The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)
-   -   NE 65 Chevy 1/2 66 Chevy 3/4 Part Out (https://67-72chevytrucks.com/vboard/showthread.php?t=692835)

paulspickupparts 01-28-2016 10:56 PM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
Quote:

Originally Posted by diver (Post 7465068)
hello,need 1,will take 2 bezel nut for 65 light switch dash .thanks butch and one for wiper 2 speed

Hi Butch . I will look tomorrow to see if I have them.

diver 01-29-2016 03:41 PM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
and a wiper switch bezel 1 or 2 thanks radio came today she is a nice one

Sick5 01-29-2016 04:04 PM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
Quote:

Originally Posted by paulspickupparts (Post 7465466)
Here are some pics of the regulators. The splines are good and the rollers are good . I rolled them up and down several times and they work good. The do have some paint loss and some surface rust but are good used parts. Thanks

ok paypal#???

paulspickupparts 01-30-2016 12:20 PM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
Quote:

Originally Posted by Sick5 (Post 7466162)
ok paypal#???

Paypal is fine . Sent PM with payment information.

paulspickupparts 02-01-2016 11:09 AM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
Quote:

Originally Posted by paulspickupparts (Post 7465468)
Hi Butch . I will look tomorrow to see if I have them.

Butch , right now I do not have any of the bezels. I have been incuding them when I sell a headlight switch or choke cable. Thanks

Sick5 02-01-2016 05:02 PM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
$$ sent

paulspickupparts 02-04-2016 04:16 PM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
Quote:

Originally Posted by paulspickupparts (Post 7462630)
Remove this dash today. One of the nice ones I have had . Nice radio area. $100 plus shipping.

No response from softballnrd27 . Dash for sale

Slambone 02-12-2016 02:48 PM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
How much for the gauge cluster? I can do paypal.

paulspickupparts 02-12-2016 03:26 PM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
5 Attachment(s)
I took this one out. Speedometer works, good bezel housing, lense has a little loss to some of the lettering, few bulbs missing in the hardware . $60 plus shipping. Thanks

diver 02-12-2016 07:28 PM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
hi Paul,had radio put in today put new recone speaker with it and plays like new up and down stations with no antenna in atlanta area.thanks

paulspickupparts 02-12-2016 11:54 PM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
Good deal. It was the best one I had at the time. Thanks again.

sharkskinman 02-16-2016 12:17 AM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
2 Attachment(s)
What about this part
And possibly the metal part that's attached to the frame

paulspickupparts 02-16-2016 12:58 AM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
Quote:

Originally Posted by diver (Post 7483921)
hi Paul,had radio put in today put new recone speaker with it and plays like new up and down stations with no antenna in atlanta area.thanks

Butch , not sure if you still need it but I have a headlight switch bezel . Shows a little wear. I have a bezel from a choke cable. I will check to see if it is the same as a wiper bezel. Thanks

paulspickupparts 02-16-2016 01:01 AM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
Quote:

Originally Posted by sharkskinman (Post 7487792)
What about this part
And possibly the metal part that's attached to the frame

I should have but will need to know what the model and year of your truck is. Also how much of the frame you would need . I can cut larger if you need. Thanks

sharkskinman 02-16-2016 01:24 AM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
65 swb stepside
Original 230 and Muncie? non syncro 3 on tree
I would think I can drill out the old and weld in the new so I would think all I need is width of connecting metal
But can cut off and weld directly on

Going to look in that area and see if there is anything else broke
(wheel came off n under truck at 25mph and lifted probably 5-6' up and came down hard cracking the drum) now sits low on that corner

paulspickupparts 02-16-2016 03:07 AM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
Quote:

Originally Posted by sharkskinman (Post 7487848)
65 swb stepside
Original 230 and Muncie? non syncro 3 on tree
I would think I can drill out the old and weld in the new so I would think all I need is width of connecting metal
But can cut off and weld directly on

Going to look in that area and see if there is anything else broke
(wheel came off n under truck at 25mph and lifted probably 5-6' up and came down hard cracking the drum) now sits low on that corner

Ok , let me know what you need . I should be able to get you fixed up.

Thanks

inkfamous13 02-16-2016 03:34 AM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
Looking for complete from crossmember wheel to wheel and a coil spring rear end 6 lug c10 and i need choke knob, pass side long bed thick top molding, both pass moldings and bottom cab drivers lil moulding. And need arm rests and drivers vent knob. Ive got a c20 ive gotta get rid of these 8 lugs and super low geared rear. Got a nv-540 od 5 spd trans and still cant top 60 on highway. My number is 4426009184 txt me just say truck parts online

paulspickupparts 02-16-2016 01:31 PM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
Quote:

Originally Posted by inkfamous13 (Post 7487905)
Looking for complete from crossmember wheel to wheel and a coil spring rear end 6 lug c10 and i need choke knob, pass side long bed thick top molding, both pass moldings and bottom cab drivers lil moulding. And need arm rests and drivers vent knob. Ive got a c20 ive gotta get rid of these 8 lugs and super low geared rear. Got a nv-540 od 5 spd trans and still cant top 60 on highway. My number is 4426009184 txt me just say truck parts online

I have the crossmember and coil spring rear end. The biggest problem ends up being shipping. It usually ends up killing the deal. I do not think my bed moldings are good enough. Thanks Paul

jdl71 03-05-2016 12:26 AM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
Do you have a wiper switch? Don't need bezel, just the switch. Any more radios?

paulspickupparts 03-05-2016 06:18 PM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
5 Attachment(s)
Quote:

Originally Posted by jdl71 (Post 7510001)
Do you have a wiper switch? Don't need bezel, just the switch. Any more radios?

I sold the radio shown. Here is nother one that I took out of a different truck . Looks good but untested. The speaker would have to be reconed. Nice bracket. Original knobs. The wiring has been cut to the speaker . Condition as shown $125 . $15 insured shipping.

Currently sold out of wiper switches.
Thanks

paulspickupparts 03-05-2016 06:21 PM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
1 Attachment(s)
One more pic.

jdl71 03-05-2016 08:00 PM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
Pass for now on the radio. Keep me in mind for a wiper switch if you run across one. Thanks!

roll_the_dice 03-07-2016 12:18 PM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
Do you still have the gauge cluster for sale? Price shipped to 31406 please. Thanks

paulspickupparts 03-07-2016 01:02 PM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
Quote:

Originally Posted by jdl71 (Post 7510853)
Pass for now on the radio. Keep me in mind for a wiper switch if you run across one. Thanks!

I looked at more trucks I have . I have a couple of single speed wiper switches but do not have any two speeds right now. Thanks

paulspickupparts 03-07-2016 01:05 PM

Re: 65 Chevy 1/2 66 Chevy 3/4 Part Out
 
Quote:

Originally Posted by roll_the_dice (Post 7513027)
Do you still have the gauge cluster for sale? Price shipped to 31406 please. Thanks

The gauge cluster shown has been sold . I have others . Price varies according to condition. I have started breaking them down and selling bezels, speedo odometer gauges seperately as they seem to sell better that way. Clusters run from $60-$100 depending on condition and with or without harness . Thanks


All times are GMT -4. The time now is 07:06 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com