Re: Dropmember Rear 63-72 Spy Pic
Dont think it was me, Truck has not been out for a while. I think its going back under the knife soon.
|
Re: Dropmember Rear 63-72 Spy Pic
Looks good man, love the drop member you made for these guys a while back. Next time you do a write up on let me know i will send some of our arms , you can give them a try.
Richie |
Re: Dropmember Rear 63-72 Spy Pic
Quote:
|
Re: Dropmember Rear 63-72 Spy Pic
Quote:
would love to, but i dont want to piss any one off before i pay for the advertising. They are on our online store page and our myspace though. lol i am sure they will send me all the info to advertise tonight, then i can post pics and ****. Richie |
Re: Dropmember Rear 63-72 Spy Pic
5 Attachment(s)
Ok guys... Here's the updated pics of the production Dropmember Rear.
- Bolt-in notch with integrated bridge (available to lay frame from 26" to 32" tire diameters; designed for a 5" ride height) -Sleeved bags mounted over the axle for increased stability and ride quality. - Bolt-on arallel four-link with panhard bar (axle plunges .625" from ride height to dump; axle shifts lateraly .375 inches from ride height to dump) -Carrier bearing crossmember (allows the use of two-piece drive-shaft, eliminating cab tunneling) |
Re: Dropmember Rear 63-72 Spy Pic
Sweet man that looks good!
|
Re: Dropmember Rear 63-72 Spy Pic
Beautiful!!!!! You know if you came out with this a long time ago you could have saved me alot of time, money and a hell of alot less stress. ;) Seriously though it looks sweet!!:metal: Nice job like always
Josh |
Re: Dropmember Rear 63-72 Spy Pic
I've got a question about that carrier bearing x-member. The stock xmember bolts(rivets if you havent taken it off) to the top and bottom rails with (off the top of my head) about 20 bolts, and also has a reinforcing plate for the bottom rail. Your xmember bolts to the side rails with a total of 4 bolts. Are we losing any rigidity of the frame because the top and bottom rails are not tied together? Seems like the frame would twist a lot more especially since the closest xmember behind it is at the bridge.
Also, will that carrier bearing fit the stock driveshaft? If so, where did it come from. Thanks nate, Josh |
Re: Dropmember Rear 63-72 Spy Pic
Quote:
The chassis pictured had the factory trailing arm crossmember removed. There will be a crossmember to replace the factory trailing arm crossmember installed when the chassis is complete. This carrier bearing crossmember is designed to be used in conjunction with a modified factory trailing arm crossmember, or an ECE drop trailing arm crossmember. The carrier bearing is a factory replacement for a 71-72 LWB C10 truck. |
Re: Dropmember Rear 63-72 Spy Pic
Swanky! What mods would need to be done to a stock t-arm crossmember? Flatten the bottom? Are the axle brackets weld-on?
Looks :cool: |
Re: Dropmember Rear 63-72 Spy Pic
Quote:
Currenlty the design features a bracket that welds to the axle tube and then the rest of the pieces bolt to it. That is the only piece of the entire kit that needs to be welded upon installation. |
Re: Dropmember Rear 63-72 Spy Pic
Ahhhh...Sh**, you are getting worse than the IPHONE ;) How long will we need to wait to get the tubular cross member. I am never going to get this truck done. ;) love ya Nate, **DISCLAIMER** no man crush implied.
|
Re: Dropmember Rear 63-72 Spy Pic
Will the empire drive line billet carrier bearing work on the crossmember?
|
Re: Dropmember Rear 63-72 Spy Pic
Quote:
The carrier bearing crossmember can be moved up,down, forward or back to accomodate different configurations. |
Re: Dropmember Rear 63-72 Spy Pic
Quote:
|
Re: Dropmember Rear 63-72 Spy Pic
Quote:
I'm lookin' for a part time job... :lol: |
Re: Dropmember Rear 63-72 Spy Pic
nice work nate,might have home for one soon
|
Re: Dropmember Rear 63-72 Spy Pic
I hope you felt the love.
Quote:
|
Re: Dropmember Rear 63-72 Spy Pic
Quote:
|
Re: Dropmember Rear 63-72 Spy Pic
Just wondering are you going to sell the 4-link separate from notch if someone wanted?
|
Re: Dropmember Rear 63-72 Spy Pic
Quote:
|
Re: Dropmember Rear 63-72 Spy Pic
Nate..... whats up brother!?!.... what rear airspring are you setting that thing up to use?
|
Re: Dropmember Rear 63-72 Spy Pic
cool thanks....brother
|
Re: Dropmember Rear 63-72 Spy Pic
Quote:
|
Re: Dropmember Rear 63-72 Spy Pic
So this kit now is designed specifically to work with a 4 link and not with the factory trailing arms, correct?
-Andy |
All times are GMT -4. The time now is 02:01 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com