Re: "DOORED" my truck this weekend
Quote:
|
Re: "DOORED" my truck this weekend
How about a few pics of your hood choppin job! That is one way of keeping the tires in check! Looking good.
Kevin LFD Inc. |
Re: "DOORED" my truck this weekend
Once again Im going with hammered past the ground. I bought my truck off of a good ol boy, I could only imagine what he would say if he saw it.....hahahahahahahaha Some people say that Im making JUNK out of a perfectly good truck others want to have theres just as low if not lower. Also there is no way these trucks can be drove that hammered " Dont make a comment THUNDER" thats why with a flip of a switch your moon ridin again. I bet one thing, these trucks with air ride roll smoother than stock suspension.
|
Re: "DOORED" my truck this weekend
1st of all stock doesn't suck ! I love these trucks and plan on building a staic dropped stock(2 tone, rallys etc..) version later. I did the same thing with my 1st gen Camaros. I have the 67 thats a fullout drag car w/ 14 point cage etc.. and I have the 68 rs/ss I have been restoring since I was younger. I am into "cars" for myself and noone else, and I respect peoples decisions. I may not like them (hummer clip on NBS chevy) but I will tell them to push on. and yes you can drive the truck hammered but of coarse it depends on the road conditions (drive wise) I set it up to where my alignment is just right with the body 2-3" off the ground and thats where I will drive until of course I need to TURN then yes at the flick of a switch I will look like a boat in the water. then back to land I go. Nitrogen refills arent much around here:alc:
|
Re: "DOORED" my truck this weekend
I was talking about the a-arms for a lowered truck, not the trucks themselves. And if you find a stock 69 camaro down there let me know Im lookin for one.
|
Re: "DOORED" my truck this weekend
That truck is sweet, let me get my jaw off the ground.
|
Re: "DOORED" my truck this weekend
When the drivetrain is installed we are going to wrap the new inner fender panels up and around to the front hood section over the radiator support for a smooth and clean look. Man I wanna drive this thing already !
http://mindtometal.com/gallery/bochevyc10/b07.jpg http://mindtometal.com/gallery/bochevyc10/b12.jpg http://mindtometal.com/gallery/bochevyc10/b11.jpg |
Re: "DOORED" my truck this weekend
Every time I look at your truck all I think is holly hammered. How did this guy get it to lay out so hard. Inner fenders are lookin sick. I might try to bite a small bit of your idea on this one.
|
Re: "DOORED" my truck this weekend
thats my secret deucey lol
|
Re: "DOORED" my truck this weekend
so how do you remove the front clip? what about the bolts under the cowl panel? i thought about doing that to my font end but dont know how you would get the bolts in there.
|
Re: "DOORED" my truck this weekend
you use the bolts under the door, by the cowl, and then undo the radiator support, and take it off in one piece like the bed lol. It's all pretty stiff. It will be much stronger when completed though.
|
Re: "DOORED" my truck this weekend
looks sick.
|
Re: "DOORED" my truck this weekend
What kind of control arms are ya runnin?
|
Re: "DOORED" my truck this weekend
they are one-offs
|
Re: "DOORED" my truck this weekend
is ray goin to paint ur truck? and the work comin from ray im suprised it lays that hard everything i see that comes from his shop lays hard and tuks hella lugs
|
Re: "DOORED" my truck this weekend
I bodydropped it. Z'd etc.. They helped with the bedwork control arms and fender mods. I am going to blast and prime the truck this weekend. Then I will do the bodywork and primer seal it. Then it wont be too long before I drop the drivetrain in rewire it and DRAG on down the road !!
|
Re: "DOORED" my truck this weekend
awesome thread have any updated pics? or is it still in the paint shop thats insanely low i just love it
|
Re: "DOORED" my truck this weekend
Got the bed primed but I found some spots I didnt know about until I blasted it.:whine: Fixing those now and still trying to smooth the front clip welds down when time permits.
|
Re: "DOORED" my truck this weekend
Any updates on this bad@ss truck!!
|
Re: "DOORED" my truck this weekend
Sadly no... just bodywork. Relentless grinding, filling, and smoothing. I am going to buy stock in 3M for all the seam sealer I am going to use in the bed lol.:crazy:
|
Re: "DOORED" my truck this weekend
when you notch the cab for the driveshaft did you rebuilt the rear cab brace or just install the tunnel and weld it in? or would i even need to do that at all?
|
Re: "DOORED" my truck this weekend
Man, that looks better and better every time I see it.
I like the looks of the wicked low trucks when they are done right. I like the looks of stock trucks as well when done right. My truck is going bags so I can go low or not. That's one of the advantages of bags if you don't go extreme. Stock is cool, but if I feel like low and slow, just drop it and go! <edit> also the long beds don't look as cool when they are too low most of the time and I like my long bed. |
Re: "DOORED" my truck this weekend
I almost got the million pounds of welds on the bed floor smoothed out and getting it ready to get LINE-X sprayed. Anybody here got line-x ?
|
Re: "DOORED" my truck this weekend
Quote:
|
Re: "DOORED" my truck this weekend
XXL got a part number ?
|
All times are GMT -4. The time now is 12:58 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com