Re: 55 2nd serie GMC
If between those 2 wheels I'd say front. Can you notch the bed side to clear the caliper or does it need a lot more room?
|
Re: 55 2nd serie GMC
Of the 2 I'd have vote for the one on the FRONT!
|
Re: 55 2nd serie GMC
I'd vote for the front too.
|
Re: 55 2nd serie GMC
I have to be different and say rear. your making awesome progress, can't wait to see some more
|
Re: 55 2nd serie GMC
I'm afraid I would have to pass on both sets of wheels. I would go for some torq thrust or some steeles with babys and rings, depending on the color and look of the truck. but it's your truck go with what you like and don't look back
|
Re: 55 2nd serie GMC
Well what have you been up to lately. Are you going to tub?
|
Re: 55 2nd serie GMC
Quote:
Took the Belair out for a new season of cruising and car shows. I have to do a couple things to the car, rear pinion seal, new carb kit and tune up. |
Re: 55 2nd serie GMC
Quote:
|
Re: 55 2nd serie GMC
1 Attachment(s)
Quote:
In this pic all the glass trim and new WW tires are not on yet.... ................oh yeah and it use to be a 4 door :metal: |
Re: 55 2nd serie GMC
That is very clean! Looks like a lot of work, but I bet it turns heads! No Olds-mo-PILE there. very sweet...
|
Re: 55 2nd serie GMC
nice olds!!!!!!!!!!
i keep thinking about selling my chevelle to get into something like that. |
Re: 55 2nd serie GMC
Thanks guys, I drive it anywhere I can, its still a work in progress. I installed the "home depot special" insulation yesterday, peel-n-seal and from bubble wrap, it works wonders, brings the temp down alot, quiets the car, it makes it more tolerable to drive.
Anyhow back to JML55 truck, those rear end pics really help put alot with wheel placement. Hey 1-ton I got your PM. Let me know if its still available. Check you PMS for more details. Rey |
Re: 55 2nd serie GMC
3 Attachment(s)
Have not done too much lately, just got my LS1 F-body oil pan today (ebay purchase) I'm swapping the 5.3 truck oil pan for a Camaro oil pan, it will give me a lot more ground clearance. I'm not to happy with this oil pan, it's used but the price was decent. After cleaning it really good i found cracks in the bottom. Hope my welder can fix it up.
Attachment 477173 Attachment 477174 I modified the truck windage tray to fit the new oil pan. Attachment 477172 I'm still waiting for headers to come in, hope to post more pics next week. |
Re: 55 2nd serie GMC
4 Attachment(s)
Got the new headers a couple days ago. I really though they would fit perfectly but of course no, the driver side fit like a glove but the pass side hits the rear lower control arm mount. I also have to redesign the engine mounts. The factory Camaro mounts puts the engine about one inch to the right of the center line which doesn't help at all. I was thinking to extend the pass side pipe about 6" and move the flange down , that should move the flange away from the control arm and starter.
|
Re: 55 2nd serie GMC
2 Attachment(s)
Been working on trying to fit the right side header but no luck, it looks like I'm going to have to cut the collector flange. Got tired of that so today i decided to put the cab back onto the frame to see if every thing is OK. Well except for the right header I'm happy with the way the engine sit in the engine bay.
|
Re: 55 2nd serie GMC
Nice and tight with those headers! Im getting ready to sit my 5.3 in my 59 that has also been camaro clipped. I dont know if you mentioned it but what vehicle were those headers made for? How close was the truck pan to the ground?
|
Re: 55 2nd serie GMC
Quote:
http://www.summitracing.com/parts/ED...5&autoview=sku Like i said earlier drv side fit great, pass side need modification. The truck oil pan was below the crossmember about 3in with only about 4in clearance to the ground. So i when with a Camaro 1998 - 2002 oil pan now the oil pan is about 1/2in above the bottom of the crossmember and it about 7 - 8 in off the ground. |
Re: 55 2nd serie GMC
2 Attachment(s)
Not to much progress these days, working on the house. Got new set of wheels today, what do you thing?? Also working on cold air intake that i got of ebay.
|
Re: 55 2nd serie GMC
Nice wheels. What kind are they?
Kim |
Re: 55 2nd serie GMC
16x8 gmc s15 2wd xtreme jimmy sonoma factory oe wheels 2001-2003
|
Re: 55 2nd serie GMC
truck is looking awesome, smae rims i use to have on my X-treme, but polished, one of my favorites.
|
Re: 55 2nd serie GMC
Looking GOOD!!
|
Re: 55 2nd serie GMC
4 Attachment(s)
Small progress lately, i have been working on the cold air intake tubing and air filter box. Trying to fit the filter box on the left side of the rad. I though i had it under control, made a carton box prototype and cut the sheet metal, when i realized that the hood tilt hinge kit was in the way, so back to the drawing board.:banghead:
Sent all the front grill pieces to the chrome shop today.$$$$ |
Re: 55 2nd serie GMC
Looks good, but that sucks. Can you come into the box on the engine side rather than the top?
|
Re: 55 2nd serie GMC
Quote:
|
All times are GMT -4. The time now is 05:06 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com