The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 5 of 13 1234 5 678910 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   OR Serpentine belt conversions (https://67-72chevytrucks.com/vboard/showthread.php?t=503044)

tll74 01-08-2013 07:44 PM
Re: Serpentine belt conversions
 
Quote:
Originally Posted by 425HP409 (Post 5783018)
Tom, have you been able to get the measurement for me?
Charles
Posted via Mobile Device
Charles, 11 inches from the water pump gasket surface on the block to the face of the fan clutch. Thanks, Tom

tll74 01-08-2013 07:50 PM
Re: Serpentine belt conversions
 
Quote:
Originally Posted by First c10 (Post 5804594)
How do you connect the radiel compressor to the current A6 style compressor? or what referegerant lines do you need? ok try this again? Can you provide me with part numbers of the A/C lines that would fit the old A/C system to a newer compressor??? hope this makes sense...
Thanks
There are no direct fit hoses for this conversion. You will have to custom make them. I can provide the hoses that match the pump to build off of. Thanks, Tom

425HP409 01-09-2013 07:18 PM
Re: Serpentine belt conversions
 
Quote:
Originally Posted by tll74 (Post 5804812)
Charles, 11 inches from the water pump gasket surface on the block to the face of the fan clutch. Thanks, Tom
I will take the Big Block one. pm me payment info, thanks Charles
ps, zip is 75034

TobyArnot 01-09-2013 08:21 PM
Re: Serpentine belt conversions
 
Quote:
Originally Posted by tll74 (Post 5799613)
Hi Robbie, You should have it Wednesday. Here is a pic of it just before packaging. The fan is not in the pic. It turned out very nice. Sorry for the delay to many speed bumps during the hoildays among other things. You should like it. Thanks, Tom
.
Wife called and says big heavy box came UPS. Haven't gotten away from work, I'll get it later.
.
And thanks again, Tom

tll74 01-11-2013 05:45 PM
Re: Serpentine belt conversions
 
Quote:
Originally Posted by 425HP409 (Post 5807020)
I will take the Big Block one. pm me payment info, thanks Charles
ps, zip is 75034
Charles, It weights 96 lbs and shipping via UPS is 75.03 thanks, Tom

425HP409 01-12-2013 10:25 AM
Re: Serpentine belt conversions
 
Quote:
Originally Posted by tll74 (Post 5810973)
Charles, It weights 96 lbs and shipping via UPS is 75.03 thanks, Tom
Payment sent, thanks
Posted via Mobile Device

tll74 01-13-2013 01:11 PM
Re: Serpentine belt conversions
 
Thanks Charles, it will ship tomorrow.

68basket 01-23-2013 10:20 PM
Re: Serpentine belt conversions
 
Do you have any more setups for sbc? I would need the angled thermostat housing if you have that also. zip is 40299 business address.

67ctener 01-23-2013 10:24 PM
Re: Serpentine belt conversions
 
What does a bb set up cost?
Posted via Mobile Device

tll74 01-24-2013 05:10 PM
Re: Serpentine belt conversions
 
Quote:
Originally Posted by 68basket (Post 5838742)
Do you have any more setups for sbc? I would need the angled thermostat housing if you have that also. zip is 40299 business address.
Yes, I do. Shipping is 66.00
Quote:
Originally Posted by 67ctener (Post 5838759)
What does a bb set up cost?
Posted via Mobile Device
325.00 plus shipping. The last one shipped to the east coast for 75.00. Your a lot closer so it would less.


Thanks, Tom

68basket 01-24-2013 10:19 PM
Re: Serpentine belt conversions
 
ill take one for sbc. Let me know how to pay and a time frame.

Thanks, taylor

tll74 01-26-2013 03:42 PM
Re: Serpentine belt conversions
 
Quote:
Originally Posted by 68basket (Post 5841030)
ill take one for sbc. Let me know how to pay and a time frame.

Thanks, taylor
Taylor, I can ship one out Monday. I'll send a PM next. Thanks Tom
Posted via Mobile Device

Gryndar 01-30-2013 12:17 AM
Re: Serpentine belt conversions
 
Do you have any of the 5.7l, 4.3l vortec setups? That have the a/c comp on driver side and alt on passenger. If so how much shipped to 94590
Thanks

67ctener 01-30-2013 03:21 PM
Re: Serpentine belt conversions
 
Sent you pm for big block set up
Posted via Mobile Device

tll74 01-31-2013 01:56 AM
Re: Serpentine belt conversions
 
Quote:
Originally Posted by Gryndar (Post 5855095)
Do you have any of the 5.7l, 4.3l vortec setups? That have the a/c comp on driver side and alt on passenger. If so how much shipped to 94590
Thanks
Yes I do. I'll do one for the same cost, 225.00 plus shipping. Thanks, Tom

tll74 01-31-2013 02:16 AM
Re: Serpentine belt conversions
 
Quote:
Originally Posted by 67ctener (Post 5856207)
Sent you pm for big block set up
Posted via Mobile Device
Got the PM I'll get shipping cost tomorrow. I have one kit left and there 325.00 plus shipping. Thanks, Tom

Gryndar 01-31-2013 02:25 AM
Re: Serpentine belt conversions
 
Shipping to 94590 please
Thanks, Tom

tll74 02-01-2013 11:21 PM
Re: Serpentine belt conversions
 
Quote:
Originally Posted by Gryndar (Post 5857651)
Shipping to 94590 please
Thanks, Tom
Sorry, I got the cost and forgot to post it. 46.00
Thanks, Tom

First c10 02-25-2013 03:26 PM
Re: Serpentine belt conversions
 
Tom, what is the cost of a sbc setup to 93635?
thanks
scott

tll74 02-26-2013 02:38 AM
Re: Serpentine belt conversions
 
Quote:
Originally Posted by First c10 (Post 5911851)
Tom, what is the cost of a sbc setup to 93635?
thanks
scott
Scott, 46.00 shipping. Thanks, Tom

425HP409 02-26-2013 11:51 AM
Re: Serpentine belt conversions
 
I will take the Big Block set up that you have left.
Charles

Expat_dude 02-27-2013 12:05 AM
Re: Serpentine belt conversions
 
Price for sbc setup to 39601. I am going with e fans so I don't need the clutch/fan
Posted via Mobile Device

tll74 02-27-2013 01:23 AM
Re: Serpentine belt conversions
 
Quote:
Originally Posted by 425HP409 (Post 5913981)
I will take the Big Block set up that you have left.
Charles
Charles, It's yours.
Quote:
Originally Posted by Expat_dude (Post 5915585)
Price for sbc setup to 39601. I am going with e fans so I don't need the clutch/fan
Posted via Mobile Device
200.00 w/o the fan and clutch. 66.00 shipping.

Thanks, Tom

FickleFinn 02-28-2013 05:02 AM
Re: Serpentine belt conversions
 
I would like a sbc setup, do you have one and what is the price to 95688?

tll74 02-28-2013 08:07 PM
Re: Serpentine belt conversions
 
Quote:
Originally Posted by FickleFinn (Post 5918182)
I would like a sbc setup, do you have one and what is the price to 95688?
Yes, I do. 46.00 shipping to 95688. Thanks, Tom


All times are GMT -4. The time now is 05:15 PM.
Page 5 of 13 1234 5 678910 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com