Re: Project: Bolt one on
Cool...progress!
|
Re: Project: Bolt one on
Looks like you went alittle heavy on the cutting of the pass. side floorboard:lol: Grendel should be happy!
|
Re: Project: Bolt one on
Quote:
Trying to save the section towards the front corner that rolls into the tranny cover mount, it's pretty pitted but looks solid enough so far. We'll see how it holds up to the blasting. It's a common rust area, carpet and/or floor matts that held water. |
Re: Project: Bolt one on
Quote:
|
Re: Project: Bolt one on
Quote:
Going to replace the body mount but after that it's time to start closing thing's up. |
Re: Project: Bolt one on
And yet another example of quality workmanship nears completion, good job! Saved one from the crusher...
Are you taking that last pc. out by the high hump or splicing it in? |
Re: Project: Bolt one on
Quote:
Not by a long shot. It's also far from completion. I still have stainless lines to run, a fuel tank to fabricate, doubler installation, cage fabrication, efi and vehicle harness to wire... all in all another 100 hours of work. It was easy to write checks for this portion of the project but there's far more to go. |
Re: Project: Bolt one on
I'll delete that part if it offends you;)
|
Re: Project: Bolt one on
Nice work. Gotta love getting one side closed up only to have to cut a big friggin' hole in the other side.... Are you going with the truck outer floor on this side too? Its a handy dandy piece. You'll have it knocked out in no time.
|
Re: Project: Bolt one on
Quote:
:waah: It's not even Kurt's fault this is taking as long as it does. My Brother in law, who I am building this for, takes forever to send funds. This project was supposed to be done by Christmas, 07. Now when I get this back, it's smack in the middle of the K30 conversion. |
Re: Project: Bolt one on
Quote:
|
Re: Project: Bolt one on
Quote:
:sumo: Heck, he even has the funds, it's the time that he doesn't have. |
Re: Project: Bolt one on
3 Attachment(s)
Passengers side inner rocker fit.
Started to work on installing the body mount thinking it'd be a good day, progress-wise only to find out it was the slip over type that was sent. Looked into using it but the fit was crap so I choose to order another one. Lots of other stuff to work on while it's being shipped. Started stripping/mudding the quarter for primer. When the weather permits, it's outside for blasting. |
Re: Project: Bolt one on
Gotta agree on the slip ons, saw it on another truck and didn't like them. Seems like your just encapsulating the rust...Nice work and progress!!
Lots of pics on the kick panel, pls. When you get into it... |
Re: Project: Bolt one on
3 Attachment(s)
Pushed it outside to finish cleaning up the pass. side quarter and get it in primer.
Got the pass. side floor pan down to 'close' but still waiting for the floor support to show up. |
Re: Project: Bolt one on
Nice bedside, no rust! what's up with that in a 1st gen.
|
Re: Project: Bolt one on
Quote:
|
Re: Project: Bolt one on
nice
|
Re: Project: Bolt one on
4 Attachment(s)
Primed and sealed.
Needs to be blocked out yet but it's progress. Remeber that 'extra' gas fill hole? ;) |
Re: Project: Bolt one on
Awesome Dude! Looks good!
More progress is a good thing. :cool: |
Re: Project: Bolt one on
Looking forward to seeing the progress from yesterday.
|
Re: Project: Bolt one on
Looking good whats the new completion date?
|
Re: Project: Bolt one on
Quote:
|
Re: Project: Bolt one on
5 Attachment(s)
Quote:
Got a lot checked off the list though. *Cab support installed *Inner rocker installed *Outer rocker fit and ready to go One piece left to do and it's already rough cut to size and shape so it should go quick. |
Re: Project: Bolt one on
5 Attachment(s)
More pics
|
All times are GMT -4. The time now is 07:54 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com