The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 5 of 41 1234 5 67891015 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Boss 338 Wheels **GROUP BUY** (https://67-72chevytrucks.com/vboard/showthread.php?t=393027)

Wildstreak 03-22-2010 07:41 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by Sublvr72 (Post 3875569)
I'm collecting orders this week, and I will place them with american eagle by friday.

Future orders are possible, just need to collect a few before I go down there to have them shipped.
when could I expect shipment if i jump in on this? not really worried about it just would like to know an eta....

Sublvr72 03-22-2010 08:57 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by Wildstreak (Post 3875903)
when could I expect shipment if i jump in on this? not really worried about it just would like to know an eta....

I'm going down to place the order Friday morning, so all orders must be in by Thursday before 3:00PM PST if you want them to ship by next week.

Wildstreak 03-22-2010 09:00 PM
Re: Boss 338 Wheels **GROUP BUY**
 
ok after thinking about it, Im in, I just have to transfer the money in my account. Ill be ready to pay tomorrow. Do i just send you my info via PM?

k5hart 03-22-2010 09:08 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Just got my order in! Can't wait to get them.:metal:

So maybe this should be a different thread....but who has good tire deals??

Sublvr72 03-22-2010 09:31 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by Wildstreak (Post 3876056)
ok after thinking about it, Im in, I just have to transfer the money in my account. Ill be ready to pay tomorrow. Do i just send you my info via PM?

order online, call it in, pm, or email works

Wildstreak 03-22-2010 09:52 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by Sublvr72 (Post 3876165)
order online, call it in, pm, or email works
cool man, Ill just send you the info through PM tomorrow. I couldn't pass this up, what I save on what I was going to spend of c5's almost pays for my lowering kit :)

edit: Oh yea..... Id like combo #4 please lol
2-20x8.5 2-20x10 grey

TyKby2 03-22-2010 10:50 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Plan on pulling the trigger tomorrow when I have the funds in the bank account.

darthwall 03-22-2010 10:59 PM
Re: Boss 338 Wheels **GROUP BUY**
 
im in just paid for them 18x8 and 20x10 in grey

Fastest32 03-23-2010 01:05 AM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by Sublvr72 (Post 3875815)
attn all!

18x8 and 18x9.5 chrome are in stock and ready to ship!
So does that mean the 20's are ready to ship too? I thought they were gonna do the chrome 20's first. Mine are on order from the San Antonio warehouse. Where is evryone else getting theirs from?

Sublvr72 03-23-2010 03:23 AM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by Fastest32 (Post 3876672)
So does that mean the 20's are ready to ship too? I thought they were gonna do the chrome 20's first. Mine are on order from the San Antonio warehouse. Where is evryone else getting theirs from?

No Chrome 20's yet, just 18's

Fastest32 03-23-2010 07:54 AM
Re: Boss 338 Wheels **GROUP BUY**
 
That AE blog said the 20's would be the first ones out. I guess not.

70k52wd 03-23-2010 10:46 AM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by lolife99 (Post 3874731)
The 20x8.5's will be fine for the front, if they address the "hub fitment issues".
The rear will need spacers.

Everyone is so "blinded" by the cheap price,... that they just forget all the other stuff.
Most people running Coys 20x10's have a choice of 5" or 5.5" backspace.
These wheels have a 6.225" backspace.

Get out your tape measures and check out your trucks for yourself.
I was wondering how long it would take for rear b/s questions to come up.:lol:

And this whole time, I thought the b/s offered was custom b/s up to 6.225...
I guess they would cost 700+ a rim if that were the case.

TyKby2 03-23-2010 10:48 AM
Re: Boss 338 Wheels **GROUP BUY**
 
Sublvr72 I sent you a PM asking a couple of Q's about this deal and your website.

brossow 03-23-2010 10:55 AM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by 70k52wd (Post 3877107)
I was wondering how long it would take for rear b/s questions to come up.:lol:

And this whole time, I thought the b/s offered was custom b/s up to 6.225...
I guess they would cost 700+ a rim if that were the case.
The good news is they're a direct bolt-on for your '00 GMC. :D

Fastest32 03-23-2010 11:30 AM
Re: Boss 338 Wheels **GROUP BUY**
 
Wait, they don't fit the back without spacers either? Does this apply to the 73-87's I thought it was just the front that wouldn't fit.

brossow 03-23-2010 11:36 AM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by Fastest32 (Post 3877176)
Wait, they don't fit the back without spacers either? Does this apply to the 73-87's I thought it was just the front that wouldn't fit.
Measure your truck and compare it with the offset of these wheels. Pre-'70 will almost certainly require a spacer. '71-87 rear ends are 3/4" wider on each side (1.5" total) and may not need a spacer, or may only require a thin one rather than the full adapter-style spacer. Only you can determine for sure if you'll need a spacer.

Everyone needs to be clear: the wheels were retooled for a hub fitment issue, not a backspacing problem. If the backspacing was wrong for your application before, it'll be wrong for your application now. Some people used spacers in the past as a workaround for the fitment issue with the front hub, not because it was needed for backspacing.

Brent

SCOTI 03-23-2010 12:27 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by brossow (Post 3877121)
The good news is they're a direct bolt-on for your '00 GMC. :D
00 GM's are 6-lug.

Quote:
Measure your truck and compare it with the offset of these wheels. Pre-'70 will almost certainly require a spacer. '71-87 rear ends are 3/4" wider on each side (1.5" total) and may not need a spacer, or may only require a thin one rather than the full adapter-style spacer. Only you can determine for sure if you'll need a spacer.

Everyone needs to be clear: the wheels were retooled for a hub fitment issue, not a backspacing problem. If the backspacing was wrong for your application before, it'll be wrong for your application now. Some people used spacers in the past as a workaround for the fitment issue with the front hub, not because it was needed for backspacing.
I can't run more than 5.50"BS on my 74. Anything more & it will rub the inner wheel tub/mounting hardware.

brossow 03-23-2010 12:37 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by SCOTI (Post 3877263)
00 GM's are 6-lug.
D'OH! Just snap one off. :lol:

Is it '88-98 that were 5-lug?

SCOTI 03-23-2010 12:39 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by brossow (Post 3877278)
D'OH! Just snap one off. :lol:

Is it '88-98 that were 5-lug?
Correct.

brossow 03-23-2010 12:52 PM
Re: Boss 338 Wheels **GROUP BUY**
 
This is pretty much off-topic, but is there a thread anywhere that lists the different rear-end widths for the different years? I've searched the forums and Google with no success. Sure would be nice to have readily available.

Wildstreak 03-23-2010 12:59 PM
Re: Boss 338 Wheels **GROUP BUY**
 
what tire size is everyone goin to run on their rear rims?

Security guy 03-23-2010 01:13 PM
Re: Boss 338 Wheels **GROUP BUY**
 
I just had to get in on this thread. I can tell its going to be another 20 page thread. I'm going to try and order a set on thursday. I was trying to hold out until we could see a truck with the new wheels on. Does any one know for sure if there will be another order placed next week?

TyKby2 03-23-2010 01:28 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by Wildstreak (Post 3877321)
what tire size is everyone goin to run on their rear rims?
When I get my set I plan on running 245/40/18's on front and 295/35/18's on the rear. I would probly run about the same with the 20's aswell.

SCOTI 03-23-2010 02:03 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by TyKby2 (Post 3877375)
When I get my set I plan on running 245/40/18's on front and 295/35/18's on the rear. I would probly run about the same with the 20's aswell.
Those will be short. I would recommend a 245-45-18 (26" tall) & 295-40-20 (29" tall).

AusTx68 03-23-2010 02:29 PM
Re: Boss 338 Wheels **GROUP BUY**
 
I sure hope someone posts some pics once they get their wheels. I'm curious how the 20x10s look with an adapter in place.


All times are GMT -4. The time now is 04:03 PM.
Page 5 of 41 1234 5 67891015 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com