thanks Ray, shipping would be to 14086 can you email me a pic of them to
lowagon@rogers.com then I can respond with the full shipping address....and payment details.

Jim

Jim, I'm sorry. The mounting tabs broke when I pulled them out. $10 plus shipping if you still want them. The 2 vents and the duct all all one piece. Thanks, Ray

CHROMAHOLIC

02-10-2010 06:06 PM

Re: Parting out 84 Chevy 3/4 ton 4x4*

Ray can you send me pic if possible.....or post a pic on here so I can see what it looks like

DBLSPRT68

02-12-2010 02:08 AM

Re: Parting out 84 Chevy 3/4 ton 4x4

Quote:

Originally Posted by KrazyRay (Post 3776847)

I'm still using the carb. I should probably sell it because I can use the money right now. I better check to see who wanted the carb first as per the site rules. Thanks, Ray

Ray, got the carb today. Great job on the packing!!!! Looks great!!! Thanks for the deal!!!! PS. I know about these carbs. I bought 2 of them new. Over $500.00 each :(. Had problems with the first one on my 68 Camaro and sent it back, got a rebuilt one in return(not too happy about that). Second one is still on my truck right now, and runs great. This one will be a good spare, and will sit on my spare 350. You never know when your going to find a cool car that just needs a Chevy heart ;) transplant. Edlebrock only made these for a few years and stopped.

Sarge261

02-12-2010 09:59 AM

Re: Parting out 84 Chevy 3/4 ton 4x4*

Ray I recieved my tank brackets and straps yesterday. Great job, these things are mint. I would never find them up here in that condition. Thanks again and I always look foreward to see your for sale adds. Your a class act with your parts and I will buy from you as often as I can.

Sarge

TwoFiftyShifter

02-12-2010 10:13 AM

Re: Parting out 84 Chevy 3/4 ton 4x4*

Hey Sarge Where are you in NY?

Sarge261

02-12-2010 10:15 AM

Re: Parting out 84 Chevy 3/4 ton 4x4*

Albany/Schenectady area

All times are GMT -4. The time now is 06:01 PM.

Page 5 of 6

Show 40 post(s) from this thread on one page