Re: LS1 into a 73 cheyenne
 

Check this out..........That is not going to work, Please pick a more "family friendly" avatar.

Re: LS1 into a 73 cheyenne
 

update
Next up i will be installing power lock actuators (key less entry) and alarm system with remote start.

parts:

alarm Viper 5901
2- actuators
2- 5 wire relays
wire

Re: LS1 into a 73 cheyenne
 

I will post more pics after i finish the alarm install.

Re: LS1 into a 73 cheyenne
 

If you can get your hands on 5 wire relays on the cheap and would like to go that route, this is how to wire it up. the benefit of this method is when one wire is energized the other will remain ground, and vice versa. this means you only need 2 relays instead of 4.

Re: LS1 into a 73 cheyenne
 

Dude! Don't know if that avatar will fly?

Re: LS1 into a 73 cheyenne
 

it won't......

Re: LS1 into a 73 cheyenne
 

:lol:

Re: LS1 into a 73 cheyenne
 

:lol:

Re: LS1 into a 73 cheyenne
 

My bad hope this 1 works :metal:

Re: LS1 into a 73 cheyenne
 

Mo' Betta'
:lol:

Re: LS1 into a 73 cheyenne
 

:lol:Much better...how about "BAD MUTHATRUCKA" :lol:

Re: LS1 into a 73 cheyenne
 

Update- still waiting on parts but i finished up the alarm and door lock actuators. I also installed a hood pin switch that triggers alarm, here are a few pics.

Re: LS1 into a 73 cheyenne
 

Cool progress!

Re: LS1 into a 73 cheyenne
 

Fine looking alarm system!

Re: LS1 into a 73 cheyenne
 

that is cool!
care to elaborate on it? brand? is it vehicle specific?

Re: LS1 into a 73 cheyenne
 

No problem this is the Viper model 5901 for vehicles and it comes with two remotes one is like a pager so it vibrates and it displays different things, it has a onboard lithium-ion rechargeable battery with mini-USB for recharging

In remote start mode, if Active Temp Check is selected, Responder LC3 will display Temperature (in either Fahrenheit or Celsius) instead of the time (the default display). Now you can see the actual temperature inside the vehicle, before walking through the weather to get to it! If it isn’t warm enough inside your car yet, use Runtime Reset to extend your runtime. Don’t worry about forgetting about your car – Responder LC3 reminds you 3 minutes before your time runs out, with an audible tone, a vibration, and on the screen.

If anything happens to your vehicle, it notifies you right away if you are within range, playing the Revenger siren tones from inside your pocket. If anything has happened to your vehicle during your absence, LC3 spells out what happened Shock Sensor, hood open, door open for example.

Control Center – combines the Status LED and Valet Switch with the 2-way Antenna, making the switch easy to locate, and eliminating drilling of any holes in the dash

# of Remotes 1 Responder LC3 2-Way and 1 5-button 1-Way
Range Up to 1 Mile
Security Yes
Remote Start Yes
Keyless Entry Yes
SmartStart Compatible Yes
Encryption SuperCode™
Domelight Supervision Yes
Stinger DoubleGuard Shock Sensor Yes
Neo Revenger 6-Tone Siren Yes
Failsafe Starter Kill Yes
Anti-Carjacking (VRS) No
Guaranteed Protection Plan (GPP) Yes
Auxiliary Channels for Optional Functions 4
Remote Control Trunk Pop Yes

Auxiliary Channels for Optional Functions 4

Cool thing is that u can do pretty much anything with the auxiliary channels such as roll up roll down windows pop doors open if u have shaved door handles, control youre air bags pretty much anything you want.

I highly recommend this alarm system to anyone.

Re: LS1 into a 73 cheyenne
 

I like this build. Your truck is going to be wicked :devil: I need to get a good alarm for my 79 GMC. I will be checking into this one. I like the remote start option and all the remote functions. How is your LS build coming? Will be pulling my old engine this weekend getting ready for my 6.0l swap. :smoke:

Re: LS1 into a 73 cheyenne
 

Thanks for the info!!

Re: LS1 into a 73 cheyenne
 

How is your LS build coming? Will be pulling my old engine this weekend getting ready for my 6.0l swap. :smoke:[/QUOTE]

Its slowly coming together still waiting on parts, good luck with you're swap, will stop by you're build thread to check it out.

Re: LS1 into a 73 cheyenne
 

Update finally got some parts in. I got the A/C compressor billet cover, i got my twin horn and air filters, billet straight neck thermostat, Lockar column arm kit, and a tube bender from Imperial bends 3/16, 1/4, 5/16 and 3/8 in. O.D. tubing for my fuel lines and trans lines.

Re: LS1 into a 73 cheyenne
 

sum more

Re: LS1 into a 73 cheyenne
 

A/C compressor billet front cover, some before and after shots.

Re: LS1 into a 73 cheyenne
 

:chevy:some nice looking Bling! Dude, I wish we had half your budget. Keep the pics coming!

Re: LS1 into a 73 cheyenne
 

The pulley covers look great. I was wondering, does that type of air inlet system cause problems with heat soak? Either way the dual air intake looks cool.

Re: LS1 into a 73 cheyenne
 

Let me know how you like the tubing bender and how much it was, I need to get one soon. Hw much was the whole intake air filter set up?

Looking great!