Re: Putnam
The factory ones are for a 4x10.
|
Re: Putnam
Low Elco ,thanks for that bit of info ,that helps .
|
Re: Putnam
2 Attachment(s)
Well my A/C quit cooling so the truck goes back to the shop tomorrow. If its something small I'll get it fixed, if not I'll be ordering a Vintage Air system. I've been busy getting my deck built and finishing up some things.
|
Re: Putnam
Nice work on the deck. I like those accent lights on the posts.
|
Re: Putnam
Looks good. I was reminded of the 'deck envy' skit Jeff Foxworthy did with the other blue collar comedians.
|
Re: Putnam
Nice
|
Re: Putnam
Quote:
Quote:
Quote:
|
Re: Putnam
Well the A/C problem turned out to be the compressor. He swapped it under warranty so no money spent on that. It is working good now. It fogged up the windows pretty good on the way home. I had it full blast too.
|
Re: Putnam
3 Attachment(s)
foggy & 53 degrees. It was only 77 degrees outside so the test comes when its 100 degrees. We'll see.
|
Re: Putnam
1 Attachment(s)
A little better in the morning.
|
Re: Putnam
2 Attachment(s)
I ordered a chest type tool box. I also bought some seam sealer for the bed. some of it is cracking up and missing. I may seal it and paint the bed but the weather hasn't been cooperating lately. It rains almost every evening except tonight. I hope its over.
|
Re: Putnam
Cool tool box.
|
Re: Putnam
Cool Truck. I like the center caps.Goodluck
|
Re: Putnam
Quote:
Quote:
|
Re: Putnam
1 Attachment(s)
I got the bed seam sealed.
|
Re: Putnam
3 Attachment(s)
I got the rails painted and the rattle can liner on it. I just wanted to seal the bed before winter hits as I'm not covering the bed. It might look a little splotchy in the pics but its still wet. I will do some touch ups all over the truck to get rid of all the chips and rust spots.
|
Re: Putnam
The bed looks great .
|
Re: Putnam
Quote:
Thanks. I cranked the Led Zep Mothership and got busy. |
Re: Putnam
Looking good
|
Re: Putnam
3 Attachment(s)
I finally got around to putting the toolbox in the bed. I put in some captured nuts in the floor and mounted it. I left some room between the front bed panel and box so I could keep it clean back there. I like to keep the drain holes clear.
|
Re: Putnam
2 Attachment(s)
before and after
|
Re: Putnam
Quote:
|
Re: Putnam
Bed looks great! Is that a roll-on bedliner?
|
Re: Putnam
Quote:
Quote:
|
Re: Putnam
How many cans did it take you? Would you recommend it?
|
All times are GMT -4. The time now is 10:46 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com