The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 5 of 32 1234 5 67891015 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Vendors Marketplace (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=195)
-   -   Vintage Air Sale (https://67-72chevytrucks.com/vboard/showthread.php?t=440037)

Scottshotrods 10-13-2011 03:10 PM
Re: Vintage Air Sale
 
Quote:
Originally Posted by yank (Post 4951443)
Justin looking to put A/C in my truck over the winter.Looking for a quote on SureFit kit 941171 with a R4 compressor bracket and a serpintine pulley compressor. Might go with the bulk head fitting since my firewall has been smoothed.
Mike Palmiter
P/M sent

Justin

67lowered 10-15-2011 04:13 PM
Re: Vintage Air Sale
 
Justin

P/M sent for surefit 941170. Let me know if you need any other info

thanks

Scottshotrods 10-15-2011 04:28 PM
Re: Vintage Air Sale
 
Quote:
Originally Posted by 67lowered (Post 4954989)
Justin

P/M sent for surefit 941170. Let me know if you need any other info

thanks
Pm sent

Justin

schwoch1 10-17-2011 12:25 AM
Re: Vintage Air Sale
 
Looking for pricing on Gen IV system for my '71 GMC. Factory air truck, but will not need lines and compressor, using compressor on LS1 engine, which means I am on my own as far as lines are concerned!!!

Looking forwards to your response!!!

Mike

Scottshotrods 10-17-2011 10:36 AM
Re: Vintage Air Sale
 
Quote:
Originally Posted by schwoch1 (Post 4957413)
Looking for pricing on Gen IV system for my '71 GMC. Factory air truck, but will not need lines and compressor, using compressor on LS1 engine, which means I am on my own as far as lines are concerned!!!

Looking forwards to your response!!!

Mike
I sent you a p/m

Justin
(805)485-0382

dean jendro 10-20-2011 10:59 AM
Re: Vintage Air Sale
 
Justin,
Need a quote for a Gen4 system for my '64' Chev. I do not need the compressor as I will be using the stock compressor on my 5.3LS motor. I went this direction so I could retain all the stock LS serpentine system.
Dean

Scottshotrods 10-20-2011 12:00 PM
Re: Vintage Air Sale
 
Quote:
Originally Posted by dean jendro (Post 4963592)
Justin,
Need a quote for a Gen4 system for my '64' Chev. I do not need the compressor as I will be using the stock compressor on my 5.3LS motor. I went this direction so I could retain all the stock LS serpentine system.
Dean
P/m sent

Justin

Scottshotrods 10-20-2011 12:45 PM
Re: Vintage Air Sale
 
Vinatge air just released there sure fit kit for the 64-66 chevy trucks and this is a 100% bolt in and this is in there GEN IV KIT THE BEST AC KIT ON THE MARKET!!!!!!!!!!!!!

Justin

mighty_mike015 10-22-2011 07:21 AM
Re: Vintage Air Sale
 
Just a piece of information to you LS swap guys. Vintage Air says that the LS compressors should not be used with there kits because they are variable displacement compressors and will burn up/fail prematurely. I have not personally experience this, but want to pass on what I have heard, so you aren't swapping out compressors a year down the road. I'm working on scanning all the necessary components into ProE and designing a bolt in bracket system for the serpentine Sanden compressor that Vintage Air kits use. Hoping to have a model worked up in a couple weeks.

dean jendro 10-22-2011 08:46 AM
Re: Vintage Air Sale
 
Quote:
Originally Posted by mighty_mike015 (Post 4966845)
Just a piece of information to you LS swap guys. Vintage Air says that the LS compressors should not be used with there kits because they are variable displacement compressors and will burn up/fail prematurely. I have not personally experience this, but want to pass on what I have heard, so you aren't swapping out compressors a year down the road. I'm working on scanning all the necessary components into ProE and designing a bolt in bracket system for the serpentine Sanden compressor that Vintage Air kits use. Hoping to have a model worked up in a couple weeks.
Never heard this one before. Not being an air conditioning expert I don't know how to respond. I know lots of Silverado LS owners who don't have any troubles with the stock compressor. What about the Vintage Air system makes them fail prematurely?

mighty_mike015 10-22-2011 09:38 PM
Re: Vintage Air Sale
 
I'm not an AC expert either, but I'm going to guess since they are variable displacement, the stock LS computer will control the compressor stroke or compression somehow depending on the load. The Vintage Air probably just runs them full bore because they don't have a computer to control it. I really don't know, that's just my interpretation of it. Anyways, I originally learned this from the Vintage Air Q and A during the 48hourcamaro build at Ridetech. I've tried to find the video, but no success so far.

Mike Bradbury 10-22-2011 10:46 PM
Re: Vintage Air Sale
 
Scott I'll send you a PM for a quote on a complete system for my '69
Mike

Scottshotrods 10-22-2011 11:41 PM
Re: Vintage Air Sale
 
Quote:
Originally Posted by Mike Bradbury (Post 4968017)
Scott I'll send you a PM for a quote on a complete system for my '69
Mike
p/m sent
Justin

Scottshotrods 10-23-2011 10:48 PM
Re: Vintage Air Sale
 
In referance on LS comp should not be used with vintage air kits this is a new one for myself.I have sold several dozens of ac kits with customers running ls motors with factory ac comp on them and I have never had one customer call me back and say there was a problem.

On a other note we have a customers hotrod we installed the new gen IV in with a ls motor and factory comp on the motor and this car is driven 5 days a week and he has never had a problem the only thing he complained about was the ac blows to cold for him.But then he said when he did not have it in his car his wife would not ride with him anywhere.If he was having a problem I would be the first to know about it he tells me everthing about his car

Justin

PGSigns 10-24-2011 08:20 PM
Re: Vintage Air Sale
 
Justin
I tried to find some info on the GenIV for the 64 to 66 trucks with no luck. To you have any information you can share or an idea when VA is going to post it on their website?4
Thanks
Jimmy

Scottshotrods 10-24-2011 10:36 PM
Re: Vintage Air Sale
 
Here is some more info to all who has a ls motor in there truck and the ones who are running the factory comp

We do not recommend using the ls factory compressors off of the camaros,gto's or vettes because they are a variable displacement type compressor and our epansion valve metered system requires a fixed displacement type compressor.

The truck ls motors are the only motors that come with a fixed displacement type compressor and this will work fine with no problems.

Justin

Scottshotrods 10-24-2011 10:38 PM
Re: Vintage Air Sale
 
For the gen IV sure fit kit for the 64-66 trucks they are all done and ready to ship and Vintage air is doing there best to have the instuctions uploaded to there site this week

Justin

dean jendro 10-25-2011 08:40 AM
Re: Vintage Air Sale
 
Quote:
Originally Posted by Scottshotrods (Post 4971776)
Here is some more info to all who has a ls motor in there truck and the ones who are running the factory comp

We do not recommend using the ls factory compressors off of the camaros,gto's or vettes because they are a variable displacement type compressor and our epansion valve metered system requires a fixed displacement type compressor.

The truck ls motors are the only motors that come with a fixed displacement type compressor and this will work fine with no problems.

Justin
Thanks for this info Justin. My whole setup is from a 2003 Silverado so it should work out fine.
Dean

dean jendro 10-25-2011 08:42 AM
Re: Vintage Air Sale
 
Quote:
Originally Posted by Scottshotrods (Post 4971776)
Here is some more info to all who has a ls motor in there truck and the ones who are running the factory comp

We do not recommend using the ls factory compressors off of the camaros,gto's or vettes because they are a variable displacement type compressor and our epansion valve metered system requires a fixed displacement type compressor.

The truck ls motors are the only motors that come with a fixed displacement type compressor and this will work fine with no problems.

Justin
Quote:
Originally Posted by Scottshotrods (Post 4971785)
For the gen IV sure fit kit for the 64-66 trucks they are all done and ready to ship and Vintage air is doing there best to have the instuctions uploaded to there site this week

Justin
Thanks, Justin
I will wait to read the install instructions to make certain I'm not missing something then I'll call you to order.
Dean

mighty_mike015 10-25-2011 06:12 PM
Re: Vintage Air Sale
 
Thanks for the verification Justin.

boonedogs72 10-28-2011 10:31 AM
Re: Vintage Air Sale
 
looking for a price on a complete kit for 72 blazer non factory air and it has a serp setup from 95 chevy.

Scottshotrods 10-30-2011 11:10 AM
Re: Vintage Air Sale
 
Quote:
Originally Posted by boonedogs72 (Post 4978145)
looking for a price on a complete kit for 72 blazer non factory air and it has a serp setup from 95 chevy.
P/m sent

Justin

Scottshotrods 11-01-2011 09:36 PM
Re: Vintage Air Sale
 
64-66 surefit instructions are all up at vintage air now take a look at them and let me know if you have any questions.

Justin

PGSigns 11-02-2011 07:28 AM
Re: Vintage Air Sale
 
Looked like a nice setup. Gotta wait a while bought a 03 duelly Monday and need to recover a bit.
Jimmy

dean jendro 11-02-2011 07:49 PM
Re: Vintage Air Sale
 
Justin,
Great talking with you today. Can't wait to see my GenIV system for my "64" Chevy short step project. It should make a sweet ride when done.
Dean


All times are GMT -4. The time now is 12:35 PM.
Page 5 of 32 1234 5 67891015 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com