Re: project pacific wonder
 

more of the fuel lines and pump wiring harness
also the exhaust manifold and turbo housing

Re: project pacific wonder
 

more pictures

motor mount
fuel pump/ filter
transmission mount
exhaust manifold

Re: project pacific wonder
 

we got the rear sway bar mounted
drive shafts arrived and in place but still need to adjust the rear axle up 3 degrees and measure for appropriate shocks

Re: project pacific wonder
 

the front axle is also in place
time to install the skid plate and finallize the fuel lines and fuel pump wire harness
also have the mounting bracket and serpentine tensioner

i purchased the vintage air ac kit and the compressor it came with will be a challenge to fit into the place we need to put it so we have decided to go with a dodge AC compressor instead

Re: project pacific wonder
 

Cool build. Love the Cummins!

Re: project pacific wonder
 

Very inspirational!

Re: project pacific wonder
 

what ac/tensioner bracket is that?

Re: project pacific wonder
 

jeremy, i dont know right off but i will get back to you on that.

Re: project pacific wonder
 

Thank you! And the burb is looking great!

Re: project pacific wonder
 

Jeremy, the bracket is from an industrial application motor, working on a part number for you.

Re: project pacific wonder
 

and thanks for the positive comments you guys.

Re: project pacific wonder
 

the previous accessory/tensioner bracket pictured does not work as it blocks a coolant port at the top of the motor....here is the progress on the new bracket we are machining.

Re: project pacific wonder
 

here is a customed machined swivel port for the coolant, it will mount between the accessory bracket and the motor.

Re: project pacific wonder
 

metal candy!

Re: project pacific wonder
 

i have finally bolted the body to the frame....it is comming together!

some more headway in the machining department... the adapters are about finished and the gear has been mounted to the PS pump which will run directly from the cam shaft

Re: project pacific wonder
 

words cant explain how badass this build is,
iv been looking for 4bt locally to swap out in my truck but they are hard to find.

love the truck, very beautiful

Re: project pacific wonder
 

Chuck, is that the cummins ps pump adapter or one you made?
Posted via Mobile Device

Re: project pacific wonder
 

well i think it is the adapter.....i will check, you see i am not the one doing the machining work.

Re: project pacific wonder
 

Cool man! I would love to find the part numbers for that so i can ditch ny vacuum pump!
Posted via Mobile Device

Re: project pacific wonder
 

it is a factory cummins adapter
you can see the part numbers in the these pictures
i think it is tree parts

Re: project pacific wonder
 

well the push rod for the brake has been adapted with an adjustable fitting to better reach the pedal. and finally mounted. we bench bled the master cylinder and then the brakes. only 2 leaks so far. i expect more leaks when the motor is running and the hydro boost pressure is applied to the brakes.
also mounts and brakets are in process for the radiator and intercooler. should be done this week, fingers crossed!
and finally here is a picture of the grid heater for extreme cold weather starts.

the last picture is an eyelet for hoisting the motor in the future as well as a solid anchor for aligning the accessory bracket and coolant intake port.

Re: project pacific wonder
 

alternator if here...we will be adding an after market internal regulator to it.
had some trouble getting the right mounting pads for the radiator, now that we have them it is time to make the mounting brackets.

also have all the tubing bends and connectors for the intercooler, etc...

really beginning to come together.

Re: project pacific wonder
 

looking good Chuck, that will be on the road soon.

Re: project pacific wonder
 

hey did you enter your truck into the hot rod show this weekend?

Re: project pacific wonder
 

No, still working on it a bit, final cut and buff and a few more billet pieces on order. Working on the shop too.