The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 5 of 12 1234 5 678910 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Suspension Marketplace (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=210)
-   -   1960-1972 Lowering Block U bolts (https://67-72chevytrucks.com/vboard/showthread.php?t=454824)

way2lo2 01-18-2013 10:07 AM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by CC69Rat (Post 5825057)
Boris - Can I please order some 1.5" lowering blocks and 3 degree shims? I have ubolts, just need the blocks and shims shipped to 37312. Thanks.
sorry, I now only have 1" and 2", we don't offer angle shims

62 Bowtie 01-22-2013 03:04 PM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by way2lo2 (Post 4871924)
your shocks are still going to bottom out if the rear axle doesn't hit something first. $65 shipped
So as it turns out i have an X frame and frame hits trail arms do you know if the blocks will give me more clearence and allow the rear to drop more shocks aint the problem and i still have room in the rear notch. Did you have blocks on the 60-61 Apache? Thanks, Tony

way2lo2 01-22-2013 05:27 PM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by 62 Bowtie (Post 5835437)
So as it turns out i have an X frame and frame hits trail arms do you know if the blocks will give me more clearence and allow the rear to drop more shocks aint the problem and i still have room in the rear notch. Did you have blocks on the 60-61 Apache? Thanks, Tony
yes, I had a deep notch and 2" blocks in the 61

62 Bowtie 01-23-2013 02:32 AM
Re: 1960-1972 Lowering Block U bolts
 
So did they give you more drop ? Were you useing stock trail arms sorry dont mean to be a pita just want to be sure before i order :metal:

way2lo2 01-23-2013 10:02 AM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by 62 Bowtie (Post 5837061)
So did they give you more drop ? Were you useing stock trail arms sorry dont mean to be a pita just want to be sure before i order :metal:
yes, they drop it 2" inches, MY CHASSIS HAD THE ROOM TO GO 2" LOWER

62 Bowtie 01-25-2013 09:50 PM
Re: 1960-1972 Lowering Block U bolts
 
PM sent brotha ordering the blocks and bolts :metal:

62 Bowtie 01-31-2013 10:24 PM
Re: 1960-1972 Lowering Block U bolts
 
got the blocks today:metal: thanks Boris

way2lo2 02-01-2013 09:44 AM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by 62 Bowtie (Post 5859348)
got the blocks today:metal: thanks Boris
great, enjoy my friend.

Cocky72 02-13-2013 08:41 PM
Re: 1960-1972 Lowering Block U bolts
 
Payment sent!
Posted via Mobile Device

buckstoy 02-15-2013 11:32 AM
Re: 1960-1972 Lowering Block U bolts
 
Hello I need the complete 2 inch kit sent to 39047, do you still have these available?

shawno72 03-11-2013 03:16 PM
Re: 1960-1972 Lowering Block U bolts
 
How much for a set of u bolts for 2" blocks?

way2lo2 03-11-2013 06:24 PM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by shawno72 (Post 5940368)
How much for a set of u bolts for 2" blocks?
sent a PM

msgdsrf 03-13-2013 12:21 PM
Re: 1960-1972 Lowering Block U bolts
 
1" in stock? Still at $64.95? I'll take a set (bolts too).

Let me know and I'll Paypal you

way2lo2 03-13-2013 12:38 PM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by msgdsrf (Post 5944524)
1" in stock? Still at $64.95? I'll take a set (bolts too).

Let me know and I'll Paypal you
sent a pm

rin68 03-13-2013 11:27 PM
Re: 1960-1972 Lowering Block U bolts
 
Do you have a set of 2" block and u-bolts available? Please send a PM with shipping to 61611. Thanks

way2lo2 03-14-2013 08:10 AM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by rin68 (Post 5945969)
Do you have a set of 2" block and u-bolts available? Please send a PM with shipping to 61611. Thanks
sent you a PM

rin68 03-14-2013 07:13 PM
Re: 1960-1972 Lowering Block U bolts
 
PM may not have gone through - do not see one in my inbox

Also - I assume you are the same way2lo2 selling these on ebay?

way2lo2 03-14-2013 07:29 PM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by rin68 (Post 5947498)
PM may not have gone through - do not see one in my inbox

Also - I assume you are the same way2lo2 selling these on ebay?
yep, same one as eBay

67_ShortFleet 04-03-2013 12:37 PM
Re: 1960-1972 Lowering Block U bolts
 
Interested in bolts for some 1.5 inch blocks I have. Are they still avaliable? $34.90 right?

way2lo2 04-03-2013 12:41 PM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by 67_shortfleet (Post 5988981)
interested in bolts for some 1.5 inch blocks i have. Are they still avaliable? $34.90 right?
1 or 2 inch only

67_ShortFleet 04-03-2013 02:40 PM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by way2lo2 (Post 5988994)
1 or 2 inch only
I only need bolts. I can cut them down if to long.

way2lo2 04-03-2013 02:42 PM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by 67_ShortFleet (Post 5989202)
I only need bolts. I can cut them down if to long.
sorry, I didn't read it through thoroughly, yes 34.95 shipped Paypal Way2Lo2@aol.com
thanks

67_ShortFleet 04-03-2013 02:48 PM
Re: 1960-1972 Lowering Block U bolts
 
Payment sent.

way2lo2 04-03-2013 02:55 PM
Re: 1960-1972 Lowering Block U bolts
 
u bolts on the way

jae 04-05-2013 03:58 PM
Re: 1960-1972 Lowering Block U bolts
 
Wish you were still doing the 1.5" blocks, but I suppose I can always cut down a 2".

Would you mind sending me a price for 2" blocks and hardware shipped to 77406? ('71 C10, coil spring rear)

way2lo2 04-05-2013 04:04 PM
Quote:
Originally Posted by jae (Post 5993095)
Wish you were still doing the 1.5" blocks, but I suppose I can always cut down a 2".

Would you mind sending me a price for 2" blocks and hardware shipped to 77406? ('71 C10, coil spring rear)
69.95 for block and u bolt kit. We accept PayPal at way2Lo2@aol.com
Thanks
Posted via Mobile Device

67_ShortFleet 04-06-2013 12:56 PM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by way2lo2 (Post 5989229)
u bolts on the way
Got them today! Thanks

jae 04-12-2013 12:04 PM
Re: 1960-1972 Lowering Block U bolts
 
Got them in yesterday. Thanks!

shawno72 04-18-2013 09:16 PM
Re: 1960-1972 Lowering Block U bolts
 
Hey Boris I'll take another set if the 2" blocks and ubolts.
Posted via Mobile Device

Sid138 04-18-2013 10:23 PM
Re: 1960-1972 Lowering Block U bolts
 
1" blocks and u bolts. Payment and pm sent.

blazins10 04-19-2013 01:11 AM
Re: 1960-1972 Lowering Block U bolts
 
is it poss for 3 in blocks
Posted via Mobile Device

68_chop_top 04-25-2013 11:49 PM
Re: 1960-1972 Lowering Block U bolts
 
send some 2" lowering u bolts for my 68
I had 2" lowering blocks and bolts but was too low
sawed one in half and trimmed the bolts
now I have a big block up front and the rear is too high
going back to the 2" lowering blocks which I kept
but no going back to the bolts I cut.
PM left and paypal sent
thanks

68_chop_top 05-04-2013 09:03 AM
Re: 1960-1972 Lowering Block U bolts
 
Thank you Boris
This is great, send money get great parts in the mail.
Great quality stuff also.
Installed them yesterday, very happy with the look.
The top of the rear tires are just slightly tucked under the fenders.
BEST TO YOU in all you do and thank you for doing this on the forum.

way2lo2 05-04-2013 09:10 AM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by 68_chop_top (Post 6051284)
Thank you Boris
This is great, send money get great parts in the mail.
Great quality stuff also.
Installed them yesterday, very happy with the look.
The top of the rear tires are just slightly tucked under the fenders.
BEST TO YOU in all you do and thank you for doing this on the forum.
And I appreciate the business!!! Thank you!

Tshort1 05-15-2013 02:51 PM
Re: 1960-1972 Lowering Block U bolts
 
Would you mind sending me 2" blocks and hardware. PayPal is on the way. Thanks.

Tshort1 05-15-2013 02:56 PM
Re: 1960-1972 Lowering Block U bolts
 
Payment sent.

way2lo2 05-15-2013 09:50 PM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by Tshort1 (Post 6072858)
Payment sent.
you got it!! be back from goodguys on monday and will ship then.
Thanks

brownbag40 05-15-2013 11:25 PM
Re: 1960-1972 Lowering Block U bolts
 
How much for a set of 1" and hardware?

way2lo2 05-16-2013 07:53 AM
Re: 1960-1972 Lowering Block U bolts
 
Quote:
Originally Posted by brownbag40 (Post 6073735)
How much for a set of 1" and hardware?
69.95 and includes USPS priority mail shipping. We take visa/mc over the phone and accept paypal @ Way2Lo2@aol.com
Thanks

brownbag40 05-16-2013 12:19 PM
Re: 1960-1972 Lowering Block U bolts
 
Payment sent!
Posted via Mobile Device


All times are GMT -4. The time now is 03:21 AM.
Page 5 of 12 1234 5 678910 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com