|
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
It's been a long time since I got back on this thing...but the following posts will be CURRENT....
- - ....back on it again....Here a teaser pic.... - - http://i44.tinypic.com/2rnd3pz.jpg - - The back-half is all done...more pics soon... :metal: |
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
What will be going on next will be the install of the awesome harness from M&H and the Ls7 engine harness. Stay tuned !!
|
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
looks good man!!
what did the Fat Mat set you back? |
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
I think we paid like $300 for 200 sq foot....pretty good deal I think...
Anyway, here are more pics: - - I am back with MORE progress pics....finished up the FatMat last week...and started on the harness today. The shop wall took longer than expected, and we are 80% organized, so I was able to get back on the Vette...Check it out !!! - - http://i42.tinypic.com/2z3v47o.jpg - http://i39.tinypic.com/ixgjmp.jpg - http://i42.tinypic.com/t02pm9.jpg - I might do this area later with mat.... - http://i42.tinypic.com/29y5aaf.jpg - http://i44.tinypic.com/13zzatw.jpg - http://i40.tinypic.com/35ks8c8.jpg - http://i43.tinypic.com/a2pzet.jpg - http://i41.tinypic.com/i6bgxh.jpg - http://i42.tinypic.com/345f0vb.jpg - http://i42.tinypic.com/jsj0px.jpg - |
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
I started on the harness today....laying it out and started from the rear, running the tail harness, antenna and fuel pump wires:
- - http://i42.tinypic.com/2vknqcl.jpg - http://i40.tinypic.com/b5kwfa.jpg - http://i39.tinypic.com/2j0gjzq.jpg - http://i39.tinypic.com/2q9ib1z.jpg - This M&H harness is a nice piece.....Everything is correct... - http://i41.tinypic.com/k9gqaa.jpg - http://i42.tinypic.com/35d84ds.jpg - http://i39.tinypic.com/2cg07wo.jpg - http://i41.tinypic.com/2dbts2w.jpg - http://i39.tinypic.com/282e35u.jpg - http://i43.tinypic.com/24ne79g.jpg |
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
http://i43.tinypic.com/aoxkbl.jpg
- Besides the Fat-Mat...I even installed the stock insulation: - http://i44.tinypic.com/2u90dvl.jpg - http://i41.tinypic.com/2i1gtit.jpg - http://i41.tinypic.com/rjh55y.jpg - http://i39.tinypic.com/288xyxe.jpg - http://i43.tinypic.com/if9xko.jpg - http://i41.tinypic.com/52exid.jpg - http://i40.tinypic.com/jpu1di.jpg - http://i41.tinypic.com/2vklw7m.jpg |
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
nice!!
|
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
Coming along dude! I actually enjoy wiring. A nice harness makes a big difference and is worth the extra dough every time.
|
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
I hear you on the wiring....I have wired many rides for people, and made good money doing it. People have some kind of "fear" when it comes to wiring..but I enjoy it as well.
- - At this point I ended up diassembling, and 'rebuilding' the heater box. When I drilled out the rivets and removed the cover, I realized the flap seals were still soft and in good shape, but they were replaced anyway. :metal: |
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
My next step was to rebuild the heater box and pedal assemblies. The kit from ZIP came with all the seals, gaskets, and aluminum rivets for the heater box.....and of course a new core:
- - http://i41.tinypic.com/w1zi9k.jpg - http://i43.tinypic.com/30uz91d.jpg - http://i44.tinypic.com/2le2gd1.jpg - http://i40.tinypic.com/a0w87d.jpg - http://i42.tinypic.com/2w4fng3.jpg - http://i39.tinypic.com/2ng4sq1.jpg - Old Core: - http://i40.tinypic.com/20pbi0x.jpg - http://i41.tinypic.com/2cf7bpx.jpg - http://i44.tinypic.com/2a6pnw2.jpg - Internal flapper seal glue and clamped overnight: - http://i40.tinypic.com/30ro00m.jpg - |
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
The core retainer clip was broken, so instead of waiting for UPS, I turned my MIG down reaallllly low and tacked it back together:
- http://i44.tinypic.com/ayvtzc.jpg - http://i43.tinypic.com/10diah3.jpg - http://i44.tinypic.com/23k4u3d.jpg - http://i39.tinypic.com/23vg402.jpg - All sealed and riveted back together: - http://i41.tinypic.com/2rwwbyh.jpg - Back in car..temporarily held with wingnuts....might have to modify the cover to clear the engine: - http://i39.tinypic.com/2zsmpz6.jpg |
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
chief, in this pic, are you putting a heat shield over the starter or is that plenty of room to not have to worry about it???
http://i29.tinypic.com/2weh25f.jpg |
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
Glad you brought that up....
The entire exhaust system will be removed and sent out for Jet-Hot coating. This will slightly reduce some temps....but to answer your question, Yes in certain spots I will be using some insulators. Near the starter will be one, in the back near the fuel lines, etc. I might relocate the regulator as well. I think the starter would be fine...these newer starters are more forgiving that the old school ones....but just for fun, I'll do it anyway.;) |
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
Here the pedal assembly rebuild pics:
- - I painted the mounts after a bead blast: - http://i41.tinypic.com/14v1ypy.jpg - http://i43.tinypic.com/125ow0y.jpg - The pedal, since they show, were powdered gloss black: - http://i43.tinypic.com/2h8cuia.jpg - Yes, I'm somewhat organized... - http://i39.tinypic.com/142bite.jpg - http://i39.tinypic.com/2lm4fns.jpg - http://i41.tinypic.com/wix1k2.jpg - http://i44.tinypic.com/282ke3b.jpg - A new clutch interlock switch...just in case. Actually the OG was fine, but lets not take a chance... - http://i40.tinypic.com/muex36.jpg |
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
http://i40.tinypic.com/xbg19d.jpg
- http://i44.tinypic.com/mj3hok.jpg - http://i40.tinypic.com/29xhhs2.jpg - http://i44.tinypic.com/102nno0.jpg - http://i44.tinypic.com/6r2gc2.jpg - http://i43.tinypic.com/2qm3w2t.jpg - http://i44.tinypic.com/xf9gyt.jpg - http://i43.tinypic.com/2hzlefl.jpg - http://i41.tinypic.com/skvpjl.jpg - http://i42.tinypic.com/29wpb4o.jpg - - - More soon.... |
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
how do you like the FAT MAT? looks nice... Is it really thick? (or fat I guess?)
|
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
It is some nice stuff...works great and adheres really well (to your clothes, shoes, etc too)
It's kinda like me....."IT's FAT ENOUGH !!!" :lol: |
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
Quote:
|
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
Koooool Project!!!!
|
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
OK...it's been a while, so I'm back with a little more progress.
When I left off, I mentioned we had a problem with the B-Cool radiator.(or mabey I didn't mention:lol:) The passenger side key-stocks were welded to the radiator 3/8" off. This prevented the radiator from dropping into the lower mount and the top mount from sliding on. A call to B-Cool, got the radiator picked up from my shop by UPS the next day. It was about a 2 1/2 week turn-around...not too bad. They moved the mounts over, repolished, and sent it back. I mentioned to pops to keep it raw, but he insisted on it being polished. Nice looking rad, though !! - - http://i41.tinypic.com/2z4cknq.jpg - http://i41.tinypic.com/24pdzxy.jpg - http://i39.tinypic.com/24q3e5u.jpg - If yoou wondered why my pics are so $hitty...this is what I'm using...nice shine though !! :lol: - - http://i40.tinypic.com/qqy5a0.jpg |
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
In addition to the radiator....we had the Oil tank and the Borla mufflers fully pollished. The mufflers we'll see later. Here's the tank pics:
- - Before reference pics: - http://i40.tinypic.com/5l9myh.jpg - http://i43.tinypic.com/sg0svl.jpg - http://i39.tinypic.com/1zx5jpd.jpg - http://i41.tinypic.com/15s6328.jpg - The polishing was about 2 weeks out, so I got some other things done...like finally put on the last two fittings.... - http://i39.tinypic.com/2mxk0li.jpg - http://i40.tinypic.com/3346vt0.jpg - http://i40.tinypic.com/2qvsbok.jpg - |
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
Here it is...all shined up !!!
- - http://i43.tinypic.com/10ws3gm.jpg - http://i44.tinypic.com/4tmyxl.jpg - This is my favorite pic..she giving me the ol' : "YOU BETTER NOT BE TRYING TO GET A BOOB SHOT, OR I'LL THROW THIS TANK AT YOUR HEAD!!" look.....:lol: - http://i40.tinypic.com/fpask3.jpg - And, as expected, it fit like a glove !! This is due to all the up and down of the body during the mock up !! - http://i44.tinypic.com/10p6kci.jpg - http://i44.tinypic.com/21ki2b6.jpg - http://i40.tinypic.com/a2rz9u.jpg - http://i40.tinypic.com/309ou2d.jpg - http://i41.tinypic.com/2d13hwm.jpg - http://i41.tinypic.com/3493wqc.jpg |
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
We had ordered larger front and rear sway-bars...and had them coated silver for a little more contrast.
After receiving them from the coaters, silly me realized I CANNOT run the rear bar due to the fact where I installed the fuel system. Now I have a brand new, coated rear bar kit...FOR SALE !!:lol: (as well as the stock, coated front bar, with prothane links) - - http://i44.tinypic.com/2mcsffr.jpg - http://i39.tinypic.com/mud2j7.jpg - http://i43.tinypic.com/rauct3.jpg - http://i39.tinypic.com/2csi7a9.jpg - http://i40.tinypic.com/m8cv41.jpg - Stock front bar, and rear bar kit..unuseable..:( - http://i43.tinypic.com/23s91s0.jpg - http://i39.tinypic.com/8y8d8l.jpg |
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
The radiator and fans are in. I had to trim the top fan mount a little, to get it to slide over to the passenger side. It was right up against the a-arm washer...and there no shims in it yet !!! So hopefully, it'll clear when alignment time comes...:eek:
- http://i41.tinypic.com/29vayp1.jpg - http://i41.tinypic.com/wl4uoh.jpg - http://i40.tinypic.com/1zld66c.jpg - http://i44.tinypic.com/2remzab.jpg - http://i42.tinypic.com/34s1fk3.jpg - I need to touch this polish up a little.... - http://i40.tinypic.com/24doc2s.jpg |
Re: PROJECT "Z069" - LS7 powered '69 Stingray....
When we first picked up the car, the master was changed...so its been sitting on the shelf.....so I bead-blasted it and just painted it a "sand-blasted metal look" color....;)
- - http://i43.tinypic.com/rvypeb.jpg - http://i43.tinypic.com/23wac04.jpg - http://i39.tinypic.com/2moaxip.jpg - Put the rear on stands, removed the wheels and bled the entire system... - http://i43.tinypic.com/2vjtz06.jpg |
| All times are GMT -4. The time now is 02:56 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com