Re: 68 c10 6.5 turbo diesel
Thanks
|
Re: 68 c10 6.5 turbo diesel
5 Attachment(s)
Got most of the motor together. Will install rockers and push rods tomarrow. I installed the 1/2 inch aluminum hard line to the fuel pump. Installed the new poly engine mounts. I will be putting it in truck here soon so stay tuned.
|
Re: 68 c10 6.5 turbo diesel
5 Attachment(s)
Here are the pics of the fuel line.
|
Re: 68 c10 6.5 turbo diesel
2 Attachment(s)
Here are some more pics.
|
Re: 68 c10 6.5 turbo diesel
Nice work. I don't miss working on the electronic 6.5s for sure. The wiring seemed to be crap on those trucks.
|
Re: 68 c10 6.5 turbo diesel
That is for sure the way they run the harness is stupid no wonder they always had problems. I hope the way I did my harness I won't have problems.
|
Re: 68 c10 6.5 turbo diesel
what fitting did you use to run the 1/2" line to the injection pump? I am guessing you had to drill out the adapter thingy?
|
Re: 68 c10 6.5 turbo diesel
The fitting is a 7/16-20 X 3/4-16 hydraulic 90 deg fitting. I also drilled out the fitting on the 7/16 side for more flow. I know for sure I have no flow issues to the pump at least to the fitting.
|
Re: 68 c10 6.5 turbo diesel
5 Attachment(s)
I got the motor in the truck finally. I finished the ECM wiring and checked and double checked it for proper routing. I mounted the acc brackets the alt and ps pump. The trans is in temp to have the engine in the right spot for wiring and the other stuff needing done. I was going to use elec cooling fans but I think a BB fan shroud will work. I am going to by one from member teeitup. I still need to finish the clutch linkage. Here are some pics.
|
Re: 68 c10 6.5 turbo diesel
3 Attachment(s)
Here are some more pics. I'm still waiting for the other valve cover to be powder coated wrinkle black. The turbo and manifold are also on there temp to get an idea on intercooler piping.
|
Re: 68 c10 6.5 turbo diesel
Looking great , I'm envious.
I miss my old 6.5 na G20 van and my 3500HD turbo 6.5. I still have a military 6.2 that was rebuilt but let sit. New pistons in the box, rings, & gasket set all waiting. My trucks are all geared too low for a diesel ,and no overdrive either. Keep up the great work ! |
Re: 68 c10 6.5 turbo diesel
Thanks. Just swap in an overdrive trans. I'm sure the mpg increase would pay for that. You can put just about anything behind a na 6.2 even a 700r4.
|
Re: 68 c10 6.5 turbo diesel
Quote:
Approx. 2,200 rpm in od with my tire height @ 70 mph. And you're right, it should average about 16 to 19 mpg ! |
Re: 68 c10 6.5 turbo diesel
Wow! That is officially the first time I have liked one of the 6.5L turbo power beauty covers! That is one sharp looking engine.
|
Re: 68 c10 6.5 turbo diesel
Quote:
|
Re: 68 c10 6.5 turbo diesel
Quote:
|
Re: 68 c10 6.5 turbo diesel
I may have the OBD II style laying around somewhere. You could have that if you want it. But I think you're right the 94-95 would look better.
|
Re: 68 c10 6.5 turbo diesel
Quote:
|
Re: 68 c10 6.5 turbo diesel
Looking really good! You do nice work my friend.:metal::metal:
|
Re: 68 c10 6.5 turbo diesel
Quote:
|
Re: 68 c10 6.5 turbo diesel
It looks really nice. It should make for a beast of a 6.5 too.
|
Re: 68 c10 6.5 turbo diesel
Quote:
|
Re: 68 c10 6.5 turbo diesel
5 Attachment(s)
Here are some pics of the clutch linkage. I made the bracket on the engine side and the frame side. The bracket is mounted to the bell housing. The bell housing is a 56 Belair.
|
Re: 68 c10 6.5 turbo diesel
2 Attachment(s)
Here are some more I still have to paint it.
|
Re: 68 c10 6.5 turbo diesel
5 Attachment(s)
I got the main pos cable routed. I routed it over the trans clamped it to the flange the runs over the trans. I got the clutch linkage done. I mounted and wired the baro sensor. I then finished the wiring on the engine I hooked it up to the factory harness in the valley of the engine. I also wired up the glow plug relay and the water sensor in the filter housing.
|
All times are GMT -4. The time now is 04:59 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com